Hello guys, I need any help.
I have this car -> Infiniti i30 1997
This have after system get 90º, the RPM was oscillating at below 500rpm and I need accelerate to motor don't die and turn off.
- I already clean the Air sensor with (CRC Mass Air Flow);
- I already fix 02 oxygen sensor (lambda);
- I don't fix the 06 spark plugs yet.
I pass the AUTOCOM CDP+ scanner and his show this FAULT attached.
Anybody can help me to resolve? Its dangerous drive this car, many times at curve, the motor turn off.
Diagnostic program used by dealers for Peugeot and Citroen vehicles. It only works with the original Chinese and adapters XS Evolution Lexia3.
You can do all as an authorized dealer. This diagnostics software allows you to perform a complete analysis of all models from 1995 to present. Diagnosis is made through the OBD II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
- O.S.: Windows XP; Windows Vista; Windows 7; Windows 8
- CPU: Pentium/Athlon 1.8 GHz or higher
- RAM: 256 MB of system memory
- Hard Drive: 10 GB of available space
- DVD-ROM
Requirements:
- O.S.: Windows XP; Windows Vista; Windows 7; Windows 8
- CPU: Pentium/Athlon 1.8 GHz or higher
- RAM: 256 MB of system memory
- Hard Drive: 10 GB of available space
- DVD-ROM
Nissan Old Cars Parts Catalogs 1960-1980 PDF [Jap]
Win | 2.89 GB
Collection of hand assembled catalogs in models NISSAN/DATSUN 1960-1980 years, are collected only model RHD.
Homepage -
Code:
http://www.nissan-global.com
Requirements:
- O.S.: Windows XP; Windows Vista; Windows 7; Windows 8
- CPU: Pentium/Athlon 1 GHz or higher
- RAM: 256 MB of system memory
- Hard Drive: 5 GB of available space
- DVD-ROM
Requirements:
- O.S.: Windows XP; Windows Vista; Windows 7
- CPU: Pentium/Athlon 1 GHz or higher
- RAM: 256 MB of system memory
- Hard Drive: 1 GB of available space
- CD-ROM
Mitchell OnDemand Vintage - Set 1 + Set 2 (7 CDs) English
Win | 3.44 GB
The first and second series in 7 discs of known manufacturer of software and documentation for car containing several thousand pages of PDF documents and dedicated to the "old" cars and trucks, manufactured and shipping in the United States from 1960 to 1982.
Homepage -
Code:
http://www.mitchell1.com
Requirements:
- O.S.: Windows XP; Windows Vista; Windows 7
- CPU: Pentium/Athlon 1 GHz or higher
- RAM: 256 MB of system memory
- Hard Drive: 5 GB of available space
- CD-ROM
Ford ECAT software contains a catalog of parts for all models of Ford cars, jeeps, light commercial, produced for the European market.
- O.S.: Windows XP; Windows Vista; Windows 7; Windows 8
- CPU: Pentium/Athlon 1.8 GHz or higher
- RAM: 256 MB of system memory
- Hard Drive: 8 GB of available space
- DVD-ROM
Microcat Kia [06.2014] Multilanguage
Win | 6.27 GB
It contains all the information on spare parts and accessories of KIA vehicles in all markets. It can also be useful as manual assembly / disassembly. Comes in several languages: English, Spanish, French, German, etc.
Homepage -
Code:
http://www.microcat.ifmsystems.com
Requirements:
- O.S.: Windows XP; Windows Vista; Windows 7; Windows 8
- CPU: Pentium/Athlon 1.8 GHz or higher
- RAM: 256 MB of system memory
- Hard Drive: 10 GB of available space
- DVD-ROM
This is the official manual used in interactive workshops to mark the house where you can see almost all parts of the car with their references and drawings included in parts.
- O.S.: Windows XP; Windows Vista; Windows 7; Windows 8
- CPU: Pentium/Athlon 1.8 GHz or higher
- RAM: 256 MB of system memory
- Hard Drive: 5 GB of available space
- DVD-ROM
Hello my friends. I have a Mercedes 212 model with turbo charger issues. I have the following fault code: P226300 The boost pressure deviates from the specific vacuum. All vacuum are fine and the turbo tubes instead of inflate they pull in. Can anyone please give me few hints? Thank you
Hi mates, today i received a Zed bull V508 from china, i try to read some transponder and work, but when i connect the interface to PC by USB appear a message that device is not recognized, well i change cable USB and same message, after some plays with two USB cables and two differents PCs now i not have message alert, and USB function not work...
Well i open my interface and i can see very low quality ( i already expect it) and can see a jumper between pin 31 and 29 from FTDI 232BM (Pin 29 is GND, and PIN 31 is TEST pin) i not like remove it and try because i don't know if this join is to have free token or other function by "engineers" Chineses.
Any can help me with this?
Thanks
P.D. In device list not appear a new device when i plug the zed bull usb cable, then i can't try to install manually drivers
Can anyone share me a image of Porsche PST2 V24 (windows 3.11)
specialy the WINAPP Partition , because i have a Harddisk crash and now some broken files
some one have any information how to use
and if Infineon XC236x FLASH Programmer this programmer support calculator?????
or clear crash damp for this srs module ???
or only read and write eeprom
seler dont have any info only 2 photo from editor
hello i have ford escort and it has EEC-IV and i see in IUDv3.2 and says there to remove TMS chip inside and conect pin 4 and pin 13 together. can this way make immo off ?
I tried to found solution by myself, reading all topics that was releated to that error, after 2 days no solution :-(. I got that problem only when connection w204&w212 all others are good, any help please i used NewGuide2i solution
hello everyone i m in trouble please help me out to slove this problem and
C1525: Rotation angle sensor initialization undone and steering is too jam please help me out if someone repair manual so please share with me
Hi guys about 3 weeks ago I have seen thread on this forum and nyo4 2014 for xp and for win7 was attached i can't find it at all probably was deleted by moderator... is not allowed to talk about this nyo or what?
![[Image: psa_diagbox_1.png]](http://infodocs.org/web_images/psa_diagbox_1.png)
![[Image: eng-des.png]](http://infodocs.org/images/eng-des.png)
![[Image: eng-req.png]](http://infodocs.org/images/eng-req.png)
![[Image: ford_logo.jpg]](http://myimages.onl/images/2014/11/07/ford_logo.jpg){kind=logo}
![[Image: nissan_old_car_parts_catalogs.jpg]](http://myimages.onl/images/2015/03/18/nissan_old_car_parts_catalogs.jpg)
![[Image: saab_logo.jpg]](http://myimages.onl/images/2015/03/23/saab_logo.jpg){kind=logo}
![[Image: mitchell_ondemand_vintage_1.png]](http://myimages.onl/images/2015/03/14/mitchell_ondemand_vintage_1.png)
![[Image: ford_logo.jpg]](http://infodocs.org/web_images/ford_logo.jpg){kind=logo}
![[Image: microcat_kia_1.jpg]](http://myimages.onl/images/2015/01/23/microcat_kia_1.jpg)
![[Image: microcat_land_rover_1.jpg]](http://infodocs.org/web_images/microcat_land_rover_1.jpg)
i used NewGuide2i solution
