I would like to title the decode partial of this car ... with time and carsoftware 5.2 's car will not start

I need tunning file for Zafira 2.0 DTI X20DTL 82cv 0281010021 VM0M1010_S

Thank You.

BMW, Mini, Rolls-Royce SP-Daten Full v2.53.0

E36, E38, E39, E46, E52, E53, E60, E65, E70, E83, E85, E89, F001, F010, F020, F025, F056, I001, K1X, K001, K24, KE01, KH2, R50, R56, RR1



And do not forget say and press reputation button

Attached Files

BMW SP-Daten v.2.53.0.5.rar

490

101.59 KB

Download

Hello all!
I am trying to update my SDconnect with firmware Update25 as posted following the guide. Everything goes smooth until after about 30seconds after I start the update: the SDConnect reboots and does not update and I receive DCD_I error 747 **or** error 780 (SDConnect Hardware defective). The SDconnect works fine with Xentry 07/2012 but not with 11/2013 (I guess the firmware is too old).
Current loader and firmware on SD is:
OS: 1.8.20070611
CSD: 1.21.20090827

Maybe I have to update to an intermediate version - if so where could I find it (update_manual files)? If not what could be causing these errors? The SD connects correctly and the files are sent. I guess the SD reboots to start the flash and somethign goes wrong. Thanks for any feedback!

Update: I tried several times and the errors seem random, I also received error 749 (network problems) but I also once received "Succesful Update" though the SDConnect after reset is always the same version!

Hi all.
Posiblly it is a stupid question. I would like to check by part number in what vechicules part was mounted. I've read servicebox documantation and help files and seems that such an option is unavailable. Please guid me if it is possible.

hello everyone, I have a problem with an ECU mjd 8F2, I tried to read the st95640 to make partial DECODING, but with immo universal decoding 3.2 after loading this file read with upa.
http://www.mediafire.com/download/kbdq4s...d8f2g2.bin

i obtained this:

http://www.mediafire.com/download/q410eh...vergne.bin

but the car don't start.




I tried to play with cock v52 to make the total, following this guide,

http://www.mediafire.com/view/soayd11e2s...8f28df.jpg

in jtag but can not read it and I from a series of lines, and I do not know how to do, I read on the forum that should be read in virtual read,, but what does it mean?. and it takes an original file OF THE FLASH MPC to be able to read and edit what someone knows how to do ? . there is a guide about this?



please help me , or decode mi ori file st95640 for verginize.

Hello i have BMW 525 and i have replaced new ECU but i need to replace IMMO eeprom to New ECU and i dont know which one is it ? ANY HELP
here picture of ECU..

Attached Files

20140702_110824.rar

48

1.42 MB

Download

pls need pin code for V.I.N VF37B9HXC68525573

Dear Mates,

Many Thanks for this very very useful site.
I want to purchase new Multiplexer for Merecedes Benz vehicles can someone tell me it is good one in bellow link:
http://www.dhgate.com/product/mb-star-c3...3700936491

Can I buy it or kindly suguest any gud one without laptop.

I am living in UAE.

Thanks

Need code for Ford
Serial V021616
Thanks in advance

Hi,
Could you give me please the pin code of Clio
VFICR2T0H44138080
Thanks in advance

Attached Files

UCH 95160.zip

44

568 bytes

Download

Maybe helpful for somebody.

digiprog can change mileage of porsche 996 via obd in dash.

is changing the mcu box optional for this car, or a must?

thnx

Technical notes, manuals and other stuff from Magneti Marelli Spain.

Enjoy it!
-------------
EDIT BY MODERATOR mariusmilanezu

Please READ the rules (HERE!)
Rule #07.
DO NOT post Links on the Board! Links must be attached in a text file!

Link.txt

130

60 bytes

Download

Hello MHH users,

Attached is a data log of a 2001 Volvo V70 throttle test, from DiCE

   

The vehicle has a few running issues - occasional stalling, occasional poor idle control, occasional unwanted acceleration.

I think it is due to the electronic throttle control.

The pedal sensor appears to work perfectly.

But data logging the throttle test, I am getting flat spots in its motion, and watching the butterfly it jerks around and does not move smoothly.

Is this an issue with the potentiometers?

Regards, Threepot

Firstly I am hoping this is in the right section.

I have recently installed Diagbox 7.02 on a new laptop, everything works fine until the end where when I try to use the software I get the message: 'An internal communication error has occurred'.

Has anyone came across this before?

I've used the Scary install version which I was given my a friend. I hope this makes sense.

This is the Vehicle folder of the autoboss elite v30 updated in the first quarter of 2014 test and send feedback if it works with expired devices.

EDIT BY MODERATOR mariusmilanezu

Please READ the rules (HERE!)
Rule #07.
DO NOT post Links on the Board! Links must be attached in a text file!

Link.txt

140

77 bytes

Download

I hope someone can help me with a tested clear one.
Ecu is 65.77 9184432 Bosch 0 285 010 070 from BMW
Thanks in advance!

Attached Files

0285010070_CRASH.rar

70

1.93 KB

Download

hello
what can be reason for fast discharging batterys in nec m.b. key? batterys working two deys only.
roki
best regards

hello I need key for this ezs. key is Motorola. ezs is hc5x32 1d69j thanks!

Attached Files

ezs hc05x32 1d69j clk 208.rar

29

349 bytes

Download

Fault code 2782 Exhaust canshaft sensor bank1 implausible number of phase edges
The fault occur after many times engine start
I already replaced the sensor, line check, swap DME control unit and replace new sensor's wiring also, but can not solve the problem
Anyone who know please kindly give me a solution
Have a nice day

hi i need pin code from bcm astra j

Attached Files

astrajbcm.rar

56

906 bytes

Download

hello

I need full wiring diagrams for Dodge Nitro 2.8 CRDI, 2007 year.
Best thanks.

Hi.
It previous payed for a file to a vw Touran 1,9 BLS engine. File was made from BIN file i read out of the ecu..

Is it possible for me to use it on another 1,9 Touran or other VAG cars with same enginecode, or is there some info like VIN who needs to be altered ?

Manuals for tractors, engines an other machines Size: 7.25 GB


Files:

Files List Here!.txt

972

42.06 KB

Download

Attached Files

Manuals for tractors, engines an other machines.zip

567

32.62 KB

Download

Hi all, I have a 2 galletto master, can someone help me, how do I read and write in Bosch ME 7.5.x?
in the documents of fgtech has nothing saying

i bought a clone galletto1260 to do a remap,but cannot get it to identify my ecu data type etc. It kept saying "error wake read" i think iirc.also sometimes says "switch of ignition for 10secs then turn back on dash wait 10secs then proceed",but same message keeps appearing etc etc.
i have a mk1 octavia 2002 tdi 110 ASV
my vcds 12.12 works ok on car.one thing though,when i use vcds to go into instruments then advanced measuring blocks then goto "lock out time" for instrument cluster i get a 8 minute lockout time straight away. also the standard 13861 login (i think) doesnt let me login to instruments,so puzzled with this also.(this also increases lock out time each time wrong login is used.
im wondering if car has been remapped already as have read that cluster has maybe been replaced /tampered or something.
also the galletto1260 software doesnt have 'skoda' listed so i went with volkswagen then edc15(i think 'v')/octavia tdi.
does anyone have any advice?
can galletto cable be reprogrammed to work as a mpps cable(ie ept/mprog)?
i can connect btw with vds pro in dos mode on pc with serial rs232 vagcom(blue) cable to do auto window close procedure.can ecu be flashed with this cable?
surely if i can read eeprom etc with vds pro i should be able to at least read ecu with galletto cable.
have heard edc15 can be hard to work with ,with galletto unless on bench. have also heard that vcds cabl in dumb mode with vcp drivers installed will do the job also.true?
so many questions to ask as been at it all day.ned a bit of luck haha

Hi
who has?

include keygen

undefined

My MSV-2 has suddenly corrupted and I cant reflash it, does anyone have one that they could make a backup of the data on the usb memory inside to help me out?

I think that if I can get it up and running again I can update it and get it going again.

I would really appreciate some help quickly if anyone can help me out.

Thanks