Hi all

I have 2012 renault safrane wont start the airbag is deployd

How i can make it start

Help me please

Hello, I heard these are being sold for some time already.

Anyone knows where I can buy, prices and what I need to do once I receive it?

Hi mates, can someone help me to find right combination with pin?
Is it S**R or i need to do any swapbytes? Here the dump from ECU
Peugeot 307 2,0 RFN IAW 4MP2.01

Attached Files

29F200b_RFN_IAW4mp201.rar

107

96.77 KB

Download

Super engineer Vediamo5 already proficient work, these are all I use Vediamo5 after many vehicle validation work, looking forward to find out more study work!
Function of the following is my current countless times after the vehicle work verified:

super engineer Vediamo5 connected to the SDconnect data converter is introduced.
super engineer Vediamo5 flashing on vehicle programming is introduced.
super engineer Vediamo5 coding was carried out on the vehicle code is introduced.
Vediamo5 super engineer to retrofit modified vehicle is introduced.
super engineer Vediamo5 instrument for vehicle region languages configuration to modify.
super engineer Vediamo5 free to increase or decrease of vehicle SA code is introduced.
super engineer Vediamo5 ME9.7 on vehicles set maximum speed limit on the computer.
Vediamo5 super engineer to 722.9 vehicle transmission computer program and a code.
super engineer Vediamo5 vehicles for W204 W212 W207 electric rearview mirror modified.
super engineer Vediamo5 of vehicle engine computer programming and code.

STEERING DEF002 TRW CLIO 24C16 8200937939B 54084783N

HI

I have problem with steering columm Renault Clio II
8200937939B TRW 54084783N 24cl16 eeprom.

I need virgine dump for this eeprom or repair it

Can you help me please ,

Best Regards Thierry

Attached Files

24C16_8200937939B_54084783N_planté.rar

105

1.15 KB

Download

Hallo!

Help me how to write digiprog 3 W203 ezs(box) with hc08
init failed sadsmile2
please help how to write, and good pin
Thank you all

Hello All
Please clear the crash data
Peugeot 508 eeprom 95640
thank you

Attached Files

96 779 106 80 w23 crash.rar

36

1.85 KB

Download

I am asking for instructions to setup BMW RHEINGOLD ista/p & ista/d network for the different cables i have K+dcan , Enet cable and my icom A2+b+c Cloned so i can talk to the BMW E60 & F30 ?

Can you help me i just installed these programs and need to now how to setup the network especially on Vmware side of things.

I try searching the forum for help.
I am trying to add new injectors to my 2008 E60, Its missing on cylinder 3 and i buy all the injectors to change them all out.
Hello Members

I have 2008 BMW E60 and zylinder # 3 is missing i check with inpa v5.01 it read out the error code and says its missing, then the injector flow rate is 1.78 different from all the other zylinders.

I have the MSD81.0 DME and then i select MSD80.0 N54 from the menu

Also when i try to read the Air bag Module it gives a dialog box saying something about software version of inpa and ECU error message too, i don't have any snapshot of that.
I try using Inpa 5.01 and Ediabas 6.4.7 to read out , thats is done ok,
<br><br>
<a href="http://s1227.photobucket.com/user/Yahwsha_Yhwh/media/Untitled2_zps313538bc.jpg.html" target="_blank"><img src="http://i1227.photobucket.com/albums/ee436/Yahwsha_Yhwh/Untitled2_zps313538bc.jpg" border="0" alt=" photo Untitled2_zps313538bc.jpg"/></a><br><br>
but when i try click "shift+F4 " for injector compensate its give me a error dialog box

<a href="http://s1227.photobucket.com/user/Yahwsha_Yhwh/media/Untitled1_zps3c1dbd3b.jpg.html" target="_blank"><img src="http://i1227.photobucket.com/albums/ee436/Yahwsha_Yhwh/Untitled1_zps3c1dbd3b.jpg" border="0" alt=" photo Untitled1_zps3c1dbd3b.jpg"/></a>

Any one can point me to the right Inpa/Ediabas version with all the correct .PRG , .GRP & .IPO files to work on the BMW E60?

every help is appreciated.

Hello Friends,
Please your help and things...

I bought Vediamo 05.00.03　with SDconnect.

Then...I works test for vediamo hand in PDF manual.
But can't intial connect for ECU, ME2.7 and SIM4LKE.

Thing "SD connect found OK" exsit the message.
However won't contact ECU with choosing cbf file.

Please see My youtube movie...
ttps://www.youtube.com/watch?v=XM7AkddgCLs
Please add "H" to URL head.

Vediamo return " TX error "

Also,I think " possibily only works real car ?? "
And testing real car W203.
But was same results...No good.

Please your help and things for this issue.
My procedure does not right?

Thank you for would your help

Hello,

can somebody share a good dump from Mazda bt50 airbag ecu.
UR81 57K30
KO 273

Thanks in advance.

I need renault megane RS 2.0 turbo 2012 "ori" file.
I have "mod" tune file and attached....166kw at the wheel.

In March 2014 Mercedes Benz DAS Xentry installation manual

Hello I need immo off
Megane 1.4 16V S110030048 B - 29F200

Hi, I am hoping you guys that have some experience with these pieces of kit can help me.
I am looking to buy either an autel DS708 clone or a used bosch kts with whatever the latest stable software is available on here.
I used the KTS a lot in the past and found it very very good and have also borrowed an Autel Maxi diag DS708. My problem is I don't know which to buy now as I like them both a lot. I work on a mix of cars and do prefer laptop based diagnostics for screen size and being able to keep the amount of equipment I have to carry around to a minimum. Please Help.

hello friends, I need a little help with the air conditioner peugeut 406 1.8 16v 2000, ac with automatic regulator, already replacing the relay but nothing, from what I see is not enough signal to activate the relay,'ve seen parameters, and has output at the command of the ac unit but then does not rush to relay. someone has an idea to help me. thanks and hugs

Hi, I am a bit of a newbie to this subject and hope someone here can help please. I have a 2009 VW transporter and need to program a spare key. I have a vcds to program it with but need the security code. Can anyone please advice what is needed ad how to go about getting the code.
Many thanks, Jon

if has any one info please contact me, i shall pay or ready to exchange anything, as u all reckon my database is already rich and buck thrower...))))))))

these euro 5 ones has an ext. scr unit which controls the adbluesystem, and can be deactivated via ecu flash, i dont want to designate who formerly were too know it all to do this but they could not do after i sent the file))) please come with real solutions, money is not important...

Hello friends.
would it be possible of finding to me a e220 mercedes radio code with chassis number: WDB2100041A016427
Thank you.

Hello, I need help sync ecu to cem Volvo v50 1.6 hdi , Thanks All

Attached Files

0l01Y_CEM_9S12DT256.rar

99

777 bytes

Download

95160_EDC16.rar

84

878 bytes

Download

ABS_ID.rar

90

86 bytes

Download

new link

Attached Files

manuales.volkswagen.txt

138

107 bytes

Download

Hi everyone,
Suddenly I lost all the images in ETKA. I get the "image does not exist!" message on all makes in all categories.

Anyone had a similar problem? I hadn't used it in a while and it "expired". I update with the Krosik updaters (price and regular) as I had before, but this time no images. I just did 1018 and 1019 for vw and au, no luck even though the 1018 update was huge...

I am running it in a win7 32bit VM on my 64bit win7 computer, it worked fine before. Is there a image viewer software it uses like adobe SVG viewer or something similar? I have SVG on there and reinstalled just in case, but no luck there either... It appears the .tif images are there, but it just can't find them? open them?

It's a little useless for some jobs right now when you have no clue as to what he part is called.

Seems to me there was a trick to get it working, like toggling something off then on again, but I can't remember what it was and I haven't been able to stumble across where I saw it before anywhere online now either...

Thanks

Dear Members of MHHauto:

I need your help and support, I bought a Chinese Xprog-m V5.3 with dongle, I follow all tutorials to update to 5.48 software, now I'm running Xprog 5.0 Desktop with software of 5.48 also update the firmware of the ATmega64 but even I can't read or write MCU Infineon XC2361A-56, Xprog show me the "device is not supported in this version".

Somebody please can help me to this work OK. I really appreciate it, I'm trying to clear a crash file airbag of Ford Fiesta 2013.

Thanks.

Attached Files

Thumbnail(s)
               

Can someone tell me how to DPF Off on Iveco Dialy 2007 65C.. ?

Or what I need to post here, to make dpf off dump for me ?

Hello, i have problem in instaling the fgtech v53. when open the program gives error (atached).

Does anyone can help?

thanks

Have a friend who like to read a SID206 in Ford 2.0 TDCI with MPPS (clone) - he took update on "V16" (?) - can see the car in list but can't make the choice for it, the ecu is "grey"
Can someone say me if he made already this ecu with MPPS none original?
I have many other tools for this ecu, so I can send him if not, but would be interesting if there is a version working on this clone.
By the way: it cable for V12 with no silver box - only obd2 cable

hello,

I've an 406 hdi 2.0 year 2001.

I've bought an second hand bsi because my bsi is faulty.

I extacted dump from the second hand bsi to virgin it.

1. I've put all the dump with "FFFF....." my dash became 999999km
2. I've put alle the dump with "0000...." bsi unknown on pp2000. But i can't telecode the bsi.
3. I've put "0000...." for PIN and VIN in the dump. BSI is reconized in pp2000. I can put VIN and telecode the option but when I put my PIN (the code written on the peugeot card). PP2000 said me the PIN is false.

What is the solution.
Can you virginize my dump.

Thx

Attached Files

bsi95040.rar

67

542 bytes

Download

Hi which programmer reads W77LE58 [QFP44] ?
Beeprog to expensive just to read this chip.

I find EasyPro 90B it has it in supported device but the software doesn't show the pin orientation :/. What about TOP2011 it has but dosn't specify what package this chip comes in 3 packages PLCC DIP and QFP and I need to read QFP type.

Need some advice

Tom

Edit: Which adapter would be suitable QFP44 to DIP40 or QFP44 to DIP44 ?

Short functions list:
Determination of chassis, model, engine, gearbox and complete set
Searching of all units and reading:
- identification data
- odometer value
- VIN and ADFG
- programming info (UIF)
- errors (DTC)
Reading and saving in files:
- program memory
- EEPROM
- coding data
- amount of DTCs and DTCs shadow-memory
- live data
- programming info (User Info Fields)
Copying ZCS (IKE - EWS) and FA (IKE - LCM) coding
... and other functions in various units

"Unlocked" functions to show possibilities of full version:
DTCs description in DME MS43.0, EWS3, SRS MRS4
Clearing DTCs in same units
EWS-DME synchronization code in DME MS43.0
Live data in DME MS43.0, EWS3, SRS MRS2 and MRS4
Status of all keys in EWS3
EWS3 coding data interpretation
Equipment correction in SRS MRS4


push here

VW Offboard Diagnostic Information System ODIS v1.2.0 + Postsetup + key
9GB
ISO
no pw

It can be operated in parallel to the VAS-PC under Windows XP on the same machine!

The diagnostic Button by VAS PC must be deleted because the systems only
should be clicked on the "OffboardDiagLauncher" button - otherwise, data crash!

It should not be trying to make both systems run simultaneously, since both use the same diagnostic port! possibly also data crash!

push here

key
push here

hello mates


i have stupid power supply to boot ecy ( 12@1amp ) , its chineese of course

what recommand power supply to boot ecu ?

thanks