Hi guys! Can anyone help me reading this PIN code?
The car is a Fiat Palio 2004 with Delphi BSI
The eeprom is a microchip 93CL66B
Any help would be much appreciated, thanks in advance.
Hi,
it seems that my Galletto clone doesn't support Tricore Bootmode.
So as I read some clones can do it.
For me the question arrises what's different between clones wich support tricore Boot Mode and the ones which doesn't. Any possibility to fix this?
Next Question: Anybody here from germany who sells a tuntertool clone?
I read on a edc 1.4 for E290 TD the 24C02 eeprom.
I change the value with immo tool V1.1 to put off the immo,
I cut the two CAN wires
But the engine doesn't want to run, then I ask some help to look after my dump with immo off
Hi everybody new day, new problem :-)
I've got a spi evc (clone I think ) and I can't get to detect the spi when plugged in to the serial com port ... Any ideas would be gratefully received :-)
A friend of mine had a problem with injector seals on his Mazda 6 2.0 CD with Denso RF7 ECU. The seals where fixed but the DPF clogged. So the mechanic made 3 6mm holes on it. But now the car gives 4 Errors and is in Limp mode:
Hello i have a ford galaxy 2.0 tdci 2007 and i put on diagnostic TEXA and tryed to regenerate the DPF but it wont do it. so For DPF off what program do i need to use and which chip on ecu i need to read ?? PLEASE HELP
Anybody have a 100% working solution for DPF off on MB Sprinter 319 190hp (edc17)? Have tested with one solution but get "high soot level" after one week of driving..
Hi gays . I am looking for dumps from body and ecu for fiat punto from 2001 1.2 16v elx from same car
body reference
magneti marely 46795991 eeprom 93lc66(i lost original dump and cant find it )
engine ecu bosch me7.3H4 Bosch HW 0261206980
Bosch SW 1037354913
manual gear
or at least virginized software for engine ecu, now car running with immo off but i want to do all as it must be....
Hello..i have on my garaze a vw caddy 2012-13 model year and it came with destroyed timing belt..we fixed everything on cylinder head,( changed valves etc) we put a timing belt on right signs but now doesnt want to start whats the problem with these cars? do we have to change anything else after a damage like this? thank you in advance
1. Start with a clean install of Windows XP SP3
2. Install Java 1.4.2.15 (attached the install file in this post)
3. Restart PC and if you are not installing VAS-PC in a Virtual PC, install virtual drive software like DAEMON tools
4. Go to control panel---->Java Plug-in---->Click on update tab---->UN-Check 'check for updates automatically'---->click Apply and then close it.
4. Mount the VAS-PC 19.01.01 Base CD and start installation
5. After installation completes, restart PC
6. Run the VAS-PC Hotfix for v.19.01.01
7. In the desktop open the shortcut for 'Configurator' - In that, click 'Java Settings' ---> In the 'JVM' box, it should show '1.4' - close the program. (if it's not showing this, refer to point no.4 in the 'FAQ' section below)
8. Open VAS-PC from shortcut in the desktop. It should load and then close.
9. Go to C:\SIDIS\home and open the 'label' file with Notepad and change the 'period' value to some date in the future, for ex. period=26/04/2016 - this is done to prevent the 'out of date' errors in VAS-PC. Save the file and close it.
10. Open VAS-PC from desktop shortcut--->click on Administration--->Enter workshop code
Now it will ask for Distribution Center/Importer No. - enter any 3 digit number in the numpad and click Q on the on-screen numpad
Now it will ask for Dealership Number - enter a 5 digit number on the numpad and click Q on the on-screen numpad
Now it will ask for dealership identifier - Enter a name and click Q on the on screen Keyboard twice.
11. Close VAS-PC.
12. Go to start menu--->Run--->type 'regedit' (without the quotes) and press enter
13. Go to HKEY_LOCAL_MACHINE\SOFTWARE\SIDIS\ENV and find the registry entry "THE_REAL_CDROOT" - this entry contains the CD drive letter that VAS-PC uses for installing brand CDs - Right click this entry ---> Modify---> then change value to the drive letter of the CD drive you are going to use to install the Brand CDs. If you are using a virtual drive, change this value to the virtual drive's drive letter. After changing the value, click OK and close the registry editor.
14. Mount a Brand CD (VW/Skoda/Audi/Seat/Bently) and open VAS-PC.
15. Click on 'Administration'--->'Install/Update CD'---> It will ask whether to install update, click OK ---> now brand CD will install.
16. Repeat steps 14 and 15 to install the rest of the brand CDs.
FAQ
----
1. For configuring the VAS5054A, refer to point no. 2.2 - Here
2. To set your Ediabas.ini file correctly for Update programming in VAs-PC, refer point no. 1.6 - Here
3. If you want to install ODIS in this system along with VAS-PC, refer point no. 1.4 - Here
4. If the 'Configurator' is not showing JVM version correctly, refer to the PDF file inside the RAR file (given as attachment below at the end of this post) - in the PDF file, skip to page 4 and follow the instructions.
nissan a33 2.0 chasis number CAUA33 A08024 nissan immo code i use 5523 display wrong code i attached the picture ICu units
there 2 fault code p1612 immo?dongle fault
p1610 immo locked
i use the default password 5523 it display wrong code
any one please can help advance thanks
Hi guys a e90 320I giving a fault O2 sensor before cat bank 1 and 2 INTERCHANGE... Engine light on
I checked the o2 sensors , the loom , did a software update and that fault is still there previous owner replaced whole engine because of that issue.
hi, I'm working on my ecu, it is a citroen c2 me7.4.5 a vts, I have defined some maps, but I get not find the correct axes for kfzw, kfzwop maps, and map lambda.prdria someone help me find these axes. I leave my project that it will help someone who is working with this ecu.a greeting. if they believe there is some other important map for my ecu, I'll be grateful to help me.
fixed bin folder contains all needed bin folders for the various needs of 07.2014
D- use for the good quality clone
D2- use for the lesser quality clone that gives the cal 872 error with the D version.
T- for use with SDConnect
no password needed, please show your thanks and add reputation.
whats the problem with these cars? do we have to change anything else after a damage like this? thank you in advance
:
![[Image: Picture-0306BzVks7_thumb.jpg]](http://www.img-share.eu/main/image_view/Picture-0306BzVks7.jpg.htm)
![[Image: 14uey2q.jpg]](http://i62.tinypic.com/14uey2q.jpg)
![[Image: mts6pu.jpg]](http://i61.tinypic.com/mts6pu.jpg)