Hi,

Does someone have ORI file for Fendt 900 series with scr?

Thanks for your help,

Sape

I have next problem on my Lenovo R500, Succefully installed Clip version 129 or 134 or 137 and registrated. Clip installed on XP SP3 with installed Microsoft NETFramework 2.0 3.0 3.5 and 4.0. Launch Clip, recognize VI Aliance interface, click on auto VIN recognition and program found vehicle, i manually enter 0 in field Computer test and click on button in program but nothing hapend. Not close this window, not open new window, simply nothing. Anyone know what problem is ?
Its anyone install Clip on T500, or R500 or any similar Lenovo laptop and program work ?
Or there is some version of Clip which work on this laptop ?

I'm looking for any service documentation, workshop manual for agricultural equipment case ih and new holland, tarctors, combines .etc.
Thanks in adwance

Hi Guys,

I've signed up because I've made a big mistake and I'm desperate to find some help to solving this problem

I have an early (W639) Viano which has a faulty LCD on the dash cluster (its only visible when it cold).

After some research I found that the later face-lift dash cluster (A639 446 4421) was compatible albeit with some wiring loom re-working.

The problem is the new dash obviously needs SCN coding which requires a registered MB-STAR which sadly I don't have access to so I thought I'd try and be clever!

I'm a programmer by trade and I have SPI/EEPROM programmers + in-circuit clips kicking around so I thought I'd give this a whirl myself.

I sort of fell at the first hurdle because I read the chip wrong, I assumed it was a Microchips 25LC64 (64mbit) but its a 25LC640 (64kbit) so the backup I've taken from the chip is pretty much junk because its been read over and over again to create a 8MB file (instead of 8kb).

I've tried chopping the bit that looks correct (thankfully the dash re-writes a header to the IC when its powered up so I could work out where the data starts) but I've not been able to get it to function correctly again..

I'm wondering if anyone has a HEX/BIN dump from a dash of the same model that I could try?

Thanks for reading

Hello!
I write here because i found an interface at home but i don't remember which...
Hope you can help me find it out.
I attached the photos.
Thank you for your help.http://kepfeltoltes.hu/view/141102/20141...es.hu_.jpghttp://kepfeltoltes.hu/view/141102/20141...es.hu_.jpg

Hi guys
I will buy a FVDI full but i want to know if FVDi can used as a proogrammer for read and write the file as programer galleto, or kess, so if i want to change the file to do dpf off egr off, can i do with fvdi?
Thank you

Hello MHH members,

I looking for Firmware of FVDI interface.
My current version " F07369 "
So I need newly than F07369.

Thank you for your HELP !!

Morning,

I am wondering whether somebody has a parts manual for a 1999 Kaldness V620B, fitted with a 3208 engine.

NN69

Good day!
Results of testing of software from different threads ...
... about keygen demo / full
... compare files 2013 / 2014
Test based on VHD file with SuperSport's 2013.3.3 good software.

#1 2014 Cracked
http://mhhauto.com/Thread-Delphi-AutoCom...ED-VERSION

#2 2014.1 + kg
http://mhhauto.com/Thread-Autocom-Deplhi-2014-1-Keygen

#3 2014.1 crk 20euro
http://mhhauto.com/Thread-Autocom-Delphi...ion-20Euro

#4 2014.1 wo dongle act
http://mhhauto.com/Thread-DEPHI-2014-1-solution
Info : thread deleted

Best regards,
Dmitry

Autocom-Delphi-2014r1-test.rar

741

4.93 KB

Download

Hi friends, does anyone can tell me the immo pin code from this dump? It's from Seat Ibiza 1.9 tdi 110hp-AFN, ECU-028906021EK.
Immo 6H0 953 257B - TI tms370 28pin.

Attached Files

immo.rar

66

223 bytes

Download

BMW / Navteq
EUROPA - Road Map für BMW Professional (CCC) 2015 (3 DVD)
Kurzbeschreibung

Navigations DVD

Hersteller: BMW / Navteq
Artikelnummer: 6590 2 350 554 - DVD PART NUMBER 21865/21866/21867

Produktbeschreibung

Dieses DVD Set ist ausschließlich für das BMW Navigationssystem Professional (SA 609) in Verbindung mit einem CCC (Car Communication Computer) zu verwenden. Das Produkt Professional ist erstmals als Set bestehend aus drei DVDs erhältlich. Jede DVD enthält ein anderes Länderset und zusätzlich das Hauptstraßennetz von West- und Osteuropa. Digitale Straßenkarten führen Sie schnell und zuverlässig an ihr Ziel. Nebenbei werden Sie auch noch informiert über Hotels, Restaurants, Tankstellen und interessante Sehenswürdigkeiten.


Abdeckung
Land: Country: TMC: DVD 1: DVD 2: DVD 3:
AND Andorra Andorra •
B Belgien Belgium × • •
BG Bulgarien Bulgaria ø
DK Dänemark Denmark × •
D Deutschland Germany × •
EST Estland Estonia ø
FIN Finnland Finland •
F Frankreich France × •
GBZ Gibraltar Gibraltar •
GR Griechenland Greece ø
UK Großbritannien United Kingdom × •
IRL Irland Ireland •
I Italien Italy × •
HR Kroatien Croatia ø ø
LV Lettland Latvia ø
FL Liechtenstein Liechtenstein × •
LT Litauen Lithuania ø
LUX Luxemburg Luxembourg • •
MC Monaco Monaco •
MK Mazedonien Macedonia ø ø
NL Niederlande Netherlands × • •
N Norwegen Norway × •
A Österreich Austria × •
PL Polen Poland ø
P Portugal inkl. Madeira Portugal incl. Madeira •
RO Rumänien Romania ø
RUS Russland Russia ø
RSM San Marino San Marino •
S Schweden Sweden × •
CH Schweiz Switzerland × •
SK Slowakei Slovak Republic ø
SLO Slovenien Slovenia ø
E Spanien inkl. Kanaren Spain incl. Canary × •
CZ Tschechien Czech Republic × ø
H Ungarn Hungary ø
V Vatikanstadt Varican City •
BY Weißrussland Belarus ø


Weitere Infos

Stauwarner (TMC-Funktion) in folgenden Ländern: Deutschland, Österreich, Schweiz, Frankreich, Großbritannien, Italien, Niederlande, Belgien, Dänemark, Spanien, Norwegen, Schweden und der Tschechischen Republik
Freier TMC-Service ist nicht in allen Ländern verfügbar. Für den Empfang des verschlüsselten TMC-Dienstes bietet BMW länderabhängig einen BMW ConnectedDrive Vertrag an
Verzeichnis der BMW Service Partner
Jetzt wieder mit kompletter FALK POI-Datenbank in allen 32 Kategorien.

Compatible with :
Fahrzeugmarke /

BMW 1er (E81 / E82 / E83 / E84) DVD System Professional (CCC / SA 609) 06/2004 → 09/2008
3er (E90 / E91 / E92 / E93) DVD System Professional (CCC / SA 609) 03/2005 → 09/2008
5er (E60 / E61) DVD System Professional (CCC / SA 609) 12/2003 → 11/2008
6er (E63 / E64) DVD System Professional (CCC / SA 609) 12/2003 → 11/2008
X5 (E70) DVD System Professional (CCC / SA 609) 03/2007 → 10/2009
X5 (E72) DVD System Professional (CCC / SA 609) 05/2008 → 10/2009
X6 (E71) DVD System Professional (CCC / SA 609) … → 10/2009

DVD1

14 x parts 165 mb + 1 part 125,40 mb

DVD2
12 x parts 165mb + 1 part 131 mb

DVD3
11 x parts 165 mb + 1 part 42mb

Pls help me immo pin .I attach bin display opel meriva year 2004.thanks

If anyboday is facing the problem with indicators lamps on Alfa Romeo 147 or Punto and Stilo
the cheapest and easiest solution is new driver ST VNQ830M.
I repaired a lot of them and costumers are very hapy because they save money with new body computer and coding.
Body computers of each of this three car are a little different but they all have the same driver.
       

Looking for this tool

If anyone had it,please PM me

Hello all!
I can't find CSK with 95040 EEprom. BSI - Not immo Texton.
Please can somebody help?
I read EEprom and see different,i don't know this version.
I need find CSK for prepare pcf7936 transponder.
Thanks!

Attached Files

95040.rar

43

442 bytes

Download

Hello
Need ori file VW T5 2.5TDI R5 (BPC) 174hp

EDC16
070997016L
394150

MAN_Cats II_01.05.2014 DVD Share
Only for recovery DVD。
maybe your can Extract InstallShield® "data2.cab" file,Transplanted into Other laptops.

MAN_Cats II dvd.txt

156

73 bytes

Download

As title states, is anyone available to help out with this?

Thanks.

Hello.

Im in need of a mapped file for the following ecu:

8L0 906 018 K
1.8L R4/5VT

Thanks in advance,

Gary.

Hi.need full dump(flash + eeprom) for EZS 209 545 050 08- Q3
this is mercedes W203.
Thanks.

hello there,

I need some help with VAS PC V19.01.01

I have successfully installed VAS PC V19.01.01 on my laptop and also installed vw, audi, skoda, seat flash. The problem i am announcing is very rare and i am not able to find any solution on the internet.

After restarting the computer and logging in the system i can start VAS PC v19 without any problem and use it just perfect, but if i close the program it wont start at all. It takes 2-3 log off/log in from the systems or 1-2 restart the machine in order for VAS PC v19 to start it.


I have installed it in windows xp sp3, Installed hotfix for vas pc v19.01.01, installed java v15 fix, but i am still having same problem.

I have also installed in a different laptop but i am announcing the same problem.

can someone please help me with this?

thank you

I have a GMC6500 and need to replace its pcm, vin number of car is 1GDJ6H1BXXJ514102 and the original pcm is 16238212. What i need to know is the part number of any other pcm that can work on this truck through the EPC, thx.

Hello,

Originally I have 1999 C43 AMG.

I have installed from 2000 CLK55 - EIS,ESL,ECU and Engine, the car drives well!.

Now rear windows do not work because CLK55 has only 2 doors and does not recognize rear door modules in C43 4 door. This program is stored in EIS so I need to use C43 EIS/ESL with CLK55 ECU!!

Is it possible to take IMMO information from C43 ECU and install in CLk55 ECU?

Or maybe if I can make CLK55 ECU virgin and marry to C43 EIS?

C43 ECU - Bosch ME2.0 #0 261 204 692 MB# 026 545 29 32 HW 39.97
CLK55 ECU - Bosch ME2.0 #0 261 206 084 MB# 029 545 08 32 HW 39.97


Thanks,
Paul

help me, inmo need original, or dump off inmo citroen c5 1.8 16v 2001 sagem 2000-1 psa 21646517-6 9643915380

Attached Files

Thumbnail(s)
   

hi to everyone.

I have accidentaly deleted the "star utilities" shortcut. i can find it nowhere. do i have to run the prepare bat.?

Does anyone have cracked or can crack it for some reasonable price?
Do anyone selling it?

Someone know a good software and hardware to read and edit ecu by obd2 for diesel truck like gmc sierra 6.6L diesel, Chevrolet silverado...
i want to edit dpf delete by myself with tuning tool....i know they sell lot of programmer to do that but i want do by myself with tool to directly read ecu and edit by obd2 connector or maybe to connect direct at ecu bench.

if someone know i search that

thanks for ur suggestion all

Hallo , i need DPF OFF solution for this car .

Passat B6 2.0TDI 103kw BMP

ECU : 03G906021AB
SW: 03G997021J 394115


Many Thanks !

Attached Files

03G997021J.rar

146

64.69 KB

Download

can i read this eeprom 24c16 with xprog?? can somebody tell me if i can?? regard's