BMW authorized dealer asked 960 euro for new module.
Everybody says the module can not be repaired THEY ARE WRONG at least mine is working no problem for one week now.
All you need is good soldering skills with hot air solder.
Mine problem was when ignition on just BMW logo then restarts and on and on same thing.
I don't have pictures of the board inside because somebody else was soldering but I will remember the chips for the last of my life.
The problem is in the board which is placed last in the metal box in my case first is the cd player second is dvd navigation and the board is the last.
You don't have to dismantle all the metal box just the aluminum panel that is under the module, then the s**t board will apear you will recognize by the ram memory the similar look from notebooks.
If someone can place a picture here with the aluminum panel off I can guide you with the rest of the process.
DON'T PULL THE BOARD OFF you can brake the fiber optic cable holders I did it on mine had luck they were repaired.
I need pictures and will point which screws to take of and.......
Sorry for my bad English
Hello Folks!
I found and want to share another online resource with tons of stuff. I don't know if the gens are included, you have to check this by yourself. Guess it is helpful for individuals.
Enjoy and say THANKS if you like it!
I work with Mercedes clk 430 and my problem is i not have ecu box, but I have buy used ecu (Bosch 0261206303). If I understand is right so I must married this box with car. I have star Mercedes. What is best solution for this? Immo off I think or use star for married this box?
Now work diagnos and i have program
hc11_org.bin_renew.rar (165 Bytes, 9 views)
But i not understand how i coding.
This picture have 4 choice
I take number one but ask after code, where can i found code?
I sold my Autocom r1 now wanted to buy a new vci, I just wanted to know, their opinions, which the best Chinese Autocom r3 vci or Multi-Di @ g Access J2534 Pass-Thru Device i, or VCS Vehicle Communication Scanner
thanks
Hello guys,
Here is the BMW CARSOFT 6.5 software download and the Installation instruction.
During diagnosis, please note:
It is better to perform first a total diagnosis on vehicle. The total diagnosis gives you a complete idea of the global condition of the car. It is also possible that an error is stored in several modules.
To start the diagnosis, turn on the ignition of the car and keep the ignition position at "2".
If no unit is responsing, please turn off the ignition several times and/or make usre the diagnostic plug is properly connected!
You should connect the device to computer via RS232 port or PCMCIA slot. Please dont use the RS232 to USB port adaptor. After you connect the device to car and computer, the green indicators should be on.
Hello everybody
I'm locksmith , I was looking for things related to transponder key
I have key programmer Ad900 with software Transpronics .
A friend of mine use Piaggio bike , but he lost both keys , he took me a technology color black . And i see software Transpronics have Floder EEprom , in eeprom have " 49. Peugeot Piaggio [T] " , use chip T5 for transponder key , i have transponder key and keyprogammer , but haven't dump file .bin from technology color black .
Please teach me , how to get dump file .bin , thanks everybody so much.
My english is very bad , if you read this far, you so good ^^ , have a nice day
The Vehicle Commnication Module (VCM) is a high performance, ruggedized, vehicle serial communications gateway. This device provides multiple vehicle serial communication interfaces to meet the requirements of all Ford Motor Company vehicles.
The VCM unit is housed in a magnesium enclosure with a tough, protective, plastic cover for the PCMCIA expansion slot which can, for example, be used for wireless LAN cards or memory expansion. The VCM device contains five LED status indicators to provide the user with a visual mode of internal VCM, vehicle, and host device (e.g. NGS Classic’s T-Handle, PC, Pocket PC/PDS, and Laptop/IDS) operation.
The VCM also has detachable cables for connection to industry standard high-speed host interfaces as well as to the vehicle under test. The VCM 2007.7 DVD includes both IDS (Integrated Diagnostic Software) and PDS (Portable Diagnostic Software) tools.
Product Contents
• VCM
• PDS
• Cables
• Case
Product Details
Application Overview:
Integrated Diagnostic Software (IDS) is the next generation diagnostic tool. IDS integrates WDS software modified to run on an off-the-shelf laptop with the Vehicle Communication Module (VCM) currently used in NGS+ and PDS, and a new Vehicle Measurement Module (VMM).
Vehicle Diagnostic Connectors:
The VCM 16-pin DLC cable is used to connect the VCM to the vehicle. The VCM and VMM connect to the laptop through the Ethernet-USB Adapter Cable (H406/H416).
ELSA - program for diagnosing and repairing cars Concern VW AG. Contains a description of technology of repair, auto maintenance, diagnosis of various vehicle systems, wiring diagrams, bodywork, standard time for work performed, etc.
Elsawin contains all information for diagnostics and repair of Volkswagen, Audi,Seat and Skoda cars till 2012! Covers detailed and complete description of the technology of repair, maintenance, diagnostics, electrical circuits, body works.
This is the 4.0 version and data is VOLKSWAGEN Database the release 02.2012.
Software is fully in ENGLISH (but you can install it also in English, Hungarian, Dutch, Danish, Spanish, Italian, Chinese, German, Dutch, Norwegian, Polish, Romanian, Russian, Turkish, French, Czech, Swedish, Japanese, etc.) with clear english installation instructions.
Anyone can help with to solve that error(response of DLM request:Can't connect the socket to lisener)
I got that error one i connect to FDOK to program controls via online access.
Does anybody have Isuzu IDSS? ive seen a couple posts on the forum but all links appear to be dead i just need software not asking for kg/crack. thank you very much for your time and have a great day!
hi, i've a problem with opning the Sdconnect after i've installed EWAnet i'm running 03/2012 Xentry, all was working before i install EwaNet 01/2012, now when i click on Sdconnect all is marked in red (the PC Internet and Mux, connetion between them) and when i modifi anything the button OK is always Gray !!! any one encountred such problem !! (ewanet have the new admlin tool)
I received my All data 10.40 from china on ha-disk,It has 29 files on disk,name DM1Q111 to IMP28Q111 and All data_10.40 making all 29 files,please how can i go about to install this files to get the complete software,I'm new in auto and this is my first time of receiving such a software,thank toy
i want to look up the description of fault code in Star Browser..
i know from 01.2011 star browse switch to IE...
i try to look at this at DAS but it can't turn on IE...
so anyone please help me to fix that problem
Regard.
hi
I have a problem after update to 2011.3. After
install & activation it says that i need to update the
VCI firmware. It goes OK, but after this CDP connects to car without problem, but when i click "Read fault codes" i get message "VCI not found" . The weird thing is that "live data" work almost everytime OK
Any fix for this or suggestions
thanks
Like to know what the latest firmware CD is for the W211 NTG1 comand head unit, Europe.
The unit has now W211 589 13 22 00 loaded.
I also read on the net that:
- W211 589 14 22 00
- W211 589 16 22 00
are available for head units.
I really would like to know if those can be used on Europe comand units or not.
UPDATE (just for your information if you run into the similar problems as I did):
I found out that W211 589 13 22 00 is the latest version for Europe Comand systems. The other 2 disks are for US comand systems and should NOT be used to upgrade the firmware on European Comand systems.
This update solves some problems with the latest map dvd's giving read errors etc. The firmware in the Navi unit in the trunk is automatically updated with a new map release, but the firmware in the Comand unit must be updated using the above mentioned firmware CD's.