Hi,
i have problem with front fog lights, car is also equipped with cornering lights, and both don`t wok
when i switch on fog lights they blink slowly 5 maybe 6 times and stay off, fuses ok,
no errors, hog lights seems to be managed by HCM (module replaced, nothing changes)
and it looks like it gets info about light switch status via CAN, but i didn`t noticed any problems with communication, 
and i am out of ideas
any idea can be helpful,
thanks in advance!

[SOLVED]
It seems that car had front bumper replaced with fog lamps, someone installed H16 19W bulbs, hcm module needs H8 35W bulbs to work properly, 19W bulb had current draw high enough to avoid “open circuit “ error but small enough that module noticed difference and cut off power

Anyone have virgin  file for fk72-19h440-CA?

CG100X added VW MQB R7F7014xx 5D Cluster mileage correction function in the newest software V1.6.4.0. (It cannot decode IMMO data).
CG100X D1 Adapter is required to work with CG100X.




CG100X V1.6.4.0 Update on Nov. 25th, 2024:

1. Added 20 models to dashboard.
   
2. Added 16 models to airbag.
   
3. Added 4 models to read-write.
   

Hi
i need adblue off car hyundai tucson with dcu17CP43 module car dont have massage conter,i have only DTC p010E
Tanks

Attached Files

dcu17CP43.rar

6

478.57 KB

Download

Hello, I need help adjusting the kilometers.
This display has around 90000 and I want it to be 45000.
I read eprom 93c56.
I pay for the service if necessary.
Thanks

Attached Files

SUPERTENERE1200_94000.zip

6

342 bytes

Download

Hi,is ther any ine whoi can cat and evap off , not only dtc ,monitoring too. jeep grandcherokee 2006 3.7 . only tested , $$ no problem.

Attached Files

flash ngc3.rar

3

350.11 KB

Download

hi to all...........

please can someone help me with pinout (CONNECTEUR 20 PIN) To power on this dashboard in bench mode


and how i can read this type of MCU ,?

Hello.

Is it still possible to remove CP due those closing accounts everywhere?
or maybe here someone have access to it?

audi 2017+ AC CP remove

Hello, little question I have Autoliv 610 79 61 00 Renault need clear crash code. I have carprog full licence. Possible to read it ? Need to desolder eeprom each time? 

Regards

Hi,
need ori:
Mazda 2.2 D 150 KM
SW: G89XSH3FT5TA
Denso ECU

Hi everyone, at the moment im looking to tune my ECU, i cant manage to find any damos, a2l, map pack for my Alfa Romeo Brera 3.2 JTS using bosch MED 7.6.2

Is anybody here providing a service that can make a map pack for me? not expecting work for free ofcourse, i know looking for maps in winols is not easy and time consuming...

as many parameters as possible especially VVT would be great.

SW#:382541
HW#:0261S01050

Hello dear friends!

Please can someone help , extract ISN from ECU ?




Resolved



Thank you Silvestras1337

Hi,
Does anyone have a wiring diagram for a Suzuki Celerio 2015 ? 
I'm looking for the light switch and headlights.

Hi all, so I pulled the file off the original. Attempted to adjust mileage but now on the dash the ODO is blank. I tried writing the original file back on but it is still blank and a couple gauges don't work but everything else does. I have another file here that should read 127000 kms, but shows up on dash as 205030. Anyone able to piece me together a working file? Or have a file I could try as i'm assuming mine is possibly corrupt.

Attached Files

2019 Regius Hiace.rar

2

970 bytes

Download

hi, i need please for ista+ 4.49.41


Streamdataprimitive_DEDE.sqlite

Xmlvalueprimitive_DEDE.sqlite


THANK YOU

please immo off psa mev17.4 bosch ecu peugeot 207sw 2008

Attached Files

peugeot 207.rar

3

3.4 KB

Download

Hello,
Can somebody please advise me how and what is the procedure for install a brand new ECM on General region 2018 Mitsubishi Eclipse Cross? The original ECM from car is not readable anymore to save the info/coding etc. Thanks

Hi    i need some help on vmax removal.
My 907 is max 80KMH 5 tons year 2024

I read some threads here and this what i did so far with monaco8.16

unlock securty EZS
unlock security cpc and set vmax to 180
in cpc i can see that the coding for this car MPM907 (also checked in xentru that there is no MPM)
also has no PSM 
does have cruise control with limiter but cannot find the module or coding for this (does anybody know where to check?)
I also read on this thread : Thereis also an identifier in the ESP907 module (20 0D -  VehFixMaxSpd_V2) that controls the Vmax as well, part of the cruise control. That identifier might need to be written/coded manually, sort of like on the W906 platform with 03 36 (CR6/60) and C1 05/C1 06 (CR43).

I cannot find this in monaco in esp907 or do not know how to change this coding.

Car is still at 80 kmh.   when i go in xentry to adaptations there is a menu for special bodies:
Here is also a speed limiter active.  i can change this in xentry to 255KMH and now my car goes 90KMH

Does anybody know how to solve this?

Thanks

Is there an option on Winols 2.24 to freeze frame so when i delete dtcs the program doesnt remember them and turn the codes back on

Hi Guys,
I am trying to program Suzuki Swift and wondering if someone can help me get the 4-digit PIN to reprogram the system. I am in a hurry, and I would appreciate any help.

this is what I got when I read the Immo ID by T-code pro:  7F 21 12 00 and by launch: ID code: 6dc0 62b2 d2a3 a5ec 5124

please PM 
Thanks in advance

Anyone have DiagBox_setup_V09.146_POI installer and willing to upload ??
With kind regards
Joran

need a original file for ACDELCO E87

HW: 55584317
SW: 55588355
VIN nr.: W0LPD6EXXC1043785
SW ver.: G12051
Spare:
Engine: A17DTF
HW Ver.: 86AA6PH013020122
SW upg.: 55595002

PLEASE HELP

Hi all member please tell me  company sell battery pack Land Rover hybrid 2016 !thank

Good day all,
Got read for E83 - is immo off possible?
Thanks

Attached Files

chev e83 full read.rar

12

791.62 KB

Download

I recently did an immo delete on an edc15vm(00 Jetta TDI) and when its put in the car it's throwing an EEPROM error code P1640, he mentioned this was the second ECU to give that error but I want to be sure I did the immo delete correctly.

Here is stock eeprom pulled from ecu and immo off

Attached Files

Edc15vm Immo test.rar

2

601 bytes

Download

Could anyone share me MED40 and ME97 unlocked CBF ? 
Thank you and very appreciated in advance.

Hi, mates! I got AUDI A4 2012 with Magneti Marelli Dash with dashes instead of mileage. Looks like the previous owner was trying to correct the milage through the exhaust pipe or something went wrong... so what i do have: the mileage in instrument cluster reads like 655350km, i can't to correct it by the scanner or with the software. Just have read the dump (it's attached).
 If someone can help me to correct it with 70000 miles that would be very good, or maybe just tell me how to decrypt it. I found the last 3 digits of vin with XOR and nothing else. 

Thanks,

Alex.

Attached Files

8K0 920 950 H_95320.zip

2

1.01 KB

Download

DSP3+ Odometer Correction Tool Full Version includes full odometer, 98% coverage rate for digital odometer, airbag modules, car radios,car immobilizers.



DSP3+ Odometer Correction Tool Highlights:

1.Full touch screen

I Am looking for someone that can do Lambda OFF for Fiat panda Magneti Marelli IAW 5SF8

HW: IAW5SFHW409

This workshop manual provides service information for the Kubota KX057-4 and U55-4 excavators.It contains sections on general information, mechanisms, and servicing. The general section includes safety, specifications, and maintenance information. The mechanisms section describeshow systems function. The servicing section provides troubleshooting, maintenance procedures,and repair instructions. The manual is intended to help service personnel maintain and repairthe excavators.

Attached Files

Kubota_KX057-4_U55_Workshop_Manual_Excavator_RY911-20510-25001.txt

23

174 bytes

Download