CarProg unlock full no counter

Don't forget thanks and reputation button

BMW ZCS Decoder, for old BMW cars

   

bmw order.txt

790

59 bytes

Download

hi all

need some help with a fault ive got with an ML320 V6 CDI

2139 check injector bank 1 unknown fault type 1 - stored fault
'no freeze frame data available'
'no extra testing available 'NO F3'

there is no testing available with fault code

we have checked injector coding's, values etc everything is as it should be.

there is plenty of fuel in the car.
tried some injector cleaner also.
car drives fine full boost plenty of power.

if the fault is erased after 20 miles if you use full throttle the engine light comes on and fault appears.

anyone have any ideas for me.

thanks in advance

..........

Hey.
New here on the forum.
I have a IBAC code generator and have the following questions, which I hope there is someone who will respond.
When I enter the last 7 digits of the chassis number and option code, there is also an option to select key number.
How do I find out which key number I need?

hi, in asta j or insignia where is located the immo information in dump file?
i need know what is the addres to read and rewrite in a new bcm for have the same key....
Thanks

Attached Files

bcm 2012 ori - Copia.zip

28

981 bytes

Download

First I want to say you that I'm amateur and is now studying. I read eeprom 93c46, I changed km with nyo4 and when I try to write new .bin file, I recieve the error "Device is silent." What's wrong.

Hi guys
I need help with SIEMENS SID 801 A
I lost the keys and immo is active
Please you very much for help and make immo off of my dumps.
93c56

Attached Files

ori.rar

47

149 bytes

Download

GOOD MORNING BOSSES.

I NEED A RADIO CODE FOR OPEL

S/N: GM0500T9111919

THANK YOU.

DAY11

hello pleas can you give me the clear for this unite airbag kia sportage
95910-3w110

Attached Files

kia sportage air 95910 3w110_mod.rar

38

236 bytes

Download

Need Maps for RCD 510!
Thanks

Hi friends;

I changed ecu of mercedes vito but ı have a problem about engine works. It does not go away from 3000rpm. I have a mercedes das xentry but I can give only one fault code from engine called ''engine does not have authority''!!
So engine can start but not go away 300rpm.

What can ı do??

hi all

I need help to get immo off on vw polo bosch number 0261204156

thanks
mike

Attached Files

24c02polo.zip

34

245 bytes

Download

Good morning I bought a FGTech v53 clone quality 'A, bdm works, the line k works, but I have no problems with the line can someone can help me I've already changed some parts but nothing. thanks in advance.

Hi to Hall

thanks to scraymistake and liga-52

Attached Files

PSA DiagBox V7.02 + Update v.7.32.txt

1517

80 bytes

Download

Hello!
I havea clonned icom hardware from 2 years!
in the last time was stopped working, even the both lamp green blinking !
my itool not detect it
my ista stopped working with this hardware
I tryed to restore firmware by usb.. restore successed
but then itool not detect hardware ip address!
is my icom dad even the 2 lamps green falshed (blinked)?????
please i need confirmation, cause im testing on table without the car

hi
i need original bin for an Opel astra H 1.6 gasolina z16xep

thank you

Were is code in this radio?
If the code is in motorola HC11 0H95B,how can read this processor with XprogM?

Hi, small soft Security byte to UPA-USB programmer

Attached Files

Security byte to UPA-USB programmer.rar

740

175.22 KB

Download

Mercedes DAS 11.2009 DVD

PLEASE help me with this version. TORRENT nearly as possible,
THANK YOU
Offers reward

Im used to work with AUTOCOM 2013 release 1 .

Now i have installed Delphi software , and i have delphi new vci.

When i press test , in the menu of delphi , shows me i have DS100E hardware.

Also the software installed is Delphi DS150E ,
and the interface is unable to work.

What do i need to do.

Hello mates,

I have a problem with Hyundai Microcat 11.2013. I have installed it on Windows 7 Ultimate 32b, and it works fine with the first VIN number, but when you give the second VIN number to it, it gives this error:

"MCHYW caused a General Protection Fault in module WIN87EM.DLL at 0001:02C9.

Choose Close. MCHYW will close."

And, the same thing happens in Microcat for KIA. I have searched a lot in internet but no success, or maybe I have not understood exactly.

Anyway, I hope that someone can help me out!!!

Best regards,
Soheil Tasharrofi.

hi all
pleaz need pin for audi a3 2009 whit edc 16 whit eprom 24cl32
nota : this is a dash dump
thanks allot

hello everyone can anyone tell me if the egr is off right?
the load, but after about 50km you turn on the engine light error
thanks to all

Hi Friends!

I have a problem with Espace (3.0 dci v6) immo, i switch the ignition, and light the immo lamp always, cranking but not start!
I need resync or a new ecu and uch dump!
Ecu is Isuzu Denso Ecu number: 897380 4220
275800 3850
8200453261
8200050919
I read ecu and uch, but the ecu eprom almost empty!
Anyone can help me?

I attached the files:

Thank you!

Regards!

Attached Files

denso isuzu ecu.zip

92

428 bytes

Download

95160 uch'.zip

45

765 bytes

Download

link to activate the autocom 2013.1 Please: Pc:

Hello
Im looking fot tool for audi component protection. I hear there is some tool but i cant find them. If someone know them i would like to know them as well. I have abritus but abritus dont do in 100%.

Thanks in Advance

Hi, i search a Navi DVD from the Denso Navi.
The Navi is in a Ford Focus 2

on UL ?

Bougt a delphi ds 150e from china. Installd delphi 2013 realase 3 and in hardware config does it say ds 100e. See attached photo. Have updated the firmware. doesent change. Did they fool me????

Regards

Matte

Attached Files

Thumbnail(s)
   

Hi to all
I have upa original from elrasoft
I want to read ezs w202 MC68HC05X32
And w203 MC68HC908AZ60
Can upa do this and how can i read them??


Sent from my iPhone using Tapatalk