BMW X5 E70 CAS 3+ flash need pls if anyone has 5WK4 9516GBR THANK YOU

HI all,
my C4 was working fine with version 07/2012. I installed version 03/2014 on another HD and I added the C4 with the same IP. It is recognized via wireless but it cannot connect with the car reporting a connection error (9500). If I use the old version (07/2012) now it is recognized via wireless but not via the SDnetControl manager - only via network cable. I re-sent the configuration but it still won't be recognized by SDnetControl even if it is seen through wireless and connected.
I wonder why it doesn't work with the new version nor the old version anymore - I also updated the firmware of the C4 to the one suggested (boot image 2.0 and 20110502) after trying but still no luck.
Any hints are appreciated!

Hello,

I have problem with this car Kia Sorento 2002 2.5CRDI.
When i put in Auto i think 4wd working good ,but when i click on the Low , in cluster light don't show Low wheel. And don't work

Maybe some one can tell me were find 4WD(transfer ecu ) ? i searched in all car but don't find :/

Thank you.

Download Been Deleted...
Please bear for the New Cd Version...
Thanks...

Attached Files

Link.txt

457

75 bytes

Download

Having problems with a 2001 Clio 1.5dci with Delphi DDCR ecu.
Chinese clip communicates fine with immobiliser and uch but cannot connect with ecu for some reason. All I keep getting is 'ecu not recognised' and therefore impossible to check for fault codes ect. Tried another working ecu and same problem so assuming clip is to blame. Strange thing is it reads ecu part number and software / hardware numbers etc but no comms for diagnostics. Weird or what! Tried reinstalling clip software (V116) and the four drivers with clip connected to car but still same problem.

Also have Abrites avdi and that cannot communicate with this ecu either. Are these early clios non compliant with diagnostics although would have expected clip to connect ok seeing as Renault tool?

Hi. l need this,
Ref. 0281 010 360 y soft 1037 353 444. Flash + inmo 5p08.
Tipo edc15c2.
If it is not free , l can pay-
thanks.

I have golf 4 1.9 tdi.
ECU: Bosch 0 281 001 846
038 906 018 BM
here is original file. please i need immo off file..

Attached Files

dumpfile.rar

92

274 bytes

Download

Hello

I have a ECU Continental Simos PCR 2.1 Ref.: 03L906023M or 5WP42813AA i need to Put it Virgin or immo off Can anyone Help me?

Best regards.

Hi and welcome please if anybody can help
I'm looking for the code of this autoradio and
thx too much for u people

thx in advance

Hi guys I'm new here.

I have a Renault Laguna II (2002, 1.9dci) and I got one of the CliP devices from eBay that lets you edit settings on the ECU and clear errors etc..

My car was working great (finally!) but curiosity got the better of me when looking at configurations in the UCH menu. I saw something which said 'Type of Power Steering' and it was set to 'basic' but also had the option of 'Variable'. So I selected variable.

When I restarted the car it gave an error about the power steering system (DF102) so I went back in and reset it to 'basic' and deleted the error code. However it keeps coming back! Despite setting the power steering to basic there seems to be something left in the settings looking for the variable power steering motor. I found a few other menu / pages that refer to the 'function variable PAS' too.

Can someone help me with how to get this back to normal?!

Hello,

Please, someone help me :

I bought a VAG CAN Commander 5.1 full cable and doesn't work ! I tried to connect on Golf MKV 2004 with "original software", some version from this forum and vag can commander 5.5 version and no succes !
Error : "Target unit not responding"

In device manager/ Hardware ID's appear with VID_0403 and PID_6001 ; it's correct ?

what I can do in this situation ?

I attached 2 printscreen

hello all member please you help me for trouble code P1570 S 320 mercedes befor this car have problem with unknowe key and my costomer take this car to garage other . now car can start but when i start engine and switch off key (remove key from cylinder )on instrument show ESP ABS and other indicator same turn key switch on .i think that this problem wrong program key .i need more idea from member this here .please you help /

Hi
i have no display on my dash spark 2011 black screen who to repare this screen pls
thanks for help

Attached Files

Thumbnail(s)
   

Hello,

does anyone have full BDM file for a Grand Punto 90cv ecu
51784562
MJD6F3.PB/HW03P/3143-PB57
5ZS-FZTCF

car start but give checksum error. I need to try another bdm file to see if is software error.

Best regards
Rmp_silva

Hi to everyone

In my workshop I have polo 2013 6R
there is no connection with BCM
I want to change with a used one but
I couldnt ffind any way to clone the ecu
does any one know how to code the used ecu


Thanks....

hello peoples. i need help for modify the Km on lancia thesis. i have a carprog. is it possible with this ? this is the first time i use it. thanks

hello all member please you help me .i have abrites 72 original ID170116 i use this tool with SDD v 138 with pass thru but show than auto update . but now i use with normal but now this tool unknowe USB .please all member help me .

Professionel tuningfiles

edc 15-16 tuning file 45- 60 euro.

edc 17 60-75euro

dpf off 35euro and up to 75

egr off 25 euro and up 75

dtc off 25euro and up 75


other ecu simens marelli ppd etc tun file 75 euro

Turbopetrol files 75euro and up

90% off files is dyno testet all files is personal edit

allway specify year manufacture engine ecu when contact me

Please contact via skype or mail

Regards http://www.mrmotorsport.dk

Skype [email protected]

Email [email protected]

Payment via Pay Pal

Hello
if somebody has a recovery disk for Panasonic CF 53 MK I and willing to share or sell for a reasonable price
please PM
Thanks

Hi every one.
I'm working on Audi TTS MK2, there was stranger thing, it lost ESP and ELectric Steering assyst. Reading our code, it said that angle sensor deffective, after replacing 2 angle sensor it still have problem. Then i'm going replace Electric column module, it still won't help.
After replacing both angle steering sensor (G85) and Electric Column module The fault code was said that voltage teminal 30 supply for Angle Steering Sensor..

[/php]

Pull out the sensor it through out another code said that Angle Steerung Sensor defective.


Any one have experience with thit please help me

Does any body know how to reset service light of Mercedes S500/550 MY 2014 (model W222) by hand in steering wheel ? please help me.

Attached Files

Thumbnail(s)
   

Hi Guys, I have a bit of a problem. The chance came up to purchase some taxi cctv cameras x9 plus the recorders from an ex agent of the company who makes them, Anyway after installing these units to set vehcile details time date etc and make sure position and focus was ok. you needed to use sercurity dongle made by alladin, to be able to do so. well having only one and currantly unable to find or replace help is needed as to try bypass or a way to reproduce 1 to maybe allow me to get into the program..... really stuck any help really gratefull.

thanks in advance guys [/b]

Hello!
I'm playing with a A6 now, any one got tested/safe tuning file for me to compare?Or any info on how far I can go with boost...or any 170 bhp bin from edc16u31 passat/a4/a6 any sw if tested safe...
ECU Manufacturer: Bosch
ECU type: EDC16
ECU Hardware Number: 03G906016MF
ECU Software Number: 391830
Thanks in advance!beer

Hey everyone,

Curious if anyone is able to write a program to delete egr, dpf, def system. I know theres tunes out there but they set monitors to N/A vs complete curious if setting them to complete would be possible. Any helped would be appreciated thx.
For offroad use only ofcourse.

Hi Guys !
This Week will come one Customer to my for SBC Reset W211 ! I have Clone Star from China but i have not do any Job with them and will do SBC Reset on this Car ! Can Anybody give my Instructions or Video or Anything what can help me for this Job ?? Please and Thank you !

Hi all

Please i need info to read an ecu from Seat Ibiza 2013 engine CLNA

Ecu ; Continental
I want to read it & make it with dpf off

I don't know witch programmer shall i use !

I've Fgtech V54, V53 europe clone and Ktag

Here u r the picts of the monster !

Thanks in adavnce !!!
---------------------------
EDIT BY MODERATOR mariusmilanezu

Thread MUVED >>>>>>>>
Take care where you post next time!!!!

Attached Files

IBIZA CLNA.rar

64

4.53 MB

Download

Hi,need help on 1d69j mcu.If i buy a new ( not used) motorola hc05X32,it will work on EIS if program eeprom ?
Had damage one...
Thanks and regards

hi guys i need the saturn astra v30 bin files if anyone have them available for the tech2 scanner,

i purchased the scanner and purchased the saturn card but the card i got was version 31 which only does saturn 2008 and up and i need it for a saturn 2007

if anyone has it and can send it to me that would be greatly appreciated.

2007 Nissan Murano instrument cluster board is different that Digiprog 3 V 4.88 shows in the manual. The Digiprog 3 and the instrucction manual ask for adapter #47 and shows 7 point to solder the plug's cables in the cluster board but I can't identify it because the cluster board that the SUV has is different.
See both files.
Any suggestions?

Attached Files

Thumbnail(s)
   

NISSAN MURANO.pdf

73

315.82 KB

Download

I need the original file of this unit 0261208253 SS from Corsa C Z12XEP 2005. The car is broken and I can not read the original map. I got one in scrap but do not have the same reference. If anyone can help, thank you.