HI, this is a peugeot which remote key is not working, just normal one, it starts randomly, I Made an immo off from original file in 95P08 and noway, but check engine light is on, it wasn't coming before when no start, and once comes, car starts, but with cartool immo off, it comes always but no start.
Here is original file, I would like a good immo off for it, All the best.
Hi people !
I need some help in this one because I never done it before !
Car is Hyundai H1 2.5td from 2006 width a Zexel ecu 39100-42610
Car is on island of my contry Azores
and I can"t not try it inloco , so I need to know if someone have it made !
do I have to cut any wire ?
I gonna left some pic"s of the ecu !
what is the best solution ?
Thank"s in adavnce
BR
I have a Euro Clone Galletto 3 that I got specifically to tune the Tri-Core ecu on my BMW E90 335D.
I was able to download flash file and get a tune for the car. However the tune will not work and the car shows multiple warning lights (ABS, Traction, etc...) and wont start.
I was able to flash the old tune once but i cannot do it again. So as of now, my car doesnt want to start. I think it could be a checksum problem but ive tried different calculators and nothing worked so far.
I have attached both tune files at the bottom, if you can take a look at them and let me know the problem with it, I would greatly appreciate it!
Hi guys
I want to remove limitation speed from a benz sprinter , the maximum of speed is 110km/h but i need to swich off this limitator,
Can i do with sdconnect? Because i have tried but same...
Thank you
Good day to all. I am looking for where to buy a new key for the Europeans, or the key is already ready for cars (dump subtract). Prices pm. Thank you.
Hi has anyone has any experience of the vdm ucandas looking at getting one for my indy shop,currently using autocom 2013 r3 any feedback appreciated
Thanks in advance
hello friends
little work bmw
grab a x5 that would not start.
has EWS4 new.
went two months ,,and locking.
genere la llave nueva and programming.
and insisted on not boot...then adapt the ecu and ews,, and run.
but lasted only two months .
whats happening because it is blocked,,.again
is one, x5,, 3.0diesel, year 2004
Hi Hhhauto members, I have question about Vediamo, I installed program without any errors in 4.02.02 version that is suitable to my part D mux, but when I try to run Vediamo program says something about key and if I put Yes program goes to simulation mode. So I have question "where I have to write valid key and where I need to click in case to get HW ID?. Cheers
hi, bmw 645 ci 2004
a few codes to sort out, got the software installed and all working, but heres the but my CAS /DME has a vin number for a e63, and my others have a 645ci vin ,its not my vin thought but is my model,, iam not bothered about it being the same vin as the car as long as the software is right for the car ie 645ci software with logic7 etc, the car drives ok, but it has miss-matches and vin errors, I did have a play with winfkp and then my CAS/DME vin became a e60, lost stereo logic7 and voice command sound and wiper intermittent, and auto cancelling indicator's,, back to the point,,,, if I connect any of the software and code or update it will now load the incorrect vehicle files /software/functions, iam will to pay to do maybe remote or phone resolve, help please, I have reading and posting on other forums to get a remote buddy, thank you
NEWEST ISTA-Next Rheingold 3.46.4 with ISTA/P 3.54.2 Native!!
Complete HDD with Expert mode!!
Installed on Windows 7!! Multiple Languages Available!! NOW WORKS ON MOST INTEL i5 AND i7 LAPTOPS!!
PM ME FOR PRICING!!
Works with ALL CHINESE and ORIGINAL ICOM A1 or A2'S!! No ICOM registration required!! Completely offline for 9999 days, no accounts or internet connections required!!
Includes E-Sys 3.26.1, Latest PSdZData Files v54.2, and LATEST BMW KSD!! BUY IT NOW AND RECEIVE FREE MINOR 3.46.x AND ISTA/P 3.54.x UPDATES!!
Why buy this kit? and why buy from me?
We have been supplying BMW ISTA software for years with a high reputation and a name that you can trust. Being involved in many BMW forums providing support and technical assistance to many, you can rest assured you are in good hands. This is the real deal... unlike many, my builds are stable, fast, clean, and NOT CLONED or FAKE!! PC's can also be provided at an additional cost if you do not have one listed below... please contact me for pricing and more details. Plug and Play HDD ready to go and use with your current ICOM (firmware update may be required and providing your ICOM is in good working condition)Unlike many sellers I offer 100% support and most importantly even aftersales support is still offered. With my images you will also receive minor updates which are downloaded and applied remotely by me which other sellers do not provide. Also beware of other sellers offering software as 99% of them are cloned and can lead to several issues including connectivity and programming which can lead to severe failures. Why trust anybody else with your vehicle or client's vehicle when they cannot even support the software they sell? Contact me for more details regarding Expert Mode if you are unsure.
Rheingold ISTA/D - Read and clear fault memory, wiring diagrams, repair instructions, technical documents, activations, live data, etc
Rheingold ISTA/P - Program and encode, update vehicle software, retrofits/conversions (i.e trailer hitch, satellite radio, etc)
Built in Interface Emulator - Connects other interfaces such as K+DCAN, ENET, or OP(P)S to ISTA/D (DOES NOT WORK WITH ISTA/P)
E-Sys 3.24.2 and 54.1 PSdZData Files - BMW Developers software used mainly to modify vehicle coding on BMW F-Series ONLY.
Latest BMW KSD - BMW Standard Labor Time Guide
Complete PC and ICOM Kit's also available for purchase!!
Latest ICOM firmware update will also be provided remotely at no extra cost (I will not assume any damages during this process)
With this purchase you also gain 100% full support and after sales service!! Remotely, Email, or Skype!!
High Quality ICOM's are also available... Contact me for details!!
Buy with confidence from a trusted, respectable, and contributing Member of this and many other forums with many years of BMW experience and knowledge!!
CONTACT ME FOR SHIPPING QUOTES!!
Screenshots:
PC Requirements:
•Intel i5 or i7 Laptop
•Minimum of 4GB of RAM
•500GB HDD Space
•USB Port
•Ethernet RJ45 LAN Port Please contact me before purchasing with PC specifications. PC's can also be provided please contact me for further details.
Package includes:
•1x HDD with ISTA-Next Rheingold 3.46.4 (Multiple Languages Available) and ISTA/P 3.54.2 with Expert Mode (Multilingual)
•1x Security Dongle (Required to run ISTA-Next)
•Free Minor Updates for Rheingold 3.46.x and ISTA/P 3.54.x (remotely installed)
•E-Sys 3.26.1
•PSdZData v54.2
•Latest BMW KSD
•Remote Installation and Assistance (Using Team Viewer or Ammyy)
•Email Assistance
•Skype Assistance
Hello, i have a w168 1999 in my garage when i try to start the car but it doesnt even crank and it has start error on the instrument cluster i tried to program a new transponder but same error and same message, any ideas please?