I have reinstalled Service Ranger 5 times on my laptop, and when i enter the unlock key it says its invalid.
I know my installer & keygen is good because i can install and activate the program on other pc's or laptops...but just not on my Lenovo. I am using windows 7.
Is someone able to help...its as if the PC ID number is corrupt???

I have also used an advanced uninstaller to remove the program before trying reinstalls....but to no avail.
Any help would be apreciated,

Hello, I need all in electric scheme for the Merscedes Benz
2010 E-Class 220CDI W212
Is there anyone who can tell me vilken softwere is
good to the consumption.

The data being installed is not supported by the software that is currently installed. Please update your sis software before installing this library


Installation tips, do not know what the problem is, I installed the RERR0010

Attached Files

Thumbnail(s)
   

Hallo..
I need dpf off please
Peugeot 307 1.6 hdi 110hp 2004
Type ECU EDC16C3
Hardware 0281011234
Software 1037370639

I read with bdm

Attached Files

307 dpf-off am39bl802c bdm.rar

125

172.75 KB

Download

Hi everybody

-> my interface is Vag118 (see pic 1.1 and pic1.2)




-> I have probleme with it after unwitting updating via VCDS Rosstech
firmware.

-> By searching on the internet I found the procedure to reprogram
ATmega162 and FT232BL (see pdf file)

Tutorial Repair Vag PDF

-> flashing of ATmega162 as went very well as security bits ( i have
programmed it with Firmware11.2.0)

firmware_184_flash_and_eeprom.bin

-> The cable has this ID : VID_0403&PID_6001, I modified the two files
(ftdibus.inf and ftdiport.inf ) with this values (see pic 2.1)



->But when i connect the cable with pc and installing the drivers (CDM
2.06.00 WHQL Certified) the cable appear like this (USB SERIAL PORT)
not HEX ROSSTECH. (see pic 2.2)



-> I have tried to flash FT232BL with file (FTDI232_eeprom.ept) and
Mcprog but no way an error appears when I click (program) (see pic 3.1 and pic3.2)





-> I tried to use (vidpidfix.exe) to fix VID and PID but when I execute it this error appears (see pic 4.1) and when I click on (Ok) it open

and I do like in the previous tutorial but same error appears again when I click (open) (see pic 4.2)


-> Some info :
* Any VCDS version is never installed in the PC
* On the other PC I installed vcds 10.6 and 11.2 but no one detect interface cable
* I tried to flash FT232B when the 3 components are removed and when they are on place but same
probleme

Please what I have to do ??

Hello, has anyone a working solution for post-cat lambda removal for MED9.1? With readyness set ok?

rgds

Hello Masters


YV1LS56D9Y2646128

V01610X0291204H

Thanks

Hello, i want to change in my BMW E90 2008 engine (2.0D) on EDC17 was damaged, now i ve got 3.0D with EDC16 its any possibility to run this?

hello friend need help from you, and installed and patched Delphi 1-2013, the program starts but after about 10 seconds turns itself does not give me time to enter and see the activation helps. no license

Attached Files

Thumbnail(s)
   

I need serial for this program please thanks

4Dealership.Karplus.v2009.2.2.12

Attached Files

4dealership.txt

45

52 bytes

Download

My tech2 orginal gm memorycard 32mb orginal version 137.00 tıs 2000 sps no problem rs232 no problem
(global tıs v32B sps ERROR)
E5301:unable to communicate with the server (servername)
IMPORTANT: do not replace the control module immediately!
first ensure the programming device (e.g.MDI) is updated
with the latest software version and is properly connected
to the service pc then re attempt the programming procedure
the failure persists contact technical support for assistance

vw touran 1.9tdi(90hp) 120hp
Opel astra 1.7 cdti(100hp) 120hp
Bmw 525d e60(163hp) 190hp

pass pm

hi,

i need some lesson for ECU reading and write files,also will tell me what program i use Galletto 2 or some another.If anyone want help me post me PM here or Alti_man -Skype
I will buy some beers
Thank u

Sry for bad English...

attached is file 1k0 909 605 E vw8r could somebody clear the crash data thanx

New guy here. I hope Im doing this right. Mods please let me know if Im doing it wrong. Figure I'd share what I've got as is the spirit of this forum.

Komatsu s6d114e-1 motor

1.txt

100

75 bytes

Download

hi all member . please you help reset brake pad bmw x5 2007 . thank

Hello i have problem with my a klasse w168 all keys are blocked on the DAS i have read the mcu of the DAS system 0D69J Motorola mcu with XPROG-usb...

Can some body make unlock the keys for me !!!!
And Is my Dump correct!!!!!


THANKS In Advance
Best RGS
UMKA

Attached Files

das.rar

79

237 bytes

Download

like everything in life there is a first time, I found the memory is a RH68 (93c86), e read with the x-dev, however I need to know is if they have an original file, because it has been corrupted.

appreciate a help, this is my first job in repairing a motorcycle, my cars are really strong.

BIKE IS CBR 954RR
KEIHIN
38770-MCJ-D01
9704-100072
ED

I read a lot about honda HISS system, and found many Information CONTACT, the issue is that the zed-dev does not perform honda 954RR.
I'm from Argentina, Buenos Aires and not much information to work, for this reason I ask, to learn not to bother.

Thanks and sorry for the inconvenience

hello

Today I tried to edit the file in OCTAVIA II BXE 2008 ecu number - 03G906021TG ; 391891. Unfortunately without success, what's more - I locked the ecu (IMMO). I was able to bring the controller to the factory, and now ask- has anyone modified (tuned) file?
thank you very much

below the original file readed MPPS via OBD

03G906021TB 391891.rar

181

56.36 KB

Download

Hi!!!
Maybe somebody has checked file for 018 906 019 BF? I would more power

hi all I am looking for any software that could help me with all aspects of old fords from the 50s-80s

hi guys,,need some help,,file for peugeot 206 1.4hdi st 95160 bosch edc16c3
need imm off 0 281 010 707,,,if you can help please

Please can any body help. I recently purchased a good clone IDS and from spending all day trying to get ford working I now move to jag / Land rover and I believe the best version is V130 full + licence patch, but I cannot find any torrent links.

Please anybody?

Hallo,
Please clear crash data
Kia Sorento 2008
95910-3E060, Eeprom 95160

Hi, I can share the Isuzu IDSS updated to 9.2012 by Google Drive. If you want this software send me a PM with an gmail acount.

Click on thanks link.

Bye.

Is it posseble to erase a used transponder ? ( ID48 Immo 3 )

I have on the bench al Immo 3 ECU, Immo 3 tacho + 1 Immo 3 transponder, but all not frome the same car..

With this used transponder i can not match the cluster to the ecu / transponder to ecu.

Thanks in advanced.

hello friends here I am looking for a 1.5dci deferance between injectors on a 65 hp engine and other injectors on moteure meme 80hp and where is the deferance

Hi

I want Hyundai or Kia GDS for Korean Market

Need Manuals workshop for
Hyundai Sonata N20 GLP 2006-
Kia Lotze GLP 2006-2009

Any have Hyundai GDS, Kia GDS for korean Market.

Thanks