Chrysler WiTech Desktop Software - The program for the diagnosis of Chrysler vehicles.
- O.S.: Windows XP; Windows Vista; Windows 7; Windows 8
- CPU: Pentium/Athlon 1.8 GHz or higher
- RAM: 256 MB of system memory
- Hard Drive: 500 MB of available space
- DVD-ROM
Diagnostic program used by dealers for Peugeot and Citroen vehicles. It only works with the original Chinese and adapters XS Evolution Lexia3.
You can do all as an authorized dealer. This diagnostics software allows you to perform a complete analysis of all models from 1995 to present. Diagnosis is made through the OBD II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
- O.S.: Windows XP; Windows Vista; Windows 7; Windows 8
- CPU: Pentium/Athlon 1.8 GHz or higher
- RAM: 256 MB of system memory
- Hard Drive: 10 GB of available space
- DVD-ROM
Renault CAN Clip v142 Multilanguage | 3.79 GB | 500 MB Links
Renault CAN Clip - the latest diagnostic tool for vehicles of Renault. It contains all the latest diagnostic technology and information base to address all requirements.
- OS: Windows XP, Windows Vista, Windows 7, Windows 8
- CPU: Pentium / Athlon 1.8 GHz or higher
- RAM: 256 MB of system memory
- Hard Drive: 5 GB of available space
- DVD-ROM
Toyota & Lexus USA v4.3.1 [07.2011] English
Win | 9.5 GB
The electronic catalog to search for parts Toyota and Lexus has a search on Vin or model, a transcript of each position Vin, search for the original catalog number or name Toyota parts, as well as search of applicability of details.
Homepage -
Code:
http://sbs.snapon.com
Requirements:
- O.S.: Windows XP; Windows Vista; Windows 7; Windows 8
- CPU: Pentium/Athlon 1.8 GHz or higher
- RAM: 256 MB of system memory
- Hard Drive: 10 GB of available space
- DVD-ROM
Mitchell Estimating (before UltraMate) is the advanced estimating system that comes equipped with Mitchell proven technology to help you automatically create estimates that are accurate, verifiable, and readily accepted throughout the industry. Estimating accuracy combined databases with industry leading automated calculations and repair procedure pages that virtually eliminate errors. The ability for multiple networks of Microsoft Windows users further increases productivity (and profits) of your business.
- O.S.: Windows XP; Windows Vista; Windows 7; Windows 8
- CPU: Pentium/Athlon 1.8 GHz or higher
- RAM: 256 MB of system memory
- Hard Drive: 10 GB of available space
- DVD-ROM
Hi Lads,
Please tell me what is the "make and model" of the Delphi DS350E netbook? Or whats a good strong netbook (not costing a fortune) to use around the workshop?
Thanks in anticipation.
bucknobs.
Does anyone know how you remap any model mercedes? I know you need a replacement file, but where do you get theese files from and how do the get injected?
hello guys. i need navigation for volkswagen phaeton 3.0 tdi. the navigation is Phaeton bye Siemens. i have in italy language, but i need in english or germany. thx again for help .
Does anybody know of a way to carry out late focus 2011 onwards and other models key programming as its not on ids also i have genuine vcm 1 and 2 with paid subscription of ids and im looking to want get the sympton based diagnostics that ford tech line talk about as ive spoken to severall field engineers on there tech line and they have mentioned it is that on etis ? for the module initialization etc
thanks
Hi guys i have problem with my Das/Xentry 01.2014, I have installed Das/Xentry 01.2014 without any problems, but after instalation program hasn't seen my multiplexer C3 (like that one http://upload.ecvv.com/upload/Product/20...508261.jpg ). (I have only Road WLAN avaiable in SDnetControl, no cable connection avaiable). Before when I had Das/Xentry 01.2012 everything was fine, and program saw my multiplexer. Do you have any idea what I should do with my problem ?. Do you have any solution, I would be grateful for help. Regards
Please try to use ordinary programmer to read 93C66/93C46/93C86 data, save the following way operation.
1. Remove the ECU security module, installed in the 93C66 eeprom IC programmer Toyota models corresponding to the transposition.
2. Connect the USB cable to the computer, and then switch to the features Toyota-G position, you can see the relative position of 93C66 the indicator light flashes slowly into the state.
3. Now click on the relative position of the touch switch, indicator light starts to flash at the moment, a few seconds after the light is off, the operation was successful.
4. Replace the 93C66 ECU security module, replace the vehicle anti-theft module is inserted after the first key, anti-theft module indicator light turns off remove the key, and then insert the second key, anti-theft module can be directly after indicator goes out to start the vehicle, completely not synchronous operation, convenient and quick
How to update
1.Make sure your digiprog3 is original Yanhua
2.Close anti-virus software
3.Please confirm the update file you get from us is exactly the same as the pic below:
NOTE:
1. Computer power must connect ok ,ensure the power supply is sufficient.
2. Make sure your computer will not become standby status ,screen saver status when updating .
3. The device power must be stable. EDuring the updating can't without electric.
4.You must close anti-virus software or uninstall ,when you use the windows xp professional SP3 32 BIT SYSTEM .
5. Checking the machine serial number and update files serial number are conformity or not ,whether the Update file have Digi1. Bin and Digi2. Bin
6.Update must choose Digi1. Bin .
I've got a problem with a VW Touareg 2005 with Kessy part number 3D0909137F, I can't even turn the ignition ON, The Kessy unit is damaged, there is no communication with it, I've got a used replacement unit, but in order to code it first I need to virginize it, can anyone help me with a virgin dump? The eeprom is a 93C86. Any help would be much appreciated.
I have a saab in my shop and I can't turn the ignition key.
The customer said this problem occurred after he replaced the battery. Because of this there is no way to scan the car.
on a DIM there is a message as shown in the attachment
steering wheel its not locked I can turn
Any ideas?
![[Image: chrysler_logo.png]](http://infodocs.org/web_images/chrysler_logo.png){kind=logo}
![[Image: eng-des.png]](http://infodocs.org/images/eng-des.png)
![[Image: eng-req.png]](http://infodocs.org/images/eng-req.png)
![[Image: psa_diagbox_1.png]](http://infodocs.org/web_images/psa_diagbox_1.png)
![[Image: renault_logo.jpg]](http://infodocs.org/web_images/renault_logo.jpg){kind=logo}
![[Image: toyota_logo.png]](http://myimages.onl/images/2014/12/05/toyota_logo.png){kind=logo}
![[Image: mitchell_estimating_1.jpg]](http://infodocs.org/web_images/mitchell_estimating_1.jpg)
![[Image: digiprog-update-file.jpg]](http://www.xcardiag.com/upload/temp/images/digiprog-update-file.jpg)
