TIS2Web is a Technical Information System which is provided via Internet Explorer and provides assistance to both privately owned workshops and fleet customers on the technically correct repair and maintenance of Opel vehicles.
You have direct access to the extensive information provided by Opel, direct and at first hand.
The sections below give you an initial overview, a few extracts of the types of service information available and a table of the vehicles which are described in the TIS2Web System.
Hardware Requirements
We keep a wide range of data available in TIS2Web in the form of texts and graphics. To ensure that these data are transferred to you at the best possible speed, TIS2Web is hosted in a particularly high performance central server environment. However, the actual transmission rate is equally dependent on the local system environment such as e.g. the Internet connection and the Internet Service Provider.
To ensure that TIS2Web provides the best possible service and meets your expectations, we recommend the following system requirements for your PC and Internet access.
Hardware:
* Processor: Intel Pentium 1.5 GHz
* System Memory (RAM): 512 MB for document view application; 1GB for diagnostic and re-programming
* Hard Disk: 40GB Hard Disk
* Interfaces: USB 2.0 , Serial, VGAMonitor: 17 inch monitor
* Internet access: DSL High Speed
Software:
* Microsoft Windows operating system, from Windows 2000 Professional, Windows XP (SP2)
* Microsoft Internet Explorer from version 5.x, 6.x or 7.x
Year / Date : 2011 Version : v32.0 B System Requirements : * Processor: Intel Pentium 5/1 GHz * System Memory (RAM): 512 MB for document view application; 1GB for diagnostic and re-programming * Hard Disk: 40GB Hard Disk * Interfaces: USB 2.0, Serial, VGAMonitor: 17 inch Monitor * Internet access: DSL High Speed Software: * Microsoft Windows operating system, from Windows 2000 Professional, Windows XP (SP2), Windows 7 32 bit * Microsoft Internet Explorer version 5.x from, 6.x or 7.x Graphics * Basic mode: 800x600 Pixel / 256 Colours * Expanded mode: 1024x768 Pixel / 65 636 colours Language : Multilingual Medicine : None Description : Database Data for the repair of car brand Opel. Mount the disk image program PowerISO.
Hello Forum members. I really tired to find a solution to my problem but
I've seem to come to a road block. Im running das 01/10 on a macbook pro with vm. Im running a sdconnect from work heres some picture to better describe my errors. Im thinking that since my ethernet port goes through my macbook first then its bridged to my vm is causing the problem. hopefully i can get some help.
I am looking for files to launch Das and SimDas 11.2011 directly.
I have an another problem with Xentry Sim, it launch SimDas but SimDas have error : No language defined! How to fix it ?
Thanks
Good evening to all.i need to know how install new hardware on autocom adp 186.is there a tutorial about this hardware?i looked on the forum but i did not found nothing.when programme starts to install it ask me for product code serial number and hardware key,the problem is that i dont have the hardware key.i know that later it will need activation(that is another problem for me).
please if someone has the same tool with me(adp 186)just geave me a litle help.
Will Tech2win read abs on GM medium duty? I don't remember the J protocol but the regular tech2 is the only tool that works on these. 4 channel Kelsey-Hayes. 99-2002 B7 School Bus is what I need to view data from.
Next question is there a torrent yet? What hardware do I need? Thanks in advance. Wolf0r
Update the electronic parts catalog EPC (Electronic Parts Catalogue) Car Mercedes-Benz brand on three discs.
Year/Date: 02.2012
Version: DW 02/2012 Delta2 (4.2.1.0)
Developer: Daimler AG
Description:
Server version EWA Net: SW 1.15.183.4
Version of the EPC Net: 1.28.11
Version of the data EPC: DW 02/2012 (4.2.1.0) + Delta_2 Update
Extras. Information:
This is not the full version and update, which installed the previous version. Distribution is framed as a MDF image, so to mount the images you want to use the virtual program emulator of CD / DVD-ROM drive, for example: Alcohol 52%, Daemon Tools, UltraISO, etc. For installation you need to mount the first disk to the virtual EPC_0212_b1 DVD-ROM, run the EWA Admin Tool and the EPC on the tab to click "Update database of EPC / Update EPC database". During the installation of the updated database will be updated as EPC and server software to version EWA Net SW 1.15.183.4. After installation is complete, the first disc B1 repeat the process for the second disk containing the updated Delta 1, and then insert the disc in a similar way with the updating of Delta 2. The medicine comes up from the previous hands.
Contents:
1) A disk image EPC_0112_1of1_b - B1 contains the first disk upgrade (program + data)
2) A disk image EPC_UPDATE_0212_DELTA_1 - an update to the Delta 1 (placed after the disk B1)
3) The disk image EPC_UPDATE_0212_DELTA_2 - an update to the Delta 2 (disc placed after Delta 1)
hello joseph yesterday I have activated xentry xentry but using a 220 204 c while in diagnosis occasionally went out with a square sritto (inilizzazione of the multiplexr not successful
possible cause and remedy the connection between the crossover and the diagnostic port and the connection between the equipment interotto star diagnosis multiplexer and interotto) how I can solve. thanks
hi to all master any help generous for installing a mvci driver i got an message ENDED PREMATURELY DUE TO ERROR i tried all version of this installer but no luck
my cable was a chinese clone
I am interested to buy a Odometer Correction Kit such as Tacho Pro Plus V2008, but with whom would you recommend me to buy.
Who is the best Odometer Correction Kit?
Year / Date : 2012 Version : 1 Developer : vs Web Developer : kunden.stahlgruber.de Language : Multilingual Crack : Not required Description : The program ATRIS Stahlgruber provides information on spare parts cars and trucks. Data on passenger cars since the 60s, with a cargo of 80. Since 2002, the program is executed in the shell of TCD and using data from TCD, except for the information on spare parts in the program integrates information about the norm-hours, fuel tanks, maintenance intervals, timing belt installation labels and identification plates. This program contains a cross-reference numbers, and stock STAHLGRUBER, + wholesale price of downloading a file Artikel.dat rest full analogy TCD. There is a search for the original number, the number Stahlgruber, you can see the list of applicability of the details, select a car by the engine, to enable filtering by brand or manufacturer, also contains illustrations and photographs of many parts. The program comes ATRis Stahlgruber 3 DVD, can be installed in several versions, from minimum to maximum + network. Compared with TecDoc has less cross - fewer errors, respectively, working warehouse of spare parts Cam Atris is 1-2 disk 3 only for those who need Techniks Extras. Information : When installation asks for the primary customer number Stahlgruber of 6 tsifr.Vvodim any number of the attached file and safely operate. In order to decouple from the date after you run the attached registry file. apdeyte If no password is needed is automatically updated itself. For those who need parts for Shtalgruberu write to the PM.
Hello
i'm trying di read file of ducati monster s4 with mpps v12 but have some problems: i use protocol of ducati monster s4r , new version bike, with identical ecu iaw59m.
The read file is wrong but i don't know
Have you any solutions?
Hi, i installed the program but when I want to run it a found this message:
No database found, change database path!
I google it but found 0 help, any advice? thanks
![[Image: captura1cs.png]](http://img193.imageshack.us/img193/7804/captura1cs.png)
![[Image: captura1aa.png]](http://img69.imageshack.us/img69/3027/captura1aa.png)
![[Image: captura2sj.png]](http://img683.imageshack.us/img683/898/captura2sj.png)
![[Image: captura3o.png]](http://img121.imageshack.us/img121/9832/captura3o.png)
![[Image: captura4mc.png]](http://img13.imageshack.us/img13/3428/captura4mc.png)
![[Image: captura5d.png]](http://img820.imageshack.us/img820/5135/captura5d.png)
![[Image: 2vmzzu9.png]](http://i43.tinypic.com/2vmzzu9.png)
![[Image: 10hrls2.gif]](http://i42.tinypic.com/10hrls2.gif)
heres some picture to better describe my errors. Im thinking that since my ethernet port goes through my macbook first then its bridged to my vm is causing the problem. hopefully i can get some help.
![[Image: jmr6Z.jpg]](http://i.imgur.com/jmr6Z.jpg)
![[Image: 207356f2ea589d65d7d68dbd6b93ac55.png]](http://i30.fastpic.ru/big/2012/0307/55/207356f2ea589d65d7d68dbd6b93ac55.png)
