Looking for a lamborghini parts catalog, i believe its called the SDF but not sure.
Lambostuff.com has an online catalog but they only have photos of the diagrams.
Any help in locating it will be much appreciated.
VAS 5054A is a professional diagnostic tool for VW, Audi, Seat, Skoda. VAS 5054a supported functionsvas 5054a read and erase ECU fault codes, including Check Engine, ABS, SRS, transmission system, Radio, heating. ect. Turn the check engine light off. The VAS 5054A is a universal diagnostic interface for the vehicles of the Volkswagen Group and all OBD vehicle systems from other manufacturers.
The integrated Bluetooth interface connects the vehicle with a notebook, desktop PC or test system. No cables are needed for vehicle diagnostics using the VAS 5054A.
The range of the wireless Bluetooth connection is 5 to 10 meters,depending on the environment and the type of Bluetooth adapter used on the PC side. The Serial Port Profile (SPP) is used for data transfer via Bluetooth. Different Bluetooth security levels are supported.
The vehicle protocols are handled directly in the VAS 5054A.
This ensures fast response times and a reliable real-time behavior independently of the PC operating system. Every time a connection is established, the VAS 5054A software is identified with the version installed on the application PC. The VAS 5054A thus automatically adopts any new features provided after a new software version has been installed on the application PC.
The diagnostic application and the associated Diagnostic Base System are installed on the application PC. The diagnostic base system can access the VAS 5054A via Bluetooth or USB.
Access via Bluetooth: After a connection to the VAS 5054A has been set up, the Bluetooth software provides a virtual serial COM port (Bluetooth Serial Port Profile). The Diagnostic Base System uses this COM port to communicate with the VAS 5054A.You need to specify this port when you install the diagnostic application.
Access via USB: You can also connect the VAS 5054A to the application PC by using the supplied USB cable. Windows detects the VAS 5054A through Plug and Play, and automatically installs the drivers copied when you installed the diagnostic application. Setup of the VAS 5054A is then complete and the device is ready for use by the diagnostic application.
VAS 5054a language available: English/Spanish/Germany/French
The following vehicle bus systems are supported:
K line (ISO9141-2)
High-speed CAN (ISO 11898-2)
Low-speed CAN (ISO 11898-3)
J1850 (SAE J1850)
if is possiblle to make and
who knows the procedure for immo off on Land rover defender2 2.5 tdi td5. ecu number is MSB101330.
the car start and fails after 2-3 seconds.
or I should make new keys.
[attachment=6356][attachment=6355][attachment=6355]Dear All:
I recently bought a Super MB Star diagnostic system (AKA Star 5). After struggling for a week to install the Virtual Machine, and update the software (especially Xentry), I have been struggling to get the multiplexer to communicate with my 2005 E320 CDI’s computer (through its OBD II port). Several helpful hints were provided to me through the http://www.benzworld.org/forums/. However, one of the senior members in there suggested that I could get more help in this forum – do here I am.
I have enclosed a document that explains and shows some of the screen shot of my recent attempt to make the communication happen. As suggested by one of the good folks in the MB forum, I apparently could simulate the MUX connecting to teh car by providing 12 V DC to it.
So, please kindly read the attached document, and see if you could resolve my issue. Your help is much appreciated in advance.
Cheers,
Farid
PS. The vendor claims that I have shut down the virtual machine incorrectly, and as the result a series of unwanted files have gotten generated, and that is why the software cannot recognize/communicate with MUX. Does it make sense? If so, how can I get rid of those files (of course beside shutting the system correctly - next time that I am on it?).
Dear colleagues, @digitalbac has advised me to ask my question here again.
I use the Xentry/DAS Developer, 01/2011 (2010-12-09).
I have only problems with access to the ECU (W211 series) and SBC contoller (211 series), and also the hole w203 series. Always the same error message: "Intitialization of diagnosos multiplexer failed. Possible causes: The link between the diagnosis multiplexer and the diagnostic socket is interrupted. The link between the diagnosis multiplexer and the diagnostic unit is interrupted. The voltage supply at the diagnostic socket (circuit 30 and (or) circuit 31) is faulty."
All other functions and access to the controller runs fantastic, without any error message!
My question: Is there expecting an improvement if I replace the cal.sli, is it a Blacklist Problem from MUX?
Hello, I comment a little problem I have with the Elsa, to see if something happens to someone like that.
The program works ok except me the link has "system breakdowns led to location ..." the fact is that I click on the link and nothing, I give open in a separate window and tells me not to find the address, you know that problem may be, I attached the translation of a snapshot.
Translation: Diagnosis system, measuring and reporting VAS 5051 vehicle in the "guided troubleshooting"
Hi, see if someone made me a hand, the air conditioner does not cool my A3, not connecting the compressor, the gas level is correct, the new pollen filter ... After doing those things, recharge, filter change, still without cooling and without connecting the compressor, then I got the vag com, I gave judgment in the high pressure sensor G65, I've changed and remains the same. According to the vag com so the compressor is in control mode
Anyone know how it is coded to inform the controller that the sensor is Ok. <attached screenshots of the reading taken with the vag.
The Jaguar, Land Rover Integrated Diagnostic System (IDS) will be the only equipment that provides complete diagnostic coverage of current and future Jaguar, Land Rover vehicles. The IDS package replaces the Worldwide Diagnostic System (WDS). The IDS application will perform the identical functions of the WDS and allows dealership technicians to diagnose and serviceJaguar, Land Rover vehicles. As the new diagnostic tool, IDS will be required to perform diagnostics on future model year vehicles. One IDS Package is recommended for each WDS in the dealership.
IDS is enhanced WDS software that was modified to run on a standard laptop platform, and utilizes the VCM and VMM. Moving IDS to a laptop helps technicians by integrating access to both diagnostics and service information on a single, powerful machine.
hello!
I have toyota rav4 year 2011, I want to added second smart key!
is the toyota streamtech cable can do this job?
or
which tools are best for this job?
thanks
Hello, I have managed to install the latest version of the autocom truck but I do not have the update either in 12v and 24v. Who would have a solution? thank you very much
Colleagues!
Need a hint.
Set and DAS Xentry 10-2008, 03-2009 updated for ... Set all without any problems. Further, a trial run Xentry (already updated 03-2009) leads to an error [2221-29] No right to access. ...
Tell me what went wrong, please post a link or not found on this topic
: Headbang:
install fiatecuscan
copy the files fiatecuscan.exe in the installation directory
launch the program from fiatecuscan.exe (not fiatecuscan2.exe)
works 100%
Well, as many of you you know, we had 1x Poll (Voting...) in my SD 1.2012 Thread about
IF i need to create & to post 1x "Unofficial" FULL Version about SDMedia 1-2.2012...
Also as anyone he noticed, MHH Forum and after some "Attacks" that we had the last days
Today we Restored the Latest & FULL SAFE Backup from 12/2/2012!
The Votes about SDMedia Subject was a lot...
So, here it is this "Unofficial" Release about FULL SDMedia 1-2.2012!
ANYONE witch he running ANY SD Version from <--- 11.2011 and BACK, simply he can Install & to use this Release!
Also & MOSTLY for those witch they NOT having any SD System and they want to use SDMedia
simply they needing to have Adobe Reader + the Basic Video Codec Pack in his PC and they can Join!
So for those NONE SD Users simply you will make those:
1. Mount the Image (.iso) from ANY Source that you have her!
2. Browse the \MEDBIB\ Folder
3. Choose & run you Language via the .url Files
4. Voila!
Enjoy anyone!
NOTE:I DID NOT ALLOW TO ANYONE to "Re-Pack" and to Post this Release Here on MHH
or in any other place WITHOUT to receive my Approve about this!
![[Image: bJ8uM.jpg]](http://i.imgur.com/bJ8uM.jpg)
![[Image: gyhWV.jpg]](http://i.imgur.com/gyhWV.jpg)
![[Image: uQ9XB.jpg]](http://i.imgur.com/uQ9XB.jpg)
![[Image: MnCWS.jpg]](http://i.imgur.com/MnCWS.jpg)
![[Image: sistemaelectrico.jpg]](http://img191.imageshack.us/img191/5176/sistemaelectrico.jpg)
![[Image: climaa32.jpg]](http://img338.imageshack.us/img338/3447/climaa32.jpg)
![[Image: sinttulo1ne.jpg]](http://img849.imageshack.us/img849/3690/sinttulo1ne.jpg)
![[Image: 2d9e6f196631.jpg]](http://i040.radikal.ru/1106/3d/2d9e6f196631.jpg)
![[Image: afbeelding3cq.png]](http://img191.imageshack.us/img191/4701/afbeelding3cq.png)
![[Image: sw4shd.jpg]](http://i41.tinypic.com/sw4shd.jpg)
![[Image: 1e6i9t.jpg]](http://i43.tinypic.com/1e6i9t.jpg)
![[Image: mhww01.jpg]](http://i42.tinypic.com/mhww01.jpg)
![[Image: 14oalqh.jpg]](http://i44.tinypic.com/14oalqh.jpg)
![[Image: 2hgviw3.jpg]](http://i44.tinypic.com/2hgviw3.jpg)
![[Image: jf7ymr.jpg]](http://i42.tinypic.com/jf7ymr.jpg)
![[Image: v3dgyw.jpg]](http://i40.tinypic.com/v3dgyw.jpg)
![[Image: 1zgydjc.jpg]](http://i40.tinypic.com/1zgydjc.jpg)
![[Image: 9788c8.jpg]](http://i40.tinypic.com/9788c8.jpg)
![[Image: 2wedyys.jpg]](http://i43.tinypic.com/2wedyys.jpg)
![[Image: 10f2ob7.jpg]](http://i42.tinypic.com/10f2ob7.jpg)
![[Image: zu1e9c.jpg]](http://i43.tinypic.com/zu1e9c.jpg)
![[Image: 2zibt6f.jpg]](http://i39.tinypic.com/2zibt6f.jpg)