I have already searched on the internet, but i did not find any helpful information.
So I would like to know what are the basic differences between the Caterpillar Communication Adapter 3 (317-7485) and the older version: Caterpillar Communication Adapter 2 (275-5121)?
And do someone know, if there is any other adapter which I can use on the Caterpillar Machines? And are they better, or not?
Hello to all members, well heres my story, i was using ver 7-10 of das w/xentry and saw the latest release of 5-11 and tried to do an upgrade, but failed miserably, then wsc (another member) helped me and all seemed well but at the end of the install it gives me a error that mentions "Error while writing version information" and even though i hit yes multiple times, it gives another error and then kicks me out of the install.
All components are installed but xentry isnt there....
if anyone would please give me some pointers on this i would greatly appreciate it, ive already been dealing with this for a couple of days while just staring at my laptop screen.
Hello, I have a problem with Xentry 03-2011, when I restart the computer or close and reopen the program, the passkey is reset in xentry starkey manager.
I am forced to re-enter to start the program. The DAS is working properly.
I applied the patch cal.ini, cal.sli and fix the time of 5/5/2011, and the patch 0311.exe.
I have another problem, I can not understand why compact4 (by China) have to connect it first and then open Xentry correct way to work, this is not always the case.
Thanks
My goal is to be able to back up the contents of my J-45080 32MB PC Card with Saab ver 144 software to a .bin file.
I would also like to write updated or different car .bin files back to the PC card.
I have the following...
Desktop computer using Windows 7 64-bit. (sorry no laptop)
Setup a Windows Virtual PC with Windows XP SP3
Purchased this PCMCIA adapter. http://www.amtron.com/reader/pcdrp101cs.htm
Memory Card Explorer Version 3-21
Windows 7 properly installed the PCMCIA adapter as a...
Ricoh R/RL/RT/RC/5C475(II), R5C520 or Compatible CardBus Controller.
When I insert the J-45080 Card
Windows 7 installs the card under Other Devices as a...
MR032FLF14PCG_32MB_FLASH_CARD_SERIES_SV+
Device Status shows...
The drivers for this device are not installed. (Code 28)
When I open the MCE in windows 7, I cannot get past the error...
Please exit MCE and try a different memory window address
I tried different addresses in the command line but could not get it to work.
I then tried the Windows XP Virtual Machine.
I was able to get the application to open by using address WD0000
Now I am getting an error Failed to auto identify the CARD type. Make sure the CARD write protect switch is off.
I looked at the card but I do not see a write protect switch. Should I?
If I changed the auto detect card type to manual the error goes away.
MCE shows Slot 1, No Card.
If I look at the card slot on the computer the 3.3v light is lit.
If I perform any operation like info, read, checksum etc. MCE crashes.
When I open the VCC Power Levels settings the program shows...
Always use Vcc = 5.0V
If I try to change to the default setting Apply Vcc as indicated by PC-Card or Always use Vcc = 3.3V then I get an error...
Slot initialise failure, settings lost. Couldn't allocate memory window, CARDBUS slot?
The setting does not save.
i installed citroen and peugeot docbackup and sedre.
Files from here.
Installed with manual from other thread.
Docbackup works fine.
Sedre works not.
( the Symbol in taskbar flashing at startup sedre from desktopicon , after any time the symbol in taskbar stopped flashing and the tooltip shows that i can start sedre with click at symbol ) , if i click at symbol nothing works
at docbackup this works without problems. if clicking the red colored not flashing symbol in taskbar it opens internetexplorer and shows startpage of docbackup.
please help me with sedre ,, sedre is for me very high priority , docbackup low priority ,
help me please forum mate!
Anyone who can help.
i need a mercedes sprinter dashboard dump, if a factory can be a virgin. anything else can only be a good 93c66 different versions would be needed. dasboard yare 10/2001 vdo
my friends, thank you in advance. Sorry if it is difficult to understand what I write, but this googletranslate.
i am having a big problem, hope you can help me out on this one as i have seen you are the best there is on this great forum.
I installed Das version 03-04 2010 0n my ibm t30, wis and then activated xentry as per the installation guide.
installation was ok but when i connect it to a vehicle i get the hardware error fault(1.1)-1.501.9909.
i already tested my cables and multiplexer on another t30 and worked 100% ok
Com port settings are all as per instruction but still error.and i also uninstalled the lpt and com port and re installed and tested but still no connection.
can somebody pls explain what the
developer tool allows you to do extra in ptt
im guessing code virgin ecu's offline
is it needed to set speed limit.?
is there a developer tool for 1.11 ?
does anyone use ptt for mack and not volvo like me,
not much on the site mack related,
is this a european site ??
This bilingual (German/English) CD offers an in-depth description of gasoline direct injection, and is suitable for students, trainers as well as certified technicians who want to further their understanding of this new system. It is fully narrated and offers numerous animated illustrations, as well as videos, print and search functions and a glossary. You will recognize the same quality and attention to detail you have become accustomed to from the Bosch Handbook and Instructional Booklets.
Minimum System Requirements:
Intel Pentium II 200 MHz or higher
64 MB RAM
100 MB available hard drive memory
16 bit sound card
16-speed CD-ROM drive
SVGA (800x600 pixels; 16 bit color depth)
Microsoft Windows 95/98 or NT 4.0 SP5/Windows 2000
Windows Media Player 6.4 Bosch Gasoline Direct Injection CD
Wholesale Case Quantity: 1
BSIN: H900
ISBN: 0-8376-0616-0 (ISBN-10)
ISBN: 978-0-8376-0616-3 (ISBN-13)
Link download:
Year / Date of Release: 2011
Version: 05-2011
System Requirements: Windows XP
Language: Multilingual (Russian present)
Medicine: Present
Description: The dealer car diagnostics Renault, Dacia, Samsung. Works with its own interface.
Ext. Information: For directions srack for the first installation and the second for further work in hand.
Downloads folder
Copy DAS32R2 exe Programme,DAS bin folder
Copy Cobra folder Programme folder
open DblDlm folder
Double click StartDLMDAS.bat DAS run2011.03
Double click StartDLMDAS-sim.bat DAs SIM run
Send shortcut to deskopt
DAS-DASsim ico DAS bIN folder
Hello guy's
I have a problem with my new mixed installation DAS 10.2008 WIS 10.2008 Xentry 09.2009.All is ok all works good just in Xentry are a lots of missing photos eg: Mercedes Cars/SLC197;Vans/no photos no names;Trucks/SFTP Heavy Duty,SFTP Light Duty;Busses/no photos but still are names;Unimog/nothing all ; Setra Busses/no photos but still are names ; Fuso/missing photos for Canter TD E5 and Super Great.
I not need the trucks and industrial machines photos but for passengers cars and for Vans I need especially as Vans there is nothing there to chose so cannot use this section of Xentry.
I try to copy the photos from other version installation and to paste in specific location but not work at all.
Please someone give me a hand help for this problem cause I feel my head will explode and monday morning I have the chance to test on a Sprinter all my work.
Please help me
I need your help. I have bought on internet a Merceded Comand NTG 2.5 (GPS with HDD) and i want to install it on MB B-class (W245).
When i install it on my car, and i have started the unit, the unit auto protection are activated. So, i can't use the unit.
How can i bypass this protection?
I have tried to contact the seller, but no answer.
I'am in France Paris, so any advice, help are welcome.
I am new here. I am looking for a tool or tools for MB cars. What tools do I need? Some research myself leads me to Compact3 and compact 4. Are they good? Which one should I get?
First to say, this is borrowed/stolen/copy-pasted, whatever you want to call it, from Mr. tkinyan. Not sure if it's copyrighted Try it and report. Good Luck
During the first time you see the APPID 252 Error at the installation. Please don't press continued at this time. Looking the c:\document and settings\star\local settings\Temp\ and search the commonlic.dll and replace it with the commonlic.dll with attached one. You can continued the DAS installation now.
![[Image: cv_h900.jpg]](http://assets1.bentleypublishers.com/images/covers/cv_h900.jpg)
![[Image: scv_h900.jpg]](http://assets1.bentleypublishers.com/images/covers/scv_h900.jpg)
Bosch Gasoline Direct Injection CD
and monday morning I have the chance to test on a Sprinter all my work.
Not sure if it's copyrighted 
Good Luck