hi
can xprog 5.48 clone read the motorola mcu 908 mask 1j35d ??????
can i have the diagrame to read it cause i cant readit on plc it always showing me a vcc probleme
best regards

Hi !
I have one W168 completed mess up !
car burn gas pump !
the mechanic change the Pump and the filter !
owner take the car and drive 5 kms , them car start stalking misfire etc !
Mechinic ask me to fix Maf of the ECU, the heater glass !
I put 2 new heater glass !
but car still got, same problem , wend we try to make run on the road, engine get fully mess up , can rev and gas pedal look like don"t work !
I clone another ECU but problem remain !

what can be the problem !
the only DTC I got is P0100 "Maf signal inplausive "

on idle MAF read 10kg/h
fuel pressure 2100mbar !

help please

Thank"s in advance

HI !
Does any one know how to test audi A3 2005 dashboard ?!
to test and fix on the bench ??!

thank"s in advance

BR

hi friends can some one help with pin code for nissan maxima a35 2010
bcm code is
50ff5
thank you

am having autoboss pc max ,i need the computer software to install in the computer so that i can use it for the diagnosis since i lost the softwar cd,
Thanks

EDIT BY MODERATOR mariusmilanezu

Thread MUVED >>>>>>>>
Take care where you post next time!!!!

hello forum
I am working on a 2010 crafter and have a warning on the dash that says adblue rest. the tank was low or empty so have filled up tank but cant remove warning.
I have used vagcom and autocom 2013.3 but no fault codes in any ecu for this or no reset function i can find.
Also 330 miles left on display until no start

any help would be appreciated

is anyone trying resolve ktag tokens problem?as I have done it many times on kess v2 and I found it easy but on ktag I am looking for way to plug in to main board to comunicate with it Appreciate for any help

Hi to all,
i have so many days of Trouble with my Crafter 2011
2.5 TDI CEBB 076906022N.

After i tried to Update ECU with sgo File, Ecu crashed at 8%.
I ordered the Same used ECU. My friend read it out and i Send File to immopincode.com
Car now Starts and Run but Immo light flashing in Dashboard.
Can anyone help me? Or can i broken the Light without any other complications.

Attached Files

Volkswagen__Crafter_(2E_2F)__2_5l_TDI_CR_80_kW__Bosch_EDC_17CP20-2_39_TriCore_1796_int__mem__(Full_ECU).rar

85

840.32 KB

Download

[IMMO OFF By immopincode.com] - Volkswagen__Crafter_(2E_2F)__2_5l_TDI_CR_80_kW__Bosch_EDC_17CP20-2_39_TriCore_1796_int__

66

840.37 KB

Download

Someone can help me with V_MAX Polo 1.6TDI 90HP?

Hi I need EGR OFF in Seat ibiza 1.9TDI BLT 130HP 038906019NJ 0281011823, I attached dump from ECU.

hello everyone
have toyota harrier with the automatic transimission when i put D and drive for some time the car jump it self to neutral,
Anyone with the idea please?

Please help radio code for navi alfa166 BECKER + SIMENS
This is pictures of the serial numbers.
Thanks

I have been working with different nissan car and am facing this problem and seem to be common problem to me,if anyone meet the problem like this tell me what to do.
Some Nissan after they removed the battery terminals, seem to lost memory in the immobilizer system and need to be reprogramed again since the security light come ON,when am going to program them am doing the following steps

1.Reading the BCM No,in order to obtain pin code
2.After obtaining pin code i plug machine like,T-300,T-Code,Autoboss in order to reprogram the key and immobilizer
3.I program the car with the given pin code and the security light turn OFF,and the car start fine then i turn off the car and remove the key and wait after few minutes,when i came to start the car was not starting again with same problem and security light stll came on

I tried to change Transponder,Antenna amplifier still same issue
Anyone with the Idea please?
This problem happen to
Nissan Navara 2006
Nissan Note 2006
Nissan Murano 2005
Nissan Navara 2009
Thanks

hello for all ...
i have ecu airbag unit 95910 3K000 Sonata crash with eep 95640
can help me to clear it ..

regards..

I'm working on an E90 from 2006 which has the FRM1 module.
I've replaced it with an used FRM3 module.
I used winkfp to change the vin. That went successfully and in Inpa I see the vin om my car with the date when it was changed.

When using ncsexpert it show me FRM2 and during coding it shows FRM3
See attached files.

I only changed the fa of NFRM to #0909
I also get some error codes on the FRM3 module when using ista-d. One of them:
009CD3 FRM: software version and code index do not match

When using winkfp I've selected FRM3 and just flashed it.

-Is it correct that the fa in cas is kept original? (#0X06)
I've kept the fa of the FRM1 original. (#0X06)

Hi. Can someone tell me how, or unlock for me SAAB Clarion PU-2147 ?

Can someone clear this file...
trafic autoliv 608361600e
THANKS

SRS 77960-ta2-r011-m4

MCU SPC560P50

Data flash readed

Attached Files

data.rar

40

3.78 KB

Download

good evening everybody,

I have a problem with my car , i can't run at full capacity! max 4000 rpm.
with xentry , i have error code : " P0600-004 : CAN OF KI "

do you know this error?

thank you for your help

Hi All
I once downloaded a vmware image that was about 10gb from memory.
I am having serious issues trying to find another copy, can somebody point me in direction please or supply a link.

VMWARE BMW DIS v57.
I would be most grateful.

Anyone has workshop manual for kobelco sk30sr,or for sk200-6...
I am fixing these two excavator now...
I need the manual to solve my problem...
thanks a lot....

Hello to all.

I have only one key for my car and recently i bought one used from ebay and send it to a company to virginize key. Today i received the key and i make the teach in process into my car. All went ok and know the key can start the car with no problem but the remote lock/unlock it doesn't working. Is something else that i must do?

Hi every one, i have problem to exceed the limit of gaoline injected in this car, my limit is 70mm3.

in my map mod i see smooke limiter at 80° and i change it up to 100mg that like 85mm3, but i can't exceed for the moment are there other limiter ?

thanks a lot

Hello!
I asked for the activation of GlobalTIS please.

RequestID: R416990344 Request Date: 27.4.14
Software Key:
2F44-BB22-1440-FE30-DB2A-2FBE-8117-DA72-
8468-DF6F-C668-3DC2-DC97-9889-85DA-6093

Thank You

Robert

This is Diesel Engine 07-E3B Workshop manual....
This engine is part of kubota excavator....

Attached Files

link.txt

55

42 bytes

Download

Please help clear crash data.
25lc320
1358991080
thx

Hello, I used to use Carsoft for my Exx models for error code reading. For the FXX model i only have E-Sys. Can that be used for error code reading or is there anything available yet?
thanks.

Hello, I looking for an eeprom dash dump for my civic 2009 93c76. I screwed the original program

Thanks for your help,

ELSAWin Update_5.0 Torrent

Attached Files

ELSAWin Update_5.0.rar

503

15.7 KB

Download

Help me with pin code for this Nissan murano 2005
BCM no 1F995