hello, I need help on the following. I have some experience with airbags and dash but wanted to start removing EGR and DPF / FAP.
I need some tips on how to do it and what software to use.
this removal is always in the engine ecu?
memory is always the same which usually removes the immobilizer? ...
etc .. thanks

Hello!

I played around with vediamo and the ecu CRD2_NFZ ( cbf from DAS 07/2014 ).

I can't read the unrestricted bytes from ecu ( all values are zero ), and yes i have unlocked the ecu.

I can change values in the restricted 20 bytes and i can code the unrestricted bytes ( setting all options like the restricted ) but after pressing "SG Kodieren" i can see in the log that the values are written without errors ( no refused error ) but then the readed values are zero again ...

The ecu keeps the settings on the restricted 20 Bytes and if i read the settings with das ( normal scn view ) i can see my changes.

But i'm not sure if the ecu uses this values ...

DAS Developer says if i open the unrestricted section that at least one setting is invalid ... ( i suggest its getting the zero values too )

Thanks for your Help

us4r

door locks do not work. Turn signals flash appropriately when locking and unlocking with remote. Dealer diagnosed as bad PSE pump. No codes. Power supply ok.

I replaced PSE with a used unit. Got the locks to work one time and now inoperative again. closing assist functions properly.

Any ideas?

VIN: 1C8FYNB921T647364 Chrysler pt cruiser 2001

Hello!
I downloaded VAS PC 19.01.01 months ago. Today installed the basic disc and after all update data for seat (I'm trying it on a seat). Now I'm downloading the flash disc for seat. What other components do I need for updating ECU or DSG. Or any guide would helpful about this.

Hi , sorry for what could be an old subject. Could anyone give me a code for a sony cd132 cd6, M005905, 5s7t-18c15-cc.
Thanks and regards .

Hello all.Does anyone have Immo off files Vectra B 1.8 16v x18xe 96year.siemens simtec 56.5 - 5wk9 073 - 90 506 365 - s96007. the original file is deleted

Hello

I need find folder from a 2008 xentry version or any operative link for download 2008 xentry dvd image for extract the folder

I need the folder in f:\programe\sdflash\release\smart\#cff

I need check the files for try reflash one unit with one old software

thanks in advance

BR.

I've spent far too long trying to sort this now, hopefully someone can be of assistance.

I have tested so many immo off files now but getting nowhere with this ecu, my own files and other peoples "tested" files and one file have brought off of immo-off.com.

I'm desoldering the chip and reading from my programmer, is there a step im missing or are all of these files no good!?

thanks in advance
E

Hello im a new user from germany. I have xentry 1.2014 with a c4 sd connect but i ned a fdok key gen for x1 codes too learn new keys on the actros. I hope you can help me.

Hello. Can anyone help with DPF EGR off solution? I have one firmware file with removed DPF and EGR, but It has a some errors such as not working pilot injection and others. Thence it's harsh work of engine.
Please help!? Give me a working solution.

Mercedes 220CDI 2005 646.963 1037374192
In attachment my dpf egr off problematic file.

please can some one remove the immobiliser from toyota hiace
with 93c66 chip
thnakyou

Attached Files

toyota hiace.rar

72

108 bytes

Download

Chevrolet 1929 - 1954 Master Parts Catalog 834 pages

Dont forged to give thanx and reputation!!!

Attached Files

3.txt

36

101 bytes

Download

Hello. Can anyone help with DPF EGR off solution? I have one firmware file with removed DPF and EGR, but It has a some errors such as not working pilot injection and others. Thence it's harsh work of engine.
Please help!? Give me a working solution.

Mercedes 220CDI 2005 646.963 1037374192
In attachment my dpf egr off problematic file.
my dpf egr remove file

Hi to every one, i have a problem with the suspension of bmw x5 2006 4.8, give me the 74 (accumulator remains constant)code, but i dont found information about that, can some one help me, the vehicle is full down, i clear the code but dont work, not activate the compressor thanks in advance

hello

can somebody help me to make this ECU file virgin

its from Mercedes W210 diesel ingine from the year 2000
the eeprom is 5P08C3


Thanks in advance

Attached Files

ori mar.rar

30

500 bytes

Download

can someone help me for immo off dump for Chrysler voyager

Attached Files

immo box+ecu.rar

59

28.81 KB

Download

ECU95040.rar

58

242 bytes

Download

IMMOBOX_24LC02B.rar

44

215 bytes

Download

hello there,

i was wondering if anyone can help me immo off the ECU of Astra H 1.7 CDTI Bosch ecu 0 281 011 943?

Please help and advice.

thank you.

Hi m8,
can anyone share jeep Cherokee 2000 Service manual
Thks very much

Need original bin folder for 09.2014!!

pls help

Hi!! I have this Jaguar XF Restraint COntrol Module Model Num: CX23-14D374-AC. Can anyone recommend me a hardware and software to reset crash data for this model? I tried finding on ultraprog but did not seem to see this model in the list.

Is this the same as 9X23-14D374-AC?? Not sure why 9 became C.

Thanks in advance for advises!!

Hi all
I've replaced 2010 w221 headlight (facelift, xenon,led) and new 2010 SAM front for 2008 car.
The supplier give me SCN coding for SAM front:
P35=Led light
236=Day time running light
619=Cornering light.
This mean coding string or what is this ?
I have Vediamo 5.00.05 but my German is very very bad.
I should write coding string or Aktiv ?
Anyone please help me how to coding SAM front in this case.
The best way is Vediamo, as detail as possible.( this is the first time i use vediamo )
If you can, i'll give you Teamviewer.
Thank for any idea

Hy guys...can someone help me to adjust idle speed on stilo 1.9 jtd 2002 edc15c7?
Now its 850, i want it to 900 or 920...can someone do it for me?
Or tell me where is idle map or something?
Here is flash file....
Thank you on your help

edit. if someone can erase DTC p0235 and calculate checksum, that is even better
the car have that error when just ignition is on...if you erase it while car is running it will not be in memory until you leave accelerator pedal for 5 seconds....if you push the pedal just a little bit to increase revs no error.
I tried 2 map sensors, boost control valve and check wires from map to ecu...its all alright...did someone have that situation?

Attached Files

stilo1.rar

32

139.2 KB

Download

Anyone knows how to reset bmw srs airbag crash data using inpa?

Can someone help to calculate "PIN" code for Ford Fiesta stereo.

Serial: V179439

FDB200
03.05.2007

Thanks!

Looking for bmw wizard software to purchase or download
Anyone with experience and knowledge about this software please let me know

EWA SERVER NOT WORK

version 3/2014

Attached Files

Thumbnail(s)
   

Hi
How to turn off the signal by not wearing seat belts
It is very annoying
Thanks for the help

Good day friends of the forum.

I've been asked if a friend has used the Magneti Marelli Logic scanner?

Doing some research, it seemed one of the most comprehensive scanner that ever met, but it does not know the value, or sold outside the authorized network.

Seeing the video of it on youtube, surprised me by the amount of supported cars.

Someone in the forum use?

Thank you

carprog version 7.51 for all who want to try
works with cl*nes
pass only by pm and after the two magic buttons

Attached Files

Springtime.txt

562

65 bytes

Download