I have a problem with converting the Jaguar X760 2020 from the USA to the EU. I've changed parameters in CCF files "RrDIDrvMech" to "Driven via BCM" not as stop light and "Speedo main units" to kmh from mph, with CCF Tools 4.9.
The changed file was uploaded to the car using Pathfinder, but I cannot update software in BCM and IPC, because it says it's up-to-date and there's some central configuration errors.
I've tried to change the wiring, but the LED version of the backlight with DI and stop signal are on the same wire as in the scheme attached.
Could someone tell me how to enforce BCM and PC software to update according to the new CCF, or am I doing something wrong?
Looking for dpf off on nissan quasqui edc17c41 have tried a few solutions but keep getting limp mode p1453 dpf pressure sensor.
HW: 1074R
SW: 1037539172
VIN nr.:
SW ver.: BB59C
Spare:
Engine:
HW Ver.:
SW upg.: BB59E
hello, I tried to swap bsi with same hw and sw
EL3 CEM00
HW D6
sw 6.05
9830790580-00
after writing eeprom 95128 from ori do donor unit, car does not start, I transferred also configuration with autel, and treid to adapt keys but it refuses.
Can someone virgin eeprom so I can try it that way?
Hi I have problem with this Errors in 2 cars DTC24AE1A + DTC200292 in Renault Master 3 2022r I tried everything , DPF cleaned and coded , changed for new original sonde 227932151R , changed for new original 227701177R driver and this errors come back always again after 1000 km in 2 cars always this 2 codes together [b]DTC24AE1A + DTC200292. [/b] Any Idea Please ?
Hi guys, I need tprot password of the attached file.
Someone wrote the ecu with a fulflash from another ecu, and it can't be written again.
I got the original files (attached); maybe the correct password can make you able to write again with Pcmflash. Thanks for your help
ANCEL DS700 is a OBD2 Automotive Scanner Key Programming Tool upgraded of ANCEL DS600 supports 40+Reset Service Bi-Directional Test ECU Coding with fully updated software and ultra extensive vehicle coverage design PK THINKTOOL PAD10.
ANCEL DS700 Highlights:
1. Bi-directional Control & Active Test: Perform these functions to analyze whether the components in the electronic control system can work normally and improve vehicle performance or stimulate high-end features for the car.
2. Full system diagnostics, whole vehicle scan: Compared with ordinary four-system scanners, ANCEL DS700 supports all system diagnostics for a full scan of the car's available control modules. Car safety will make your travel safer and easier.
3. 34 Special Functions: In addition to full system diagnostics, this car scanner is also a maintenance reset tool. Using this diagnostic tool with 34 hot used special functions will save you a lot of time and high maintenance cost. It is definitely a lucky star for car owners.
4. Automatically Check: Adopts smart detection mode, after the vehicle is connected, the system will automatically recognize the vehicle information, automatically check the vehicle, and automatically generates a report, no human intervention is needed throughout the process.
5. Quickly print diagnostic reports (Two ways): 1. Transfer the diagnostic report to the computer via USB to print it. 2. Use ANCEL dedicated printer to print directly. Note: Need to purchase a separate printer.
6. Efficient Remote Diagnosis: Instant support available from our technical team by TeamViewer remote control when you encounter any technical or operational problems, saving your time and effort of communicating back and forth by email and improving the efficiency of problem-solving.
7. Fast and responsive: Equipped with the enhanced Android 10.0 operating system and 4 GB RAM, 6000mAh/7.6v powerful battery and 64 GB internal storage, allows customers to enjoy a fast and technological experience.
8. Customer Management: It lets you manage information of all customers. Helps you organize all customer information that is associated with the vehicle test records, which is a great support for the management of daily workshop business.
9. Support 6 optional modules: Work light, video scope, moduledock, thermal imager, battery tester, scope box.(Note: you need to buy tools extra)
10. 10 OBD2 Test Modes: Read/clear codes, view freeze frame data, I/M readiness monitor, live data stream, O2 sensor test data, on-board monitoring, EVAP test, VIN information, DTC lookup
ANCEL DS700 Diagnostic Tool Support List:
Supports 10000+ car models from America, Europe, Asia (Including Russian car models, Brazilian car models, Chinese car models, Australian car models, Indian car models, Malaysian car models, Latin American car models and other national car models)
$953.99 To Get One ANCEL DS700 All System OBD2 Diagnostic Tool>>>
For more details, feel free to leave your comments or send us a message.
I am having trouble using dla+ wireless with new freightliner cascadia tried using both usb and wifi connection i have cable with can 1 and can 2 continuity between 9 pin green connector to db15 connector. anyone have any info about the noregon dla+ wireless pcb. And supported protocols
Hello, is it possible to adapt a used camera to the Night Vision 3 system in the BMW F95 (the original one was lost in a road accident) or do I have to buy a new camera or a used set? Thank you.
Anybody successfully connected SM2 Pro to Witech 2? I have connected but it won't read the vin. I know it's not listed as supported J2534, but are there any solutions?
Hi guys, I was about to buy a Launch DBscar 7 interface to test it with something different from Diagzone, then I'm seeing this CRP919x BT wich has Dbscar 7 as interface, and I was wondering, is there any good with this model? Can Different versions from the original be activated? Like Xpro5 Prodiag or else?
Hi all. I have read the flash of a 2017 Fpace. It uses MED17.8.31. I'm hoping someone cane remove dtc P2189 for me. i hope im in the right place. Thanks!
I have problems canceling ADBLUE OFF in this RENAULT TRAFIC, it is one of the most modern ones I have done, I have done it at the beginning of 2021 without problems, but I have tried everything on this one...
I have tried with the module disconnected, connected, resetting before and after, AdBlue, also the oil even in the Renault house. and I can't solve it
I have already paid for two solutions and I can't get it to work. Can anyone help me?
upload ori
with ori on car and delete all errors with diagnose on eobd , after write solution all ok even drive 100 km!
After stop and leave ignition off for 15 min at first start all errors related on adblue and mileage come back in!
Attached ori and mod file!
Car can be diagnosed with ADT system!
UCH 8200500343 tentei torná-lo virgem com reno obd mas não tive sucesso, li 95160 e quero fazer virgem no banco com a intenção de codificar novas cartas, alguém que possa torná-lo virgem
Colleagues, I need values for calibrating
the front radar and blind spot system.
If any of you have access to such data, that would be great.
Toyota Sienna American version.
![[Image: imgpsh-fullsize-anim.jpg]](https://i.postimg.cc/LYHVqqKM/imgpsh-fullsize-anim.jpg)
![[Image: imgpsh-fullsize-anim-3.jpg]](https://i.postimg.cc/bd42WGCN/imgpsh-fullsize-anim-3.jpg)
![[Image: imgpsh-fullsize-anim-2.jpg]](https://i.postimg.cc/WD9dntqV/imgpsh-fullsize-anim-2.jpg)
![[Image: imgpsh-fullsize-anim-1.jpg]](https://i.postimg.cc/mcrDtRX5/imgpsh-fullsize-anim-1.jpg)
![[Image: ANCEL_DS700_9.webp?v=1726709370]](https://cdn.shopify.com/s/files/1/0072/5424/5449/files/ANCEL_DS700_9.webp?v=1726709370)
![[Image: ANCEL_DS700_10.webp?v=1726710342]](https://cdn.shopify.com/s/files/1/0072/5424/5449/files/ANCEL_DS700_10.webp?v=1726710342)
![[Image: ANCEL_DS700_20.webp?v=1726711843]](https://cdn.shopify.com/s/files/1/0072/5424/5449/files/ANCEL_DS700_20.webp?v=1726711843)
