I have a W211 in my workshop. The problem is that when I put the key in EZS recognize the key very hard (after 4-5 sec and have to try turn key)
and after start engine there is no supply voltage in dashboard, FAN working full load etc....
EZS processor is HC12, the older model
Hi all.
Got an original Kess v2 running latest software, but have read on here that it can be changed to master.
I am not in any contract with the master, what is the best ways to do this.
I want to read the files then tune them myself and share my experience on here.
i installed the xprog 5.45 on my machine and it worked for a while and now it just doesn't want to run. it shows that its trying to run cause i can see the process in task manager then it just crashes without any error msgs. i tried to install it on another computer and there its giving me an error that says "xprogdesktop.dll has encountered a problem and needs to close" i have an original disc and now don't know what to do
ElsaWin v5.0 Plus Pack 2014 (Updated 10.06.2014) | 68.86 GB
Elsawin 5.0 contains all information for diagnostics and repair of Volkswagen, Audi, Seat and Skoda cars till 2013! Covers detailed and complete description of the technology of repair, maintenance, diagnostics, electrical circuits, body works.
In this New Release version now we have 6 DVDs instead of the usual 4 brand DVDs:
Now we have a single DVD Common to all brands (6) building from the previous 4 brand DVDs.
And another, Volksvagen Commercial (5), removed from the original Volksvagen DVD. DVDs:
1. Audi (02.2014)
2. Seat (01.2014)
3. Skoda (03.2012)
4. Volkswagen (06.2013)
5. Volkswagen Commercial (06.2013)
6. Common to all brands NOTE:
1. To make an update from a previous version, first, delete the file: C:\ElsaWin\config.xml
2. Install DVDs 1 to 5 (Or just the brands that you need)
3. Install DVD 6 (Common to all brands)
Installation Procedure
The main requirement before you install ElsaWin Version 4.0 – installed on your system Adobe Reader. Minimum version – 5 (There is a distribution) or later. Installation procedure is simple:
1. Install setup 4.0.
2. Install update 4.1.
3. Install update 5.0 (not a mandatory item, because the base is installed and the version 4.1)
3. Install base.
Just need to install SVGView.exe – he needed to display elektroskhem.
Name / password to login: admin / admin
Detailed instructions for installing ElsaWin 4.0 and 4.1 from say2108 – listing Documentacia.
Download
Please READ the rules (HERE!)
Rule #07. DO NOT post Links on the Board! Links must be attached in a text file!
I want share my Crack Mitsubishi ASA All Version for all member mhhauto.com
at file included my guide..
Enjoy.. And Good Luck..
It takes time to upload and only 3 sec to press thanks to show your appreciation.
That will give me more mental energy to upload more stuff for you all
Having our device withing few seconds you might to decode, for example the following models:
LCN,LCN 2,RNS310,HRNS,BE-2580,RNS300, RNS315, RNS510, RNS810, RCD210, RCD300, RCD310, RCD500, RCD510, RNSE-PU 2010,
RNS E FIS, Ford V series (based on TMS470 , ST92f, MC9s12),Opel Touch Conect itd...
Our device works as programmer for: i2c, Micro Wire, SPI, Motorlola 68HC(7)11, HC(7)05, MC9s12, NEC v850, St92f, Renesas m16/32c itd....
A few additional options;
- Locked and Locked 13 repair
- Opel CD30,CD40,CD70..... unregister
- Cancheck reoair, disbled,prod,secure etc (selected models)
- Vin repair (selected models)
- scanner built in; can,i2c,com
- Virtual Device - the ability to emulate various interfaces with the specified parameters.
In Tool bookmark you can find:
TX (K-line),RX(L-line), (range of 0..9V..+12V)
RX (K-line),TX(L-line), (range of 0..9V..+12V)
K-line, (range of 0..9V..+12V)
L-line, (range of 0..9V..+12V)
UART1, (range of 0..+5V)
UART1 - inverted, (range of 0..+5V)
M-Bus (range of 0..+5V)
RS232 (range of -9V..+9V)
- Nissan LCN / Opel Corsa Touch & Connect (within the activation OMAP5948) original code reading
- full support (read, write, erase) of M35080 3/6/V6/VP/D80/D160 (under the tab of programmer)
- new user interface - easier and faster selection of models, more features
- read / erase / write Serial SPI memories like MX25L160 , W25X32 and F-RAM eg. FM25L04
- RNS 315 original code reading the without the use of expander (procedures work independently without control computer)
- JTAG programmer (in development)
- in many cases, support K / L - Line without external power supply 12V
- K / L support in different voltage ranges from 1 to 15 V (programmable)
- 10 universal I / O lines with programmable logic from 1 to 5 V
- UART and RS232 (separate outputs for RS232 - a standard PC or signal level from -9V ..+ 9V )
- UART in logic from 0 to 15V - max voltage from 1V to 15V
- RS232 with the range of -12V .. +12V
- work on USB power + the ability to work on external power
- possibility to supply external circuits from the box
- Vreg - programmable voltage from 0.5 .. 5V (max voltage dependent on the performance of the computer USB)
- hardware and software support for most protocols OBD ( ALDL, OBD -I, OBD -1.5, OBD-II, EOBD, EoBD2, JOBD, ADR , SAE J1850 PWM, SAE J1850 VPW, ISO 9142-2)
- device is fully expandable, on the request of customers also
- programmable current protection outputs, IREG (sum of all outputs IO1 .. I08 + RX + TX)
- analog inputs - ADC-A, ADC-B
Box III specifications:
- diagnostic DB25 connector (inputs, outputs, TX232, RX232, CAN L, CAN H, K-Line, L-Line, Vreg, ADC-A, ADC-B)
- USB connector
- 9V external power supply connector
- 4 led diodes (BUSY/ERROR, CONNECTION, RX, TX)
- firmware update on the fly (in background, changes came after software close)
- drivers installations directly from windows update xp/vista/win7/win8/win8.1
Dialogys – an electronic version of documentation for RENAULT and after sales car RENAULT, DACIA.
Dialogys includes everything guidance on repair, diagnostics, and parts catalogs for all models of cars Renault.
Circuit wiring in this program.
Tehnoty MRy in ENGLISH car after about 1996. release.
Goal VINu car if you are not a dealer, NOT POSSIBLE! Installation:
1. DVD0
2. DVD1
3. DVD2
4. DVD3
5. DVD4
(Comply with the order)
Year / Release Date: 2014.21.03
Version: 4.28
Developer: Renault S.A.S.
Language: Multilingual
Tablet: Not required
I want to buy tango key programmer, i search and finding a many tango's version, i does't understand which is better, please help and told me where is good
Here is the update i've bought for my DP3 with SN: 590C8F0E0000 ver.4.88
guarantee to work if you follow direction.
I will appreciate if you hit " THANK YOU" and "REPUTATION+"
PASSWORD IN PM
Hi,
Anybody know where I can get good quality(not scanned) JS110 service manual? Tried a tradebit purchase but quality was very poor, wiring diagrams illegible and latest service manual disks don't have it.
After a few months of service, my SD connect stopped working, throwing an error that reads like: DCDI_e ErrorCode=204 (204).
I could not find a reason for this error so far.
Searching the forums some people reported a battery issue, but I tried with two sets of fresh batteries with no success. Also, the SD connect does not show the exclamation mark on the display (!). Instead, the serial number is not displayed any more and it reads *IOERR as in the attached picture.
Can anyone help with suggestions/files to fix this problem, please?
Need some advice with this . I just purchased 2ND hand /used Kit from USA via ebay ,laptop has 2014 us software and coms with VDI but if i try another laptop i have with 2013 EU soft no communication . Is it a firmware issue , please any advice <=> Ok update i loaded EU software on USA laptop and now software was asking for SDI model code and now is asking for ( Country distributor Code ) EU i gess , can any one help Please . If you PM me with answer i will pay , desperate
Hello, everyone, I removed catalyst converter from my Passat 1.8T, but after that the car lags over 4000rpm really bad. Is it possible that the sensors are problem. Can someone help me disable them in my file?
DTC are:
- 16524 (P0140)
- 17522 (P1114)
- 16804 (P0420)
Hello mates,
I have a problem with one flooded ECU A 026 545 69 32 on MERCEDES W163 ML4.3l engine. I bought second hand ECU with the same number. The ECU is not a virgin. How can I do this ECU virgin?
Thanks in advance.
Can anyone tell me which version that is (Alliance or whatever)?
Is there a way to install this on WIN 8.1 - 32 BIT? - It came with ver. 139 software (I can restart with disabled drivers signature control - has anyone tried and succeeded)?
I did install on old win XP laptop, but would much prefer to use my newer win 8.1 laptop
Have just last week come Autocom new VCI and 3/2013 software.
I try to program CDI jet 'pre code' or how you say it. It stop when i should prog new number. Now EDC light is on and eeprom fail p1617 how i can make it prog fine?
help!!!!
![[Image: full%20pack1-700x334.png]](http://help.martech.pl/sites/pliki/resize/files/full%20pack1-700x334.png)
Here is JLR V138 LICENCE fully tested works fine !!!
:
