I did a update on my GT1 to version 57 en and after all when well I did the update as ask by DIS and my head never worked again.
Did work well on Dis 53 en BUT after update cames up with error 200.166,no communication with the head.
I am looking for GT1 Dump of 28f400 working on DIS 57,can anyone share it by here or Pm???
2002 Peugeot 307 model, cannot start at all, it crank alright but cannot start. after hocking x431 launch scanner to the car, it brought up a lot of permanent fault and secondly the wiper kept swinging on the screen even though i have not touch the control on the steering while, and you cannot put it off as well, and the tail lights are on, when i scan the immo unit, there is no code from there... below are the report from the scan:
*permanent fault communication on the wire data with the top of steering- column ecu.
*permanent fault oil temperature sensor. short circuit to positive.
*permanent fault communication on wire data with the rain sensor.
*permanent fault right side lamp control.
*permanent fault courtesy lamp control.
* permanent fault communication with the airbag ecu.
*Permanent fault communication with the engine wiring housing.
*Permanent fault left lamp short circuit to positive.
permanent fault boot lighting open circuit
permanent fault courtesy light open circuit.
permanent fault the outside temperature sensor short circuit
*ultrasound sensor-- intermittent fault
*remote intermittent fault .absence of communication with the built in systems interface.
please i want to know what exactly could be fault and how do i solve this, what do you think is the main thing that when it is changed or tackle all this will be rectify, i will pay extra bonus to he who gives the best of the solution
For usa car lovers, here you can find a workshop manual for cadillac Cts year 2008 2009.
I've posted here because workshop manual section don't work.
If you find useful press the thanks button.
Looking for the original eprom and flash file for 2001 CITROEN XSARA2 siemens SID 801 memory 93C55 and BSI Valeo memory 95040.I need your help.Thanks in advance
I am about to build my own "high Pressure" Transducer for car diagnostic.
I searched a lot and found the picoscope has WPS500X, but I was shocked by its price
I don't want to build such "complicated" device, just a simple one for my own porpuse in my workshop with range of -15 to 500 psi (-1 to 34.47 bar).
I am wondering is there anybody here having WPS500X and would be so kind to open it up for me, just to see which type of pressure sensor they use in it
I installed DAS Xentry 7.2011 and its working perfectly,
when i run SDNC i see the funny icons down in the toolbar, but when i double click the on it , it dosent open.
what shall i do ??
thanks in advance
regards
I'm intending to buy (ELM 327 Car Diagnostics USB Interface).
My question is, does ELM 327 support this kind of vehicles, and if not is there any cables that can be plugged to (Elm327) so it can be supported for diagnostics,
here the list of cars i'm interested in:
* Scania bus super haiduk (2000 - 2012)
* Scania truck (113- 114- 112)
* Man (f2000), Man (bus)
*Volvo (f1 truck 2000)
*Toyota (hiace 2000-2012), Toyota (hilux 1995-2012)
*isuzu (any kind)
i really hope to make this work on trucks, and any information will be helpful,
Hi,
for newbies or others, this image nrg will allow you to learn how to make some diagnostics with lexia and proxia.
You can run it from image, CD or install it.
Language is French.
If there is any mistake, contact me.
Cheers...
Hy, Fabia I do, of course rotten cables, the exchange still reports an error: 16517 Lambdasonda small signal. Re-use, with the ignition in the 0.37, 0.40 to 0.50 V is required so that data are considered suitable. When I run the test, while the neo B1S1 reports, and will throw an error. I replace the 5 lambdasond, and nothing.He met with the one already?
I have big problem. I updated Xentry from 3/2011 to 3/2012 but i don't know how can i update Das from 3/2011 to newest version. Can someone help me? I search all forum for that and i found nothing.
no worry , i am just want to know, nothing else. 
Thanks.
