I have one challenge,
Opel Zafira 1.9 CDTI 120HP Z19DT 2006 with cold start issues.
New starter, camshaft sensor, battery.
Injectors, HP pump, HP regulator.
New glow plugs, glow plug relay.
Soft mod for EGR and DPF off.
EGR with blanking plate.
EDC16C9
Bosch : 1037377267 / 0281012549
Opel Software Number: 5519892
MPPS v22 clone used for read.
The car is mine and after many attempts to find the root cause I started to investigate also potential software issues.
On >10° no issues.
On <10° cranking is long (6-7 sec) and after ignition with a lot of white smoke with unburned fuel.
Literally 1° leads to significant difference in the cranking behaviour.
On <10° with unplugged coolant temp sensor the cranking is OK.
Is there such thing as cold start map that could interfere with the cold start?
I have a problem with Citroen C5 with 2.0hdi and Delphi dcm3.5 ECU. I can't make configuration on this ECU (I want to make cruise control work again).
Car starts normally without any problems.
I virginized and matched the ECU to bsi few times and still can't make any changes. It doesn't see configuration even transmission types and other (they're just blank).
ECU was good virginized (on live data it was marked as after sales status and there's wasn't any problems with synchronization, matching to BSI)
And when It's matched - it's unlocked and no problems with synchronization to bsi - on live data so that's ok.
Have you any ideas how to make any changes in configuration? I don't know maybe flash is bad
And I don't have lexia, I used cheap autel ds808.
And I saw somebody had opened the ECU before me.
Have Upraded 3.0 Engine with other Turbocharger ( before BV50 and now GTB2260Vk).
Someone has expirience with good Tune for this Setup?
Actuator is from BV50 , works perfect no DTC .
Also egr , dpf and flaps off needed.
Someone can help?
Dont fr free...
Hello everyone,
Recently, I got a Launch Creader Elite 2.0 for Mercedes and Volkswagen. I need help to find out if there is a solution to add other car brands like Mitsubishi and Renault for free.
Is there a hack method or a way to flash the tablet?
i readed eeprom of johnson control cluster via programmer but i think the eeprom corrupted bcause when i sold the eeprom on cluster and turn on the cluster on bench the display shows eeprom conflict erprom version 00 needed version 19
can anyone check the file if its okay or not and if its not what can i do to slove this.
Hello, i am looking for some help to repair some modules PSG16 with certain errors like P1632, P1634, P0604...That cannot dissaper even after replacing transistor or reprogramming with sps!
Does someone know if those errors are repairable or not?
For example i have one module that looks brand new but it has P1632 and P0606 and the car does not start!
P1630,P1631=repairable
P0335,P0340-reparable
P1634=reparable
P0149-repairable only if the valve is damaged,if in the ecu not repairable
Hello,
I search for Damos File for Ecu Siemens SDI4 'Porsche Cayenne S 957 V8 385Cv 2007);
I put the original map.
HW: 022906032ME
SW: WS2C60328SEAA02
Many Thanks
Hey i have downloaded ista install files and tried to install but i have error i been struggeling with that many days can someone help me thru teamviewer i am willing to pay
The ZDOBD EPS001 Bluetooth Heavy Duty Truck Scanner can easily reset and regenerate your DPF on Cummins engines to keep them humming. Instead of shelling out a fortune at the shop for a forced regeneration, this heavy duty truck scanner can save you thousands a year! Keep your engine in the best state and extend your truck's lifespan.
Truck Diagnostics: With the ZDOBD EPS001 Bluetooth Heavy Duty Truck Scanner, you can read and clear fault codes. From engines to EBS, and beyond, you can tackle repairs like a pro. Supporting the latest ISO 27145 and classic protocols like SAE J1939, SAE J1708, SAE 27145, it's compatible with Class 4-8 trucks. Compact and user-friendly, this diesel diagnostic tool is here to save you time and frustration!
ZDOBD EPS001 Features:
1. DPF Regeneration: DPF code clearing / Reset
2. Support CUMMINS, VOLVO, SCANNIA, FREIGHTLINER
3. Supported Languages: Chinese, English, Russian
4. Bluetooth Connectivity:
The ZDOBD EPS001 Bluetooth Heavy Duty Truck Scanner connects via Bluetooth in just few seconds. No more tangled cables—just download the app, register, and you're good to go!
5. Real Plug-and-Play Scanner:
One-click automatic recognition to enter the system, avoid menu selection manually. Different from traditional diagnosis. The ZDOBD EPS001 is a plug-and-play scanner which features menu-less quick access system. It is portable and user-friendly—perfect for any household.
6. Download ZDOBD App on Google Play or App Store (Search "ZDOBD")
ZDOBD EPS001 Heavy Duty Truck Scanner Functions:
Engine Inspection:
ECU data version information view
Fault code viewing and clearing
Real-time engine data viewing
DPF system regeneration, SCR system drive
SCR test:
One-click self-recognition into the system
Supports running on Android 6.0 or above
Supports running on IOS11 or above
Dashlight data and analysis
Read the code to clear the vehicle for repair
Read the real-time data stream of vehicle operation
Diagnostic device packing: ultrasonic integrated welding process, attractive and durable
Vehicle Function:
Engine Control, SCR Control, Vehicle Control, EBS, Transmission Control, Instrument Control, Driver Door Control, Air Suspension
ZDOBD Compatible Truck Models:
$99 To Get One ZDOBD EPS001 Heavy Duty Truck Scanner >>>
For more details, feel free to leave your comments or send us a message.