After installing the Galletto 2 software, i worked with the interface yesterday with no problems.
I tried installing on other computer and it gave me this error:
VISUAL C++ error
Runtime error:
Program ......./EOBD2.exe
abnormal program termination.
Bad news is that it´s giving the same error on the other PC that was working.
Any ideas?
Hello Guys,
Does anyone in here have a picture of the inside of the module.
I need to know which direction is pin 1, Rookies mistake.
EEprom 25320
Thanks in Advance.
The BSI has someone, I need information which is a resistor between the EPROM with the fourth leg and the CPU.
I have a pdf of the enigma that I sent here but it can not read the values.
My resistor was eliminated when you try soldering souvenirs.
Attached Files
hello, can please someone send an original file for MB W163 year 1999, 160 kW. the software number is 261206053, MB part of the ecu is A0255458632. there is eprom 29f200psop (262 kB). thank you a lot, the memory is broken.
hi guys i have finally decided to ask for help i have tried everything and i dont know what to do... im having problems setting up wireless connection with sd connect... ive done it at least 5 times with other laptops on the same software version but now i am stuck... i get lan connection working 100% but when i try wireless it connects to the road24h and everything looks alright just that padlock stays there with the red cross over it... and whats weird too if i set my unit to number 02 for example it will stay like that as long as it is lan connection when i pull out the ethernet cable to switch to wireless it goes to 07 and gets a red cross... so i tried to register my unit as number 07 but still the same... i have applied all fixes i could find on the site and nothing helped... its a chinese clone with a chinese hdd... but ive tried other hdds aswell no luck... plz can someone help me its kind of urgent (actually i need it tomorrow lol) and my boss is gonna kill me lol...
thx for any help
and just to add i have tried 2 more sd connects still the same... so i dont think the muxes are faulty they are new...
Password to install updates "scary01".
The patch does not need anything, everything is done.
Inside hand:
DiagBox V7.02 Already patched.iso - iso-image with software
Update folder with updates.
Setup Drivers DiagBox - driver.
PSA Interface Checker Install - program to change the firmware interface XS Evolution.
Psa_Dam_Org_Build_Code - calculator of DAM by release date auto and vice versa.
TLCDfix - utility to disable the query code when telekodirovanii
Installation Instructions DiagBox v.7.xx - promptly inserted a new instruction.
UPDATE added updates 7.06-7.07, fixed installation guide new update, read all! Spoiler and manual.
I have one set immobox, ecu and key from toyota aygo and does not work
The car with problem of the immo is a toyota aygo 1000cc manual 2005 model
It works for a while and then the engine stops
ECU:BOSCH 89661-0H022 TOYOTA
IMMOBOX:89780-0H020
I think the problem is the sync
The help i need is a new file for ecu,immo,and key
hi friends here is a problem with golf 4 tdi 110cv seeing key remains clignyoter on TB. and after I make a diag with vag com jai defects key points Retro low jai even change another ring still the same problem help me please
i have installed xentry/das 07.2011 without any problems. i use a new sd-connect. all ip´s are set and mux is reacheble over lan and wlan. but when i connect to car and start diagnosis comes error (1.1)-1.501.9551 power of sd mux is wrong check sd toolkit. but there all is ok.
can anyone help???
I was wondering if anyone can send me a dump that has a DPF remove modification.I wanted to remove DPF on my car,because it has started to make problems.
![[Image: 291fihy.jpg]](http://i33.tinypic.com/291fihy.jpg)
![[Image: 2rxijxh.jpg]](http://i45.tinypic.com/2rxijxh.jpg)
![[Image: 2qi8o6c.jpg]](http://i47.tinypic.com/2qi8o6c.jpg)
![[Image: wisz.jpg]](http://img843.imageshack.us/img843/5449/wisz.jpg)
