Hi guys!
I have a problem with a Kia Venga Delphi DCM 3.7, I want to write the tuning file and it comes the error (Incorrect security code).
The problem Does someone of you ??
17448 - Supply Voltage A for Injectors: Circuit Malfunction
P1040 - 006 - Short to Plus - Intermittent
Freeze Frame:
Fault Status: 00100001
Fault Priority: 4
Fault Frequency: 2
Reset counter: 89
Mileage: 243197 km
Time Indication: 0
Date: 2014.10.09
Time: 09:05:36
Freeze Frame:
RPM: 2176 /min
Text: 120 Nm
Speed: 44.0 km/h
Battery Volts: 120.6 V
Battery Volts: 117.6 V
Battery Volts: 139.5 V
Battery Volts: 115.6 V
18578 - Supply Voltage for Fuel Injector Group A: Open Circuit
P2146 - 009 - Open or Short to Ground
Freeze Frame:
Fault Status: 01000100
Fault Priority: 0
Fault Frequency: 14
Reset counter: 100
Mileage: 243441 km
Time Indication: 0 Date: 2014.10.11
Time: 16:51:56 ENGINE WAS stopped!!!!
Freeze Frame:
RPM: 0 /min
Text: 128 Nm
Speed: 0.0 km/h
Voltage: 12.32 V
Temperature: 39.0°C
Bin. Bits: 00000111
(no units): 0.0
Hello.
How to remove display on citroen c2 2007? This is model with bigest one.
I need to remove 93c56 chip behind display but i cant remove display..it is like glued?
Please help.
Thanks
Looking for a reliable and enthusiastic Tuner that is willing to help with after sales problems and understands the needs of my customers in respects to performance extras and lambda / egr / dpf deletes and doesn't cost the earth.
I dont need any wannabe tuners with a hacked copy of winols still living with there mums and with little experience i will be using these maps on customers cars so i will hear all the problems and i just want to minimize all risks please.
I have some problems with my car.
First the ELV died so i had no ignition and no start
So now I changed it with a new one. - Have ignition back but no start becouse immo.
I alredy got the pin for coding but now here is the problem.
I can comunicate with all modules except 25-immo and 47-ccm.
So I cant even connect to it and code it.
Hi
I have a 2003 Nissan Almera 1.5S RHD. This has the ecu/ecm in the cabin. I have a shorting problem on the ecu/ecm side of the ECM Relay which blows the 10A fuse. The ECM Relay pin 3 feeds the ecm at 110 and 112 but does so through the Joint Connector-6 F114 pin 1, but one of the circuits on that busbar is shorting out. I cannot find anywhere a statement as to what is connected to pin 1, though a pdf search has given the camshaft sensor and the crankshaft sensor.
Could someone send me a list of things connected to the Joint Connector-6 to save me cutting the loom
I am starting out in the UK and after a management program for bookings, stock such as oils etc and able to do invoicing and accounts hopefully including labour rates etc.
I will also have a number of individual car parts for sale or multiples of parts that might not always be stock as will be from scrap/breaker cars.
I also run a spares scheme for a classic car owners club and wanted to be able to link there parts and create invoices etc for club customers. The will be two separate "companies" but would be handy to be able to access both bits of information in the same program.
Has anybody got any suggestions or programs for me to try out??
I have a little doubt about the fapp off hdi 406 2002 edc15C2,
I spent the file ecusafe but he asked me to change the value "speed limit" see attachment that must go as value,?
.
