|
|
E46 320D 150BHP ECU problem? |
Posted by: power44 - 09-16-2014, 04:44 PM - Forum: BMW Group BMW, Mini Discussions.
- Replies (10)
|
 |
Hi I have an e46 150 bhp which fails to start and also the coolant temperature gauge goes to maximum when ign is turned on, I have been told that this is an ECU fault and to replace the ECU which I am in the process of looking for.
My questions is what component inside the ECU is failing to cause this???
Any help would be appreciated if someone has come across this before.
Bosch part no 0281011122
BMW DDE7 794 624
|
|
|
Autocom old vci no KL comunication |
Posted by: pinout - 09-16-2014, 04:00 PM - Forum: Automotive Hardware.
- Replies (1)
|
 |
Hello friends, I have a problem with my old Autocom (old version 2 pcb )
does not work with K / L protocol, I tried with old cars Fiat with cable 3 PIN
and also with old cars Vag with cable 3 pin ,
K-line works well, does not work with K / L
I checked the relays and all work, I checked all the cables and they are ok !!
I checked with a multimeter and not found voltage on L ,
instead on K found 12v , maybe SI9241 is dead ?
thanks for help
|
|
|
Vitara 97 key |
Posted by: cocopetrosani - 09-16-2014, 03:23 PM - Forum: Automotive Airbag, Dash, ECU, IMMO.
- Replies (4)
|
 |
Did enyone make key for vitara? I want to know if asking pin.I try to make a second key with sbb and the car said allready have 4 key in memory no more position.If I erase all key from memory will let me to write again ,or ask for pin? Thank you.
|
|
|
Another delphi bluetooth thread... |
Posted by: Panasync - 09-16-2014, 01:54 PM - Forum: Automotive Software.
- Replies (1)
|
 |
Hi,
I have been using delphi bluetooth for at least a year now without any problems.
Bought me a so called good quality interface the other day, with one board and NEC relays.
I can see it when I search for it, can also connect it to the computer.
But when I try to search for it in delåhi settings I can't find it, even if i choose the correct com port in USB/BT(com port). It will not connect.
But if I choose Bluetooth (direct) in the settings, I can connect.
This normally works ok, but with my earlier VCI I had no problems using USB/BT to connect via bluetooth.
And also the seller told me not to use bluetooth (direct), but he could not tell me why, not to use it?
Any idea?
|
|
|
Instcode 2008 |
Posted by: bucknobs - 09-16-2014, 06:09 AM - Forum: Automotive Airbag, Dash, ECU, IMMO.
- No Replies
|
 |
Hi,
Please has anyone got "instacode 2008" key software or later they can put up? the old ones on here are not working or maybe refresh them?
Thanks in anticipation.
Bucknobs.
|
|
|
|