I have an annoying problem: I need to do a transmission adaptation on a 2019 Focus, but if I try to enter the programmable parameters menu in the tcm, nothing happens, I just get thrown back to the programmabla parameters menu. There are no other functions in IDS, I cannot even find guided functions, it's so strange. It's like IDS is restricted down. I tried 2 different installations of IDS and both do the same (one was V118 the other V110 both with the programming extender). Can anyone help what am I doing wrong?
Hello!
Someone before has edited odometer and car does not start after battery disconnect, when i do it synchro CAS-DDE work good.
Inside CAS have fault A0AD.
Problem returns after battery disconnect.
I try cloning CAS (EEPROM copy) but fault is still active.
I think my eeprom is corrupt.
i have a C207 E400 that goes into limp mode and i believe its because i have a moderate to major turbo rattle. the code i get is P0299 low boost. i was wondering if anyone can remove the code for me with xentry/vediamo/monaco. i just want to see if i remove the P0299 DTC from the ECU completely if the car will give me full power again and not fall into limp mode.
4. Advanced Single PCB Board Design: This high-quality board design ensures exceptional stability, durability, and resistance to harsh conditions, making it a reliable companion for your automotive diagnostic needs.
5. With Comprehensive Vehicle Diagnostics: Easily access real-time data, read and clear trouble codes, perform active tests, and delve deep into your vehicle's systems for a comprehensive understanding of any issues.
6. Wide Range of Vehicle Coverage: Multidiag Pro+ supports a wide range of cars and trucks. Diagnose issues across various makes and models, ensuring you can efficiently handle any automotive repair or maintenance task.
7. User-Friendly Interface: Multidiag Pro+ includes a user-friendly interface, allowing both professionals and DIY enthusiasts to navigate with ease. Quickly access the information you need and perform diagnostics with minimal hassle, making it an ideal tool for both experienced mechanics and those new to vehicle diagnostics.
8. Compact and Portable Design for Convenience: Our Multidiag Pro+ is compact and lightweight, allowing you to easily carry it around for on-the-go diagnostics. Whether you're in your garage, on the road, or at a client's location, our OBD2 Code Reader is always ready to assist you.
Multidiag Pro+ Highlights:
1. With CARS, you are able to perform brand-specific diagnostics for cars and light vans from 1988 onwards. A total of 47 different brands.
2. With the Truck software package, you are able to perform brand diagnostics for light and heavy vehicles, buses, and trailers from 1995 onwards.
3. The diagnostic program GENERIC is designed for the legislation-based diagnostics, specially targeted for emission-related fault codes.
4. Support multiplexer function, 2xHS CAN (ISO 11898-2), SW CAN (SAE J2411), K/L (ISO 9141-2), RS485 (J1708), TTL, and (SPI, analog in, 5volt out).
5. High Quality With green dual board with 9241 chips.
6. Support system :Win7 32bit/XP/Win10 32 bit.
7. With Built-in Bluetooth module, will be better to use.
8. One year quality warranty, Powerful and in time technician support.
$39 To Get One V2020 Multidiag Pro+>>>>
For more details, feel free to leave your comments or send us a message.
2017 Range Rover Sport 3L diesel
No egine restart posible
costumer ignore wrring that restart will not be posible in 300km or something like that
now only massage on dash see attachment
whats the solution now ,whats the procedure to get this car start ?
I have a MED9.1.2 in a 5.2 V10 Lambo with a Fault for E throttle control. We assume its a internal ecu issue.
I have PCMflash and a scanmatic pro. Can i clone the "damaged" ECU and write it to another MED9.2.1 using PCMflash. And problem solved?
Or do i still need to immo off etc?
Looking to try and replace the ECU asap and get it cloned using that i have (Gen PCM flash and Scanmatic).
Hello everybody, can somebody help me to give Flash1 and Flash2 of an Airbag module GK2T-14B321-AC Ford Transit.
Because with writing with Carprog the software is corrupt. The module has 3 Flashs. Flash3 with 64KB I have written,
now Flash1 and 2 but I don't have them.
Thank you
I try to swap the ECU on a 2014 Tiguan 5N.
Both ECU have the exact same part number!
I read Pin and CS from both ECU's with IM508 and Gbox in Bench-mode. Then i used the "Replace control module " function in VVDI2 and changed Pin and CS according to the original ECU.
-->Immobilizer active!
Then i tryed with Autel IM508 adapt the ECU ->succesful, but "Immobilizer active"
Then i learned all keys again -->successful but still "Immobilizer active".
When i connect the original ECU, the car start without problem.
Version: 2024
Update: 01.2024
Size Installed: 54 GB
Region: All regions
Database Language: English
Interface Language: German, English, Spanish, French, Italian, Portuguese
O.S: Windows 10 or Windows 11 Pro x64
Hi, i am doing an engine/transmission m113k swap to w202 c43 1998, as we know c43 have the old bosch me2.0 ecu and the m113k has the newer me2.8.1, i did all connections swap as per diagrams from old ecu to new one, my problem is there is no start signal from eis to engine ecu, when doing detach/personalize with das it ask to start engine but no start i think no signal from Can eis to ecu, pin 4-35 on new ecu is start output to starter relay and pin D-3 on old ecu/sam is starter relay negatif i connect them.
there is 2 pins on old ecu/sam that i did not connect to new ecu cause no input to them on newer ecu which are pin C-40 N73 EIS signal and pin D-19 ETC N35 signal so i don't know if those 2 wires are related.
thanks.
Hello, can anyone help and provide a Damos mappack for the DQ381 file? I can’t find the RPM map for downshifting. I want the vehicle to hold the gear at higher RPMs and avoid downshifting.
Hello everyone need help reviving this ECU. Read by obd flash and write ok. After a secound file writing ECU brick. Read full flash+micro+eeprom by bdm. Cannot make ECU alive again even with original flash.
Need full backup for this ECU please or possible solution.
Astra H 1.3 DPF Auto Trans
MJD 6O2.AD
HW HW04H
55567515 HU
Regards
I´m looking for a diagram on the bosch ecu EDC17C49. It´s installed in a iveco daily 2020. I need to have information were the ic to the injectors is. Can someone plaese help me were to find this information?
[font=Roboto, "Helvetica Neue", Arial, sans-serif]good day. I am needing diesel car diagrams. What application do you recommend? all brands. I don't need heavy vehicles.[/font]
![[Image: XDTOFFLOG.png]](https://i.ibb.co/LP3yskt/XDTOFFLOG.png)
![[Image: Rate.png]](https://i.ibb.co/5MTRbXf/Rate.png){kind=small}
![[Image: Thanks.png]](https://i.ibb.co/JK8DZ1B/Thanks.png){kind=small}
![[Image: OFFLOG.png]](https://i.ibb.co/qWHGTGk/OFFLOG.png)
![[Image: cYeMnH2.png]](https://i.imgur.com/cYeMnH2.png)
![[Image: dkxALXM.png]](https://i.imgur.com/dkxALXM.png)
![[Image: GBVUwSk.png]](https://i.imgur.com/GBVUwSk.png)
![[Image: KhNgLlt.png]](https://i.imgur.com/KhNgLlt.png)
![[Image: vTBeoNa.png]](https://i.imgur.com/vTBeoNa.png)
![[Image: hPziasN.png]](https://i.imgur.com/hPziasN.png)
![[Image: LRoa5MR.png]](https://i.imgur.com/LRoa5MR.png)
![[Image: T9FrNjq.png]](https://i.imgur.com/T9FrNjq.png)
![[Image: DjVrG6a.png]](https://i.imgur.com/DjVrG6a.png)
![[Image: ccZd00a.png]](https://i.imgur.com/ccZd00a.png)
![[Image: V2020_Multidiag_Pro_1_grande.webp?v=1726724625]](https://www.vxdas.com/cdn/shop/files/V2020_Multidiag_Pro_1_grande.webp?v=1726724625)
