I AM EXREME BUSY THESE DAYS, ANSWERING PMS MAY DELAY!
the next 12.2014-01.2015 version is almost finished I was busy adding many improvement. I still need some testers before making it public. Please pm me, and give your skype name. Thanks
Update 10.12.2014: If you get error at shutdown and a blue screeen. Then please update or remove the installed vmware-addons software within the system.
Update 23.11.2014: anyone has problem with WIS. Please check if the downloaded folder has WIS and not EPC inside. If only EPC then please donwload again. additionally add the registry file provided by Starfinder to make WIS standalone. sorry
This is the 2014-9 edition of the unique native running Universal Xentry/DAS System without needing any pc virtualization.
It is a portable system with lot of MB stuff. A Windows XP based system installed in VHD-File, which can be located everywhere (USB or Harddisk) and being booted and run natively by a bootloader (on a USB-Stick, local harddisk or CD). So no change to the running system and without the need for any virtual pcs.
with the Bootloader+VHD+DBs methode:
+No need for to make any change on the laptop you will use. Even you dont need to have a harddisk in the laptop.
+No need for seperate harddisks for each diagnosis System.
+No need to be worried if the laptop has a irreparable software or hardware error, and it will not run.
+No need to split your harddisk to many annoying partitions.
+No need to mixup your harddisk with many Windows versions.
+No need to waste ununsed space on each system, when you can place data on a common partiton.
+No need to be worried about having any unwanted changes to the diagnosis system from someone else, as it has build in protect sandbox-functions.
+No need to fear from ruining your laptop system when removing or replacing the diagnosis system.
+No need for big harddisk storage for huge vmware files, when you only need to have DAS/Xentry (29GB)
+No need for virtual PCs anymore!
+No need for powerful cpus anymore!
+No need for driver configurations at host system anymore!
This system has 3 parts: - Bootloader: This needed to get the base system loaded and run. It will scan all partitions for the vhd file and load it from where it is found. - VHD-file: This is the base system, where Windows XP with MB software are in. - DB-files: These are the DB files for the MB software as WIS, EPC, Sdmedia... have not to be on same drive as Bootloader or VHD.
Once Xentry/Das system booted, you can add your hardware specific drivers, if there any missing. I integrated more than 1,5GB of drivers. Before doing anyting new, restart the system 2 times as the first boot will detect changed hardware (takes time), and the seconds installs it. See the folder "may needed" on the desktop, if you have non-working drivers in device manager. It is optional to install all drivers. You need only to have get your USB-rs232-adapter running if you use c3, or LAN-driver if you have SDconnect.
The keys (Xentry/DAS/WIS/EPC) are hardware related, so you will need to insert new keys each time you use this system with new hardware. (see may needed folder)
You can use this system on real PC or in a virtual PC. I prefer to use on real PC where it works at fastest and portable.
For real PC you need (new method): 1. A boot device to install and run the bootloader e.g.:
- Your internal harddisk of your PC
- USB-Drive
- CD/DVD-Drive (bootloader placed on CD/DVd iso) 2. for the VHD-file: you have to place it in ONE-PART (contiguous) on root of a writable drive, this can be:
- internal HDD (fastest)
- USB-Drive (Some old USB-Sticks are really slow and may cause bad system performance) 3. for DB (optional): they have to be placed it on root of a drive, no need to be contiguous, this can be:
- Your internal harddisk of your PC.
- USB-Drive (Some old USB-Sticks are really slow and may cause bad system performance)
- burned to a DVD/BR
PS: after you place the "dbtarget"/"medbibtarget"/"DisAssTarget"/"StarfinderTarget" directory in root of a drive, run the fix bat file to make the link correct! If are in subdirs, they will fail to work!
For Virtual Machine you need (old method):
1. for the VHD-file: you have to add this as first IDE virtual harddisk file. (use show all files)
2. for DB: they have to place it on root of second IDE virtual harddisk file or any real drive connected to the virtual machine.
3. You must configure your virtual machine com-port.
PS:
-If you want only Xentry/DAS and not WIS-EPC-SDmedia: then you dont need to download Medbibtarget and dbTarget files. -If you get bluescreen with 0x0000007B error and no error file: in the windows boot screen (where at with the 3 seconds delay is) try to select other HAL. Old celerons for example are single core CPUs adn may cause this error by default the setting for multi-core CPU is active. Test also other options if this not not worked, one of them may still work. -If your PC hangs while loading Windows animation (or on black or blue screen) and you have the VHD on the internal harddisk: you may have the AHCI issue of SATA drives. Windows XP has no direct SATA support and this causes this hang. To fix this you may change your BIOS setting. Try searching after SATA Configuration or On chip SATA. Select Legacy IDE or Native IDE instead of AHCI. Windows XP doesn't have all drivers to recognize AHCI, so disable it . I installed several AHCI drivers in the system and my laptop with intel chip is working in AHCI mode. Please share on which Hardware it worked with deactivated AHCI, and on which with active AHCI (an AHCI device is active in device Manager). In Native native IDE mode, the SATA controller looks and acts like a standard ATA controller that the basic driver will recognize. If not worked then place vhd on usb-drive.
-if you have black-screen at bootloader, no boot media found when selecting boot media or windows 8 boots directly: then disable UEFI if active. deactivate: Secure Boot, deactivate: Fast Boot, activate: CSM (Legacy Mode insted of UEFI). If it is not posible, use MBR-BIOS-boot anabled PC. Updating BIOS may help, as some MBs have a non working lagacy-boot mode. To enter UEFI from Windows 8/8.1 see: http://www.youtube.com/watch?v=gDcf3Ow6XjY
-If the DAS shortcut doesnt work: I applied the standanlone DAS file, but updating the system with addons has disabled it. So Running DAS outside Xentry will not work. Please apply the patch -DAS32R2 (07.2014) again. It can be that also other functions were disabled by the last updates. Please share if someting doesnt work or missing.
-If you get a blue screen when you boot and get 0x0000007E "WDFLDR.SYS" error: then rename this file in c:\windows\system32\drivers. Dont blame me, blame MS. You can mount vhd in windows 7/8 or use a vhd mounter program. (I allready applied intelppm-fix to prevent blue screen caused by chaging between AMD and Intel CPUs)
-Communication problem: The most problem can be the used USB-rs232 adapter. I use my own programmed adapter for that, which works great! PL-based adapters doesnt work good.
The system content:
DAS/Xentry 09.2014 - Multi-Lang:-(base)-------------------------------------------
+ all addons + DAS languages + Missing pictures Xentry + bin folders + Standalone DAS + IE restrictions removed + Blacklist fix + Startup fix + Offline programming fix + cal.ini's set for PartD C3 + Internet filter removed + the lame antivirus removed + Wallpaper with notes + prototype 212,207,... fixed + "may needed" added with useful stuff + BG update service disabled + tomcat7 shutdown fixed + Star user pass: User$star2004
Further components are:
Vediamo v4.02.02 - Multi-Lang:-(base)---------------------------------------------
+ com2 port set (as Xentry) + Patched (Luis Andre) + unique cbf from Xentry 11.2012 till 9.2014 + 1079 Vediamo cbf files
WIS+EPC v07.2014 - Multi-Lang:------------------------------------------
+ seperated WIS/EPC DB-DLs + Linked to external DB + WIS work within Xentry + Password in header EWA-NET + Session Token Validity fixed + IE kiosk mode (disable by Fll) + User: admin, PW: adminl + Price List PLV68-1 6.2014 De/En + Pass saved by IE + "may needed" updated*
SDmedia v01.2014 - Multi-Lang:------------------------------------------
+ NoTrkUnmogBus German only + NoTrkUnmogBus English only + Linked to external DB + sdmedia dir fix + SDmedia Lang change + "may needed" updated
Starfinder v2008 - En only:--------------Disassemby Assistant v2003 - En:-------------Vintage Mercedes-Benz Repair Info Library (unique):-----------------Mercedes-Benz Technical & Training Info library (unique):-----------------------
----------------------------------------------------------------------------------
+ Acrobat Reader 7.0.8 + No Low space alert + "Open file location" menu + MFT and FS optimized + PDF Printer added + Smaller partitions/vhd + Autoupdate Srv. dis. + Standby disabled
----------------------------------------------------------------------------------
Changes since 07-2014 Ed:
-New system made from zero (not an update)
-Xentry: v9-10-11.2014
-DAS: v9-10-22.2014
-EPC: Datacard enabled
-Xentry: internal EPC/WIS linking removed
-new speed optimized file compression method used
-Vintage Mercedes-Benz Repair Info Library (unique)
-Mercedes-Benz Technical & Training Info library (unique)
-standard is a limted Version: only DAS/Xentry and only cars.
-...
only none-leechers will get the full version!
If you had previous version from me, you will get password for files only:
-if you wrote a review about the version you got.
-if you an active helping member in the forum, with many new posts/threads.
(a short comment, thanking or asking for someting is not enough)
else you are downgraded to leecher-status, even you have been donated before.
Donating is a sign to give that you are not a leecher, so please be act so. I dont sell here my effort , I give it only to the people who also help others! Else you will get only the limited slimmed base version.
Some videos (shown is 7-2014 but the 9-2014 is similar)
If you want this harddisk please contact me on pm!
I need help to fix the following:
1. Booting from USB 3.0 port of my PC works. File transfer speed ist USB 3.0, but the whole system is too slow, when I use a USB-Stick (not on HDD).
2. Enable to boot as efi.
3. Fix the ehci-sata boot problem.
IMPORTANT: Dont ask me for support on PM. Write your problem here! Password on pm. Dont forget to support by giving thank, a rep and rating! I have many posts, so you must tell me for which post you are asking the password for!
I share here my pm responce to a leecher, which applies also to all leechers: With the donated money I pay my internet costs (mostly for premium accounts) and for devoloping car-Hardware. Anything left from this money goes to a local gevornment-approved charity organisation. I have no car service and I earn no money from fixing cars like you and most others in the forum. Only for private use, for my own car and friend's cars. As it my hobby and not my job I do it for free of course.
Suggested 10€ is not that much money if you had not only you spent your countless time for it, but also alot of money to get it working. In this year alone I gave around 2500€ for car tools, which I really never need or musthave to buy as most people here in the forum, and again: I dont have car service or similar, so I can make money to finance it, as you can.
I love to share my experience with others, and hope to contiunue and improve this by financing a part of. By your support, I get motivated to make better work. And blieve me, you will profit from it way more than me.
I spent and will continue to spend my time and give my work with love for all people who also spent thier time for helping others. In the previous projects I begged everyone, who downloaded the SW to share their experience, to make it better. Anyone commented, gets the new edition. However, you was one of the leechers, who downloaded and even used it successfully, but never shared anything, even saying it worked. An unfair commercial project: Misuse other peoples effort to make money in your garage without helping back the people who made your profit possible. I spend weeks for it, but you have no 5 minutes from your precious time to write even a small comment. Meanwile you have the time for complaining I didnt give you the next edition.
In the forum you have only 3 posts, where you only asked others for help. So please be fair, and think again who is guy with a commercial project here.
If this edition is the same as DXEWS Edition, then please tell me for what did I spent my time in the past 5 weeks (sum of atleast 150h)? You can see the change list of DXVEWSSd14Sf08Da03 Edition and compare it with DXEWS, if you still think it are the same.
My english is not good, but I know how to write and spell disinfector, which is by the way not my nickname.
disinfetor
I've been using for years and I have the following question:
I am currently using Microcat Hyundai, CD version, June 2014 (updated to week 29), and I detected some part numbers (replacements/substitutions) do not appear in the program.
Here you are an example:
I know that the part number 54830-1G500 (Link Assy-Front Stabilizer, LH, 54-548 Stabilizer-Front) is the replacement/substitution of the "primary" part number 54830-1E100.
However in my Microcat (CD Version), if I do a query on the first reference (54830-1E100) informs me that there is no replacement/substitution.
For more detail, see the image below:
I have a friend who has the Microcat Live version, and he checked the same part number (54830-1E100), and with this version, the program says there is a replacement part number (54830-1G500).
For more detail, see the image below (sorry for the language, it is in spanish):
I have many more examples:
Part number "primary" -----------------------Replace/substitutionPart number
Hey there, i recently found some unknown unit in my w220. I have absolutely no clue what this might be
I had some water damage, so the stickers can't be read very good.
If I unplug this unit i'm unable to start the engine, the engine reacts like it's out of fuel...
DAS shows no error when it's unplugged. I have LPG in my car, but this unit is not the LPG controlling unit!
Maybe someone has an idea what this thing might be and whats its purpose? Thanks!
hello need help, !! I do not know how but I got a big problem on a BMW 330 E91 2008 !!
the car did not give the boot. and had a related failure to read the key fault: 4a63 ews manipulation.
I tried with PROGMAN make a new adaptation of the CAS, but what is certain is that after removing the key from the ignition the car never read the key and not even light a lamp !!!!!!!!
ie can not be diagnosed or turn the key !!!
can anyone help me, I'll be eternally grateful ...
please
Release Date : 09 2014
Version : 1.14.8.0
Developer : Infomedia Inc
Language : Multilingual
Description : Parts catalog Microcat LIVE Toyota includes all models (Toyota and Lexus) all markets, and has one of the best among all programs the interface and opportunities on installation and configuration program.
The shell program Microcat LIVE Toyota in all languages.
Data only in English, German, French, Spanish and Japanese.
There is a search and sort on VIN, on model and body type, as well as great opportunity to find the interchangeability of the part number and receive a list of part numbers for different models.
It takes time to upload and only 3 sec to press thanks and Rep +1 to show your appreciation.
That will give me more mental energy to upload more stuff for you all
Need help and advice for eco tuning 1.6 HDI 9HX. EGR off hysteresis maps. Particularly interested in the calculation of TI and SOI?
Who can help with advice - write. I really need help.
Thank you.
Hello,i have in my workshop an opel meriva b 2012 1.3cdti with bosch 0281018454 ecu,this ecu is totaly erased,because thunderstorm has erased it.
In ecu i can see sak 1767 infineon tricore,now i want reflash it with gallo2 or k-tag and i need full dump.
then i want adapt it to car,please suggest me hot to make ecu virgin and then marry it to the car,thanks.
Hi guys
I need to buy a programmer for ecu's , i have a mpps v13 but need to buy a other programmer , who is the best? Kes v2, bdm, galleto, or any other?
I have toyota Corolla 2004 with Navi AISIN 86113-60V140 who wont start up. There is message "please insert correct map disc".
Is there any solution for this fault?
I´m trying to change the milage in a MB Actros 1825 -99 with a 24C02 EEProm inside. The orginial milage is 726500,3 kilometer. The new milage should be about 756500,3 kilometer. This tripp shows the 100 meters (the number 3). The program I use cannot calculate so many numbers. So I end up with one number short and incorrect numbers.
The attached file is the original and it is on adress 0x00 00-03, 04-07, 08-0B the milage is.
Hallo I search for dump for dasboard Peugeot 206 with AUTOMATIC Transmision.
Dashboard is JAEGER 2001 year with Motorola hc05h12 inside.
The Peugeot is 206CC but I think that will happen from normal car also.
Thanks in advance.
![[Image: x-click-but04.gif]](https://www.paypalobjects.com/en_US/i/btn/x-click-but04.gif)
![[Image: TB8cBl.png]](http://imageshack.com/a/img908/2820/TB8cBl.png)
![[Image: 5e15fa41ae2fb54ddd05250d1f7f2bed.jpeg]](http://i63.fastpic.ru/big/2014/1030/ed/5e15fa41ae2fb54ddd05250d1f7f2bed.jpeg)
