hi, can someone help me virgin a-class 169 cluster.
Thanks

Hello members

Here a solution to the conversion for to use C4 and c3 in the same software
If you want to use a C4 Double-click on super plus switcher
If you want to use a C3 Double-click on super net switcher
When you want to switch it ,the program das or xentry should be closed
This for internal hard disk , not for external hard disk
pas : mhhauto.comactros
Enjoy...

Attached Files

c3 to c4.rar

576

187.76 KB

Download

Hello! I very need egr and dpf off for this car. Original dump include
ECU 0281013018
8200635663

Very need today!

Attached Files

renault2.rar

323

612.23 KB

Download

Hello friends, I have read a flash ecu.A6421504141.
Do I have to read eeprom Clone?

hello,
is there any solution to remove tampering dot from cluster and yellow service messages that appear after adjusting mileage on bmw e60/e90 other than driving a certain distance??

Hi guys, i work on a Range Rover Sport from 2005. The suspension is low and it's displayed : " 30km/h maximum speed " on the instrument clusters.
With autocom, i read the fault code C1A97 present.
I think it's the accelerator lateral sensor but i can't find any information about it on the net.
Have someone had the same problem ?
Topix is too expansive to have the wiring diagram !!!
Where can i find this sensor on the RRS ?

Thanks a lot.

Hi Guys, Free FGTECH GALLETTO 2 KEY OR CODE CALCULATION FOR ALL


JUST LEAVE YOUR HW ID HERE, WE WILL REPLY YOU ASAP

USE THANKS BUTTON IF YOU THINK IT HELP FOR YOU!

Share this EDIABAS user manual with you, hope it will be useful for you.

Attached Files

EDIABAS — ECU SIMULATOR.pdf

386

274.56 KB

Download

Please someone write the procedure to duplicate Smart Keys of Toyota Passo and Daihatsu Move 2011 (4D). This is NOT all key lost situation. Customer has the key, he needs one more. I have Tango and Orange 5 devices.

I just got a CAS programmer and was playing around last week,and as you may have guessed,my 06 530xit is not running anymore. I read the EEprom of the original CAS and wrote it to another module for test purposes.I was "smart" enough to install the clone on the car and test it.After reinstalling my original,it doesnt recognise the key anymore.I read the clone again,wrote the dump in the original and the remote control works,but it still doesnt recognise the key when inserted in the slot.I hope there is some way to re-sync the key and the CAS again and someone would be able to help me.
Thank you in advance for your help.

hello guys i 'm learning how to make correction of mileage i want to know how for example make that ?

Dash chip type is 95020, in BSI you must find 95160
The mileage is stored in the next lines:
0020: 40 42 0F 00 BF BD F0 FF 40 42 0F 00 BF BD F0 FF
where the next bytes:
40 42 0F 00 BF BD F0 FF - is a mileage

354000km = 20043600DFFBC9FF

In the BSI put FF's as shown here:
BSI type#1
0110: xx xx xx xx xx xx FF FF FF FF FF FF FF FF FF FF
0120: FF FF FF FF FF FF FF FF FF FF FF FF FF FF xx xx

so it was like that
in dash:
0020: 20 04 36 00 DF FB C9 FF 20 04 36 00 DF FB C9 FF

in BSI just i need to put FF in the two line ?
0110: xx xx xx xx xx xx FF FF FF FF FF FF FF FF FF FF
0120: FF FF FF FF FF FF FF FF FF FF FF FF FF FF xx xx


and thanks alot for your support

Hi everyone,

I have got my hands in an Opel Zafira 2004 where a guy have tried to swap the standard 90bhp engine for the 2.0 DTI 110bhp engine.

The engine will fire up for 2-3 seconds at first then the engine light will start flashing. also if the ignition is on the engine light will start flash without turning the key.

I have a Delphi DS100E tester with PDA, and i have checked the immobiliser but it has no errors, i can trick an error by using a not programmed key to be read by the transponder.

The engine has 2 permanent unknown errors 16130A and 16140A on the Delphi tester. After erasing them, the erros appear again right away.

The ecu's and and immobiliser boxes have been swapped aswell, tried to have transponder read the new keys and with new immo box and ecu while starting the car, with the same results.

Both the old and new ECU's are Delphi branded and has the exact same model/type number.

When testing the Intrument on the tester it has a permanent error DTC 17 on the "RPM" signal, but the rpm's in the dash works when the car starts.

Does anyone know if there are differences in the wiring harness from the 90 to 110bhp engine?

I'm wondering is he has connected everything correctly or maybe missing something.

does the 16130A and 16140A correspond to the error codes 1614 and 1613 that seems to be something immobiliser related. ?


Kind Regards
Christian

Hi all I wanted to know what is the best galletto V53 cloned made in china thanks bye

Service Manuals Clark 2010
Size: 2,3gb
Language: English
Type: pdf
Models:
Clark SM-545 Service Manual
Clark SM-549 Service Manual
Clark SM-555 Service Manual
Clark SM-556 Service Manual
Clark SM-560 Service Manual
Clark SM-566 Service Manual
Clark SM-568 Service Manual
Clark SM-575 Service Manual
Clark SM-576 Service Manual
Clark SM-577 Service Manual
Clark SM-580 Service Manual
Clark SM-581 Service Manual
Clark SM-587 Service Manual
Clark SM-591 Service Manual
Clark SM-593 Service Manual
Clark SM-596 Service Manual
Clark SM-598S Service Manual
Clark SM-604 Service Manual
Clark SM-606 Service Manual
Clark SM-607d Service Manual
Clark SM-611 Service Manual
Clark SM-612 Service Manual
Clark SM-613 Service Manual
Clark SM-614 Service Manual
Clark SM-615 Service Manual
Clark SM-616 Service Manual
Clark SM-619 Service Manual
Clark SM-622 Service Manual
Clark SM-638 Service Manual
Clark SM-643Service Manual
Clark SM-646Service Manual
Clark SM-648Service Manual
Clark SM-649Service Manual
Clark SM-661Service Manual
Clark SM-677Service Manual
Clark SM-687Service Manual
Clark SM-688Service Manual
Clark SM-690Service Manual
Clark SM-698Service Manual
Clark SM-704Service Manual
Clark SM-709Service Manual
Clark SM-710Service Manual
Clark SM-711Service Manual
Clark SM-712Service Manual
Clark SM-713Service Manual
Clark SM-714Service Manual
Clark SM-715Service Manual
Clark SM-717Service Manual
Clark SM-718Service Manual
Clark SM-719Service Manual
Clark SM-751Service Manual
Clark SM-765Service Manual
Clark SM-781Service Manual
Clark SM-794Service Manual
Clark SM-5167Service Manual
Clark C500 355 Planned Maintenance & Adjustment Procedures
Clark OH-339 C500 Overhaul Manual
Clark SM-520R Service Manual
Clark SM-535 Service Manual
Clark SM-538 Service Manual
Clark SM-548 Service Manual

Please, can someone convert .pak to .bin for me?

Attached Files

logan dcm1.2 70cp.rar

39

27.97 KB

Download

hello all member please help me with BMW X6 2011 fault code 371C (relay ignition and injection systems .activation short cuicute to B+ .) please all member show me component ralay ignition .

hi friend i have passat 2012 car.
i try some method but not succesfully for checksum fix .

i need a help attached dump and fault screen.
thank in advance for questions..

Attached Files

Thumbnail(s)
   

vw passat 2012 M24C64 checksum error 09.12.13.rar

66

1.94 KB

Download

Hello everybody,

I take a new car BMW X1 2d 177ch produced : 08.10.2009

I read it with my Fgtech V51 (about 5 min) who can tell me if the dump have protection, or if i can flash by OBD

Thx in advance!

Attached Files

X1.zip

51

85.13 KB

Download

HI Brother.
Please help me license for DDDE 7.06 with my ID : BE-D5-24-9F-83.(and version : 07.06-01486-00000)
Thank alot for your support.

Im in deep sh..., please help
Im looking for full bdm soft from ecu delphi

39101-4x750 cr-g

flash 29f200

the old ecu is dead.

Car is Hyundai Terracan 2.9 crdi.

in att. photo of ecu

Thanks in advance.

hi,
i need help,
after update my kts650 i get a blue screen....
i need dvd recovery kts 650
thanks in advance

Dear Members,

Have any body VOLVO FH 400,420, 440 Gear box overhauling workshop manual PDF file, If some one have please share with me.

Regards,
Abrar

upgrade your chrysler starscan to 9.07 version here
http://akamai-public.dealerconnect.chrys..._1.79.ngst

I am writing this since on all my w7 x64 when i wanted to install delphi i received this error:

It didn't matter if i installed clean, on any Delphi i had this and i have seen that others do.
So, this is a guided install on how things work:
1. Download Delphi 2.13.2.0 from delphi website: HERE
2. Install it
If you have CDP with 5digits sn chose DS150E
If you have CDP+ with 6 digits sn chose DS150E NEW VCI
3.After install copy from all you need patched main.exe
4.CLOSE YOUR INTERNET CONNECTION.
5.Open Delphi enter your sn and key (you have HW KEY on archive)and start activation, a pop-up will appear,chose yes and save the xml file.
6.Request that your file it's activated HERE
7.After you have your activated file, open Delphi, enter again sn and key,start activation, a pop-up will appear, this time chose NO,and open your activated file.

If you are on x64 you will see the error above. Do not worry, close delphi and copy from patch 64 the ok files and now open it again.

At this point you will see that all works but you have Delphi 2.13.2.0

Close Delphi, open internet connection and run it again. Go to Help->Check for Updates and let it update your files.
IMPORTANT:
Once the update it's done, copy original files from patch delphi x64 to delphi install folder.
If you don't do this you won't be able to activate again Delphi.
Now do again steps 3,4,7
3.After install copy from all you need patched main.exe
4.CLOSE YOUR INTERNET CONNECTION.
7.Open Delphi, enter again sn and key,start activation, a pop-up will appear, this time chose NO,and open your activated file.
And again you will have the error.
8.Close Delphi.
9.Copy from all you need patched x64 ok files to Delphi install folder and

NOW YOU HAVE A FUNCTIONAL DELPHI 2.13.2.2 ON WINDOWS X64

Optional: If you want to deactivate update checks go to Delphi install folder and rename wyUpdate to let's say wyUpdateXXX and the checks will stop.

Please keep in mind that Delphi cars and trucks have a little different update from 2.13.2.0->2.13.2.2

If you like my post and it helped you please press THANKS.

Hi. 'wanna make some coding changes (like tele aid not present) in the coding settings in control unit adaptations of the electronic ignition control module, is that ok, or will it have any other repercussions like it'll forget my keys or something.

Hello, please provide me with the steps of performing offline scn coding in das and with a key generator to get the code string.


Thanks in advance I really appreciate your help


Best regards
Ghassan

Here i attach files for repair Kess V2 tokens, video, photos and nxp dump inside! wink

No need to desolder chip, just use Chinese Jlink.


Password by PM

Pressing thanks and Rep+ button would be nice!

Thanks

Regards