Hello,
I want to install DAS/Xentry in a new laptop. I have followed JC's video guide and do the partitioning etc. Put the systema date 1 month after release and then I install the ultilities (that I have found here) installed tempstar, and run the DAS keygen (saved ok). Then I go to the DAS DVD (01/2011) folder stardiag and run "setup". At this time I got the error "You dont have authorizization to run this update on this system" and setup exits.
Most guides I found here assume that I already have something installed. How I do a brand new installation?
heloo everybody. For 2 years i want an automatic transmission for my zafira 2007, because shifting syxs and my clutch is already dieing. I found a whole 1.9cdti zafira buil in the same year with automatic transmission very cheap (crushed). In first second and third look the transmissions look similer in the side of connecting to the engine, the same borders and wholes for screws. All the other part for the automat are on the other car ready to be moved on my vehicle. But if i switch them and the gearbox, will the car run? Is there a big connection with the computer because of which the car will not go? The 1.9 is cheap but i dont know if I buy it will be possible to do this crazy thing. (because in opel centers do not sell z16xep with automatik transmission, i asked them about all this, but they told me that there is nowhere information about exactly this). please people tell me everything you know, or even where to ask.
Reply
Hello all, i want to ask how to format a 120GB hdd? i installed the old way C:10, D:6, E:12, F:30 with 2 users OWNER and STAR, i downloaded the das installation guide and i run unnatended after that i went to install xentry but the installation gives me 4 errors:
1.Cannot create Errorlog-File http://goo.gl/PS8HX
after that
2.Error -6003 (i just ignored this one)
then
3.Driver repair not successful http://goo.gl/98OgE
and the last one
4.No valid authorization was found for xentry http://goo.gl/xKmll
and even if I continue the setup, after the final reboot the xentry will not work so if someone has a bit of time to explain how to install das in order to install xentry without errors i will be thankful. Have a wonderful day, and thanks for your time and efforts.
Bosch ESI tronic 2011.1 is a program to work with blocks of diagnostics firm BOSCH, bodywork and extensive catalog of all production of firm Robert Bosch GmbH. Information about auto parts, labor hours, adjusting the data pump. Bosch ESItronic program supports all languages including Russian, has a nice interface that allows you to search by part number Bosch or any other manufacturer, gives information on the application of specific parts by make and model. The bulk of the information presented on the machines since 1971, but something that is and on earlier models.
Bosch ESItronic program is a valuable tool for those who are engaged in repair and spare parts for machines, includes complete information on the air, electrical and fuel systems in Europe, and also partially American and Japanese cars..
DAS (Diagnose Assistance System) and appropriate Developer Kit key.
WARNING! Be very careful when using the Developer functions! Many of them can cause irreversible damage to the components of the vehicle and may cause personal injury! Please be aware that modification to some specific systems (airbags, braking systems) may make the vehicle unsafe for on road use and may violate the local highway laws, rendering the car not roadworthy in the legal aspect.
This is especially true for the SRS modules, where unintentional usage of developer options may cause deployment of airbags/tensioners and other aggressive restraint systems. Most of the development menus were designed to be used at the factories in the Germany, therefore they are usually not translated into English (or your local DAS language). Basic understanding of German terminology is required to use the extended functions; in doubt, please keep a dictionary (or electronic translator) handy.
DISCLAIMER: The author of this manual takes no responsibility for any damage caused by use of the Developer Kit of DAS. This option is a very powerful tool but must be used responsibly and with extreme caution. If in doubt, please do not blindly try the menu options – several of them will cause EEPROM or FLASH memory damage, requiring the module to be disassembled and reprogrammed using external tools - this is a troublesome and risky operation. Unintentional actuation of components may cause mechanical failures or even risk of fire - please remember, that in Developer Mode DAS will do exactly what you command, all safety checks and interlocks are bypassed!
1. What is a Developer Kit ?
Developer kit is an extension to the Diagnose Assistance System of Mercedes-Benz vehicles. This extension allows in-depth manipulation of the configuration, data and programs stored inside the electronic control units of Mercedes vehicles. This extension is normally used at the factory in order to facilitate development and testing of on-board electronic systems. The extension is normally shipped with every DAS system, however it remains locked until a valid Developer key is entered into the configuration via the licensing menu of Star Utilities.
2. What is the benefit of using it?
As a presumed DAS user you have probably learned already that there are number of functions that would logically belong to the software options, but they are missing from the regular DAS installations. These include recoding (variant coding) the control units without SCNs (Software Calibration Numbers), de/activation of commercially sensitive options (in-motion video of tv/dvd), recoding the configuration of airbag units, seat belt reminders, changing the configuration of instrument clusters, restoring damaged EEPROM contents for Comand/APS and other ECUs and many more. There is also an additional benefit: sometimes control units record a DTCs (error codes) that are filtered out by the production software. Developer kit allows unfiltered view on the module's error memory, therefore allowing to see all stored trouble codes, including the masked ones.
The reasons for disabling these functions in the DAS setups seen at the dealership are very simple: firstly, risk associated with using them is too high to open these tools to (very often) under trained and rushing technicians; secondly, there are several legal obligations that put restrictions on what the dealer can do and what he can not - for instance, recoding tv-in-motion, airbags and emission-re lated systems fall into this category. Thirdly, electronically damaged components very often result in replacement, therefore repairing (recoding) would have adverse effect on spare parts revenue.
3. How to get started
Firstly, you need the mentioned Developer key made according to your LAN ID. Before scrapping your old key, take note of the LAN ID (there are some cases when it changes ie. when reconfiguring the hardware) and the current License Key in the DAS. Both information can be found in the licensing menu of Star Utilities. Then replace your current key with Developer key, save and restart DAS. After selection of vehicle class there should be now a new screen (in German, except V-Series and W221 where it comes in English) informing you about dangers associated with using Developer Kit. You are good to go now.
4. Basic usage
Looking at the basic screen of vehicle selection you might notice the first changes - there are new vehicle series available, including production prototypes or models not yet commercially available. Important note: if you are working on a production vehicle and there are two choices of the car in the menu ("normal" and "prototype") never try to talk to the car using Prototype data, as this will most probably cause damage to the electronic units. Usually prototypes are removed from the software a few months after the commercial launch.
After selecting the vehicle series, proceed to defining the model, steering, transmission, engine and so on. It is best however to match the vehicle using VIN. This will of course require a recent version of the software to cover models produced up to date.
Next proceed to the specific control unit you want to work on. Almost every ECU now has an additional menu option called something like:
- Development Data or
- Diagnosis to Plant Specifications or
- Diagnosis/Coding according to Factory Specifications
…or similar.
Content of this menu usually varies from one unit to another, but generally they are divided into following submenus:
- Control Unit Version
Allows raw dump of the ECU identification, including HW and SW release and so on.
- Actuation's
Apart from actuating the components connected to the outputs of the control unit (lights, motors, actuators, solenoids, relays pumps and so on) this menu usually contains number of software routines that are executed using this menu, ie. resetting the ECU, enabling test mode and so on.
CAREFUL: Airbag modules have the option of actuating the airbag firing outputs directly from this menu. PROCEED WITH EXTREME CAUTION, DO NOT LET ANYONE SIT IN THE VEHICLE WHEN WORKING ON THE AIRBAG SYSTEM. Relevant menu options: look for Crashstufe Ansteuern, Zundkreis (ZK, ZK-Stufe) Ansteuern..
This also applies to actuating other components – keep in mind that some pumps for example are not intended to be permanently switched on and they will overheat quickly. Some actuators might be in a invalid mechanical configuration and they will also get damaged when trying to move them using Developer menus. Please keep in mind that in the Developer Mode there are no safety interlocks. In these cases actuations should be performed only with relevant component disconnected to check for presence of switched supply voltage.
A good example of benefit of using the Developer Actuation menu is Rear SAM of the W211 and W219 series: retractable headrests (RHR) can not be actuated using the standard module actuation menu, however, in the Development section there is an option of actuating each of three headrest release motors (or vacuum valves in case of Station Wagon).
For instrument clusters there is a broad choice of extended testing options, which allow checking the displays, lamps, needle instruments and so on. Each module has a varying number of menu choices so please take your time and explore them in the DAS Simulation mode - do not expect them to work as expected in DasSIM - usually simulation is limited to simplest cases only, it is enough however, to get acquainted with the menu content). Please also note, that in the Developer menu this section will also contain executable entry points for various procedures and routines stored in the control units: these will usually manipulate the data stored in units’ EEPROM, so be careful with these. Among many different options there is also usually an actuation called Module Reset (Steuergerat resetten, SG_Reset or similar) that will reboot the electronic control unit.
Important note: when carrying out a module adaptation via the standard DAS menus, the program automatically takes care of ECU reset, when required. This is not the case when using the Developer mode – after performing a configuration change to the module, do not expect it
to be in effect right away – carry out a SG_Reset first! In cases where no option for induced unit reset is available, cycling the ignition switch might force the module to reload its settings and coding.
- Actual values
Very similar to the regular section of DAS menu, however the choice of values is usually much broader. Some of the presented values might come out as hexadecimal numbers, so conversion might be necessary
- Adaptations
This is where the power of Developer Kit really shows. I assume that you are already familiar with basic variant coding of Mercedes control units. In the Developer section, you can do the same with the following extensions:
- SCN-dependent modules can be recoded without need for a valid Software Calibration Number (scn code)
- Airbag modules may be freely reconfigured to match car's equipment (addition/removal of rear side-bags for instance)
- Several models of SRS controllers will allow erasing of the CRASH DATA after deployment of restraint systems
- COMAND and other head units supporting video playback may be reconfigured to allow playback in motion
- Custom, complex configurations can be built for the entertainment modules connected via D2B and MOST optical rings
- Engine control modules may be recoded to match the engine installed in the vehicle (ie. after a mechanical swap)
- Speed limiters may be removed from engine ECU
- Instrument clusters may be recoded to match different engine, model, version and so on.
- When adding vehicle trim from different version (ie. Elegance or Avantgarde components installed into a Classic-level vehicle trim) they may be activated so ie. Additional lamps or other equipment is functioning properly.
- Front fog lights can be activated to function as a cornering aid in vehicles W203, W171, W211 and newer. This coding is available in the module Front SAM (SAM-V). Please note that in the early W211 models the right SAM (Passenger SAM) also needs to be recoded. I have found a number of units that were having the cornering light in the Driver SAM but the appropriate option was missing from the right SAM. In this situation, only the left cornering lamp will function – to overcome this, a right SAM would need to be replaced (rather na inexpensive from the second-hand market) Please note that for RHD vehicles the SAM functions are reversed (left vs. right, Passenger vs. Driver).
- Rear brake lights can be actitvated to function as adaptive lights, ie. They will pulse quickly when emergency braking is detected. Function supported in the rear SAMs as of approx. 06/2005.
- Hazard lights can be configured to switch on automatically with emergency braking.
Both above options are available in the module Rear SAM (SAM-F). Same as above.
- And many, many more.
After performing module adaptation always perform the module reset (see the note under “Actuations”).
5. Real examples of using developer
Please note, that availability of the specific range of the Developer functions is highly dependent
on the installed version of the ECU in question. For instance, recoding the Engine Control Unit might require upgrading its flashware to a more modern release first. Keep in mind that not all ECUs are update-able – some of them might need a newer hardware to update the sw version.
Uprating the speed limited in a gasoline (ME-series controller) engine control unit
Log on to DAS, connect to the car, select:
Control Units -> Drive -> ME-SFI 28 -> Development Data.
Then select the Control Unit Adaptations -> Explizite Kodierung
This option works quite the same in Diesel engine models, however i found it more difficult to use (quite frequently modules are replying with an error message to the attempt of recoding). I was able to successfully remove the speed limiter on a CDI2 series module from the W210 model and some others as well.
Adding rear airbags to the AB control module
Control Units -> Body -> Airbag (AB) -> Development Data -> Control Module Adaptations -> Variant Coding -> Fahrzeugausstatung Kodieren
(the last menu entry can be slightly d ifferent in various module variants)
Select the drop-down list in the field Airbag Hinten Rechts and Airbag Hinten Links – set to YES. Back up to the main Airbag menu, reset the fault codes, cycle ignition, reset fault codes again and cycle the ignition for 2nd time (this step is very important).
Adding fog lamps to function as a cornering aid
Select Body, then Driver Side SAM -> Development Data -> Control Unit Adaptations -> Variant Coding -> Abbiegelicht set to ON (“ja”).
Then go to the Passenger SAM (if present, for example in 211/219 model series) and similarly, perform the same coding in the second SAM unit. I have found that quite often cars manufactured prior to year 2003 have the relevant cornering lights option available in the left sam, however right sam is missing it. Not a big problem since these are readily and cheaply available from the second-hand market.
For all the onboard systems to recognize the new function you will also need to recode the CGW or EZS and mark the appropriate factory option in the adaptations.
Hidden error codes For W211/W219/W230 series with SBC system, go to the Chassis-> Sensotronic Brake Control (SBC) then enter Development Data then call up Fault Codes. Most likely, a car that has been driven for some time will have a code “Event: ABS Bremsung” stored. This Fault/Event is not normally shown in the general menu of DAS – it is being filtered. It actually does not represent an actual error, just a specific condition (hard braking with ABS activation). You will find many modules that actually filter out some more or less useful fault codes.
This menu is also very useful when evaluating vague fault codes (ie: “Hydraulics fault” in the general version in the developer menu can be drilled down to something more meaningful like “rear left release valve stuck in closed state” – this will come in German though).
Adapting the SRS control unit to a new car (different configuration, different VIN).
First of all erase all present error codes in the unit if possible. If there are current faults the airbag module might not get properly reinitialized.
Then proceed to the menu control unit adaptations -> special functions -> Control Unit is released.
From this point do not turn the ignition off or reset the control module. Proceed to the menu option “initial startup” where the current configuration will be reinitialized and new VIN can be written to the control unit.
Please pay attention to the specified configuration (ie. Does the car have rear side airbags?) otherwise you will end up with a controller that does not recognize airbags installed in the vehicle.
After completing the initial startup, reset the control module (cycle ignition) and erase all fault codes resulting from the startup process.
Ford USA MCAT 2011 spare parts catalog, presented original spare parts and accessories Ford USA market, all models cars, light trucks Ford, VIN decoding.
Ford North America Application Features:
• Dealer Management System integration - enables order transfer, SOH and Customer search display
• Positive VIN identification - identifies the correct vehicle and interprets the correct part
• Easy to use Graphic Index - hyperlinked illustrations of major sections of vehicle to find the part fast
• Color vehicle images - color images of vehicle lines makes catalog selection easy
• Superior Search Features
• Service Part Number
• Basic Part Number
• Description
• Group
• Motorcraft
• Illustration number
• Calibration number
• Identification number
• Parts list
• Cross catalog
• Built in Ford Video Clips - view Ford information from the video button on the tool bar on illustrations enable the user to select the required part in one click of the mouse
• Pop up descriptions on illustrations - view part description by just placing mouse pointer over callout
• Save and recall parts orders - quotations can be saved and retrieved later for ordering
• OSI Search
• Save VIN Feature
• Alpha Index
• Fast loading illustrations
• Short cut keys - enabling users to find parts quicker
• Exceptional operating speed - increases dealership efficiency
• User notes - adds user notes to parts or sections
• Manufacturer notes - displays additional information added by the VM
• Parts pricing - view the latest parts pricing with easy install updates
• Superior print facility - enabling users to print and fax quotes and images at the click of a mouse
• Image zooming - enables users to set the illustrations to their preferred size
It is a electronic part catalogue for Land Rover vehicles from 1986 to 2011.
There is a search by chassis number also. The information about the vehicle by chassis number gives country where the vehicle is sold, colour, equipment, etc.
Language: English, Deutsch, Magyar, Italiano, Francais, Espanol, Nederlands, Dansk, Norsk, Svenska, Portugues, Polski, Suomi, Turkce, Russian, etc.
Operating System: Windows XP 32bit, Windows Vista 32bit (x86), Windows 7 32bit (x86)
YEAR: 2011
Medicine: YES
Hi there i need to find out if it is possible to take a coded me control unit from car A and place it in car B ,and code it to car B using developer mode?
In DAS my Ml270cdi w163 reports that my fuel tank has a capacity of 38 litres when in fact its is 83 litres and thus fuel gauge does not read correctly and I wondered if anyone had any ideas as how to set the correct value, or if you know a man that can
Hi, did any of you succeeded in installation and usage of DiagBox on Windows Vista / Windows 7 family? I only managed to complete installation, it is the same as on XP, but the DiagBox does not work. The main window opens but it has some problems with accessing data required to open the make selection pane. It only offers "measures" pane and general menu to configure diagbox,
So far the only working way to use DiagBox on Vista/7 family is using a VM Ware Player with XP.
Hello all,
I have a china clone of Vag Com 10.6.0, it works great.
Now my problem is I want to update to VCDS 10.6.3,
Does anyone have the software and the dump of a VCDS Vag 10.6.3 china cable ?
Please help me with this,
Thank you,
I hope someone can help me, I have Das 07/2010 installed and i am trying to update to 2011 version but it keeps telling me "Regular update peirod ended20100930" or something to that affect, can anyone help me around this? Ive set my date correctly and Wis updated ok. Please help someone
PS i have heard you can use the setup.inx file from an older version, is this correct?
Hello,
I recently downloaded the Citroen Service Backup Documentation software and would appreciate some help setting it up. I was told I need to mount it to a virtual drive. I have also read the guide, but I'm still not sure. Any help would be much appreciated.
Requesting if anyone comes across it, it was released on March 23rd. I'm looking for the full DVDs images, not just the extracted files from the jetarch archives.
heloo everybody. For 2 years i want an automatic transmission for my zafira 2007, because shifting syxs and my clutch is already dieing. I found a whole 1.9cdti zafira buil in the same year with automatic transmission very cheap (crushed). In first second and third look the transmissions look similer in the side of connecting to the engine, the same borders and wholes for screws. All the other part for the automat are on the other car ready to be moved on my vehicle. But if i switch them and the gearbox, will the car run? Is there a big connection with the computer because of which the car will not go? The 1.9 is cheap but i dont know if I buy it will be possible to do this crazy thing. (because in opel centers do not sell z16xep with automatik transmission, i asked them about all this, but they told me that there is nowhere information about exactly this). please people tell me everything you know, or even where to ask.
so if someone has a bit of time to explain how to install das in order to install xentry without errors i will be thankful. Have a wonderful day, and thanks for your time and efforts.
![[Image: 1301933379_0anfzzl9ei1sv3o.jpeg]](http://redox.com.ua/uploads/posts/2011-04/1301933379_0anfzzl9ei1sv3o.jpeg)
![[Image: 44201171939pm.png]](http://img832.imageshack.us/i/44201171939pm.png/)
