Hi folks, I am looking for the latest Western Europe maps and poi for an Rns -510 on Torrent please. Many Thanks

offer only for old forum members (members who helped this forum , minimum 50 posts and one year old)


special keygen price (for mhh members): 150euro (and upgrade from 2012.2 kg is 50euro)
normal price is 200


keygen is locked to 1 computer (you cannot resell it or run it on other computer)

keygen details : http://hex2stuff.blogspot.com/2012/12/au...-2123.html

for those interesed : mail me at [email protected] , NOT PM !!! , and include in mail your forum username

Attached Files

Thumbnail(s)
   

pm me

http://mhhauto.com/Thread-volvo-ENCRYPTO...PTOR-2013?

Hello friends! For who have installed Xentry 07/09 or 11 2012 and has issues with the No Acces Authorization Startkey (saved succesfully but Xentry does not open) and used the VBOXSERVICE to make the Appid 253 during installation... remove the Vboxservice.exe from the startup folder and reboot (sometimes need to add a new Startkey)

Good luck!

Prosacn 5.9 keygen: free

We have a new Xentry Tab with WLan . Cables are looking from Compakt 4
The MUX is a little PC with Windows 7 and you only need a Terminal Soft an a Standart PC .

Hello. There are ADP186 version of the program 2008 . 3. Downloaded from rutraker org version autocom adp186 2010.1. Installed the program, updated the firmware. The scanner program sees, port finds, and, with auto does not work writes that the wrong HW key. Tried from the old version is also does not work . Tried the crack from the 2011 version also does not work. Please tell me that you can think of.

So the interface is chinese Multidiag 1.2010. When I first connect it to a car it connects flawlessly but when I need to connect it a second time to the same car it will have trouble connecting to a certain ECU like engine for example. It will give me an error that it can't recognize the type of module it needs to connect to. This happens on almost all cars I try to connect to. Would this be a fault in the electronics board of the interface or something else?

hello all member please you tell me about the way calibrate air suspension rang rover sport 2006 with VCM.help me

Merry Christmas and a Happy New Year for all

Free key calculator for :

DAS developer
Xentry developer
SMART developer
WIS standalone
WIS net
EPC net



Dont forget about THANKS button

Attached Files

CarProKey_setup.rar

13602

3.12 MB

Download

My ECU Fiat Albea 4AF.PC FWH206.180BCLN and ECU Fiat Doblo 5NTF.T4
pls, help me about immo clear for both
i had try use immokiller and Carsoftware 5.2 and the both don't start vehicle with light sercurity dasboard is on .
because ,before both vehcle sometime start with light sercurity off ,sometime can not start with light security on .
my drum file for Albea and Doblo .

[url=http://www.mediafire.com/?fi3z5l2bwoc6m8g]Albea IAW 4AF.PC[/url]

[url=http://www.mediafire.com/?2xjxuxnblci0bzn]Doblo IAW 5NTF.T4[/url]

best regard .

Hello everyone, firstly, im new here .
A month ago I bought two Autocom CPD for car and trucks. They are gold and with Bluetooth, now both are working with 2011.3.5, i had the VCI not found problem but its solved unconnecting Wifi. My first question is: there is other solution that allow me to use autocom soft connected to internet? Its useful to search about error codes, etc.

I was reading a lot about autocom machines, colors, mobos etc, and now i think i didn't buy the right machine. I found a tutorial to write injectors code on a Renault Kangoo 1.5dCi, we saw step by step... one of my partners in my workshop has a van like that, and we have not the option to codify injectors!

We couldn't find that option in every cars we had tried.

Is it normal? Is it a software or a hardware problem? Do cloned autocom allow you to use it as an original one? I would like to know more about it, because now im feeling a bit stupid


Thanks a lot.

Hi, i installed 09.2012 Xentry Version. I don't find a Xentry cal.sli fix for this version. Do we need a blacklisted fix or not? Can anyone tell me if it is necessary to change the cal.sli or how to fix blacklisted mux in Xentry?

Wish all fine Christmas time.

with regards
anonimo

Hi Guys,
i just have bought a Xprog-m form China to read out the CPU of the old Mercedes Keys. So i have connected the Adapter like its shown in the diagramme and installed the programme, but when i´m trying to read out the Cpu there is allways "Device is silent. Timeout error". First the green LED is on for a moment, and then the red.

What could be the problem? I have tried 8bit,16 etc.. dont work.

Are there any ideas?

hell guys pleas be careful be careful
http://www.epc724.com

this site is big cheater and he cheat me For DEV2tool and Volvo decrypter
he just has picture and make edit with photo editor
All his staff is bull shit and he is lier !!

pleas never and in any case don't trust him!!

he cheated me and never refund me

Globaltis Saab 1-2010 Rar Torrent

Attached Files

Globaltis-Saab-1-2010.rar

517

23.13 KB

Download

Hello,

i´m searching for a good program / software which includes complete wiring diagrams for cars. The Esitronic from Bosch is okay, especially for german cars.

Very, very important is especially the wirings and pins who come the ECU. I want to know which signal comes over which pin to the ECU (for example ABS, air mass flow sensor,...)

To give an example: i need to know the pins on newer toyota landcruiser models. there´s noting you find in esitronic.

i really need a source to get these exact wiring diagrams to test and record signals with an oscilloscope for exact and proper fault finding.

has anybody a recommendation for me where to get the wiring diagrams?

best regards,
Whey!

Hello!
I need PIN for making reset BCM, I make dump of DASH, can you help me?

Attached Files

Corsa-D 2008_P0013264279_M35080.rar

108

822 bytes

Download

Replace the Original MainMenu.exe file in directory
C:\Program Files\Toyota Diagnostics\Techstream\bin\
(1st Backup your Original file somewhere OR Rename it...)

Now, use these Keys for to Activate your Techstream:

EU = cadd5ff6bedd0ed14c4c6a99a55ee36c30001211210425
NA = 82e76402ded813796e40038d167afd8b30001211210425
JP = 69cd4d0544159a5a8638a2b0ef40c76430001211210425
OTHER = 19d420a36be0448f5b845b26b0945ef130001211210425

NOTE: DO NOT change the "User Type" when you will run
your TS for 1st time! LEAVE IT with the Default
option! "Official" Dealer/Repairer with other words...



Hardware ID = 55555555555555555555555555555555
Software ID = 7.31.003
Date Start = 21-11-2012

original:

1.support K-Line Protocol

2.firmware version 1.48(M--VCI)

3.Can be Active tests.

4.Can be Select Customize Function

5.firmware version 2.0.1(Mini-Vci)

Copy:

1.Do not support K-Line Protocol

2. firmware version 1.4.1 (M--VCI)

3.Can not be Active tests

4.Can not be Select Customize Function

5.firmware version 1.4.1(Mini-Vci)


China Clone: M-VCI,Toyota Mangoose, Mini-Vci,copy Allscanner Is exactly the same. do not work 1996--2004 cars.
Good luck!!!

Hi all,
have somebody virgin dump for thic airbag ECU please?
A906 446 05 42 eeprom 95320
Thanks
Regards
Ivan

The process of installation,help my

best regards

Hello everyone

Description: Assistant for disassembly of Mercedes-Benz.
This program is in the form of video clips showing correct disassembly/Assembly processes, adjust the gaps and all the technicalities involved in the repair of various car brand Mercedes-Benz.

First, click on the reputation or thanks, and then request the password pm

best regards

Attached Files

Mercedes Disassembly Assistant.rar

518

13.11 KB

Download

Please if is a possible to get eurotax repair estimate multilingual torrent.

thank you

I am looking for MCS II COMAND Navigation DVD 2011 or 12 North America to use with Mercedes GL450, 2007. It will be a huge help for me if someone will share with the link to download it or where to get it. Thank you in advance!

Hi guys , I am using a WIS/ASRA Standalone version . The problem is when I launch the program , only SSL icon appears . Where are the rest of the icons ?

hello all member i have problem with digi dm18 when i run show that auto update firmware and erase tye 2 error.please you help me .

hi all,

i am newbie at VW PIN programing!!!,what software must i use to extract pin code from dump readed from eeprom dashboard golf4


thx in advance

I want to personally extend my christmas season greetings to all the members of mhhauto, staff and all forum members alike.I hope the knowledge we all gain here will be used to balance our selves and others needing help, even more i hope the new year will be fruitful to all mechanics, technicians and shop owners/operators in the automotive business all over the globe who have had a bad and not so bad year in 2012 and is trying to stay afloat in all the economic stress we feel daily. Thank you for reading my friends.

BMW E-Sys 3.18.4
247MB | zip

Old version, but maybe someone will need it.

Attached Files

BMW E-Sys 3.18.4.txt

195

55 bytes

Download