Hello
Need radio code:
SINGLE CD KW2000
8M5T-18C815-AA
V058974

Thanks
Best Regards

Hi!
Can you give me some info about DPF switch in this file? ECUSafe can do it properly I think, find switch and more, not only DTC table....

I have the following problem:
On a mercedes W 204 000 1A..... the ABS original module was break in accident.
I have found another SH with the same number.
When this module was mounted on the car i have found the principal error "INCORRECT VIN NUMBER".
I can see that car only with xentry (i use das - xentry 11.2012), i can re write the car vin in module.

if someone has any ideea,

Please, please, please help me !

Hello, i try to install the WIS 07.2013 Version on my PC. When start the installation prompt after 2 minutes end and you can see only the icon on the desktop but WIS is not installed full. I used the setup.ini of weryo that normaly works very well. but now i got problems and i dont know why. when i install WIS 04.2013 Version it works very fine. But the 07.2013 i get problems.

Thanks for your help.

Close

Hello all MHH members..
Here is CarProg v5.31 + [lib] files + work on CLONE devices.
Inside package are install instructions and a lot of [.PDF] user manuals
Tested & worked...
password for unpack file: obdstart_carprog_235789
password for .txt dowload link: obdstart_carprog_235789
Good luck !
P.S. Dont forget thanks and/or reputation button!

Attached Files

Link CarProg v5.31.zip

1615

282 bytes

Download

CarProTool Server Ver.10.10.2013 Released

- OPEL Navigation TOUCH & CONNECT (OMAP5948) Code Reader Added
- SUZUKI SX4 Bosh navigation (OMAP5948) Code Reader Added
- Oryginal PIN CODE reading in few seconds.
- Working by TEST POINTS.
- Its FREE UPDATE for all Nissan LCN activation Owners.


Best Regards CPTeam
Support web : www.carprotool.com
SHOP : www.diagcar.eu

Attached Files

Thumbnail(s)
   

hello

i am user uk138

i have problem with unit airbag mercedes vito.

unit bosch bosch 0285001448 q6

the memory is mc68hc12d60

I need original file without impact.

this unit introduces failure drive off

and I need original Virgin file


attchment file unit orignal with fails


hope

reply thanks

Greetings.
Please - ISN code from the ecu Bosch 0 261 204 467 DME 1

B58791M (29F200) BMW E38 740 4.0 1998g.

Thank.

Attached Files

ECU_29F200_DME1.rar

66

77.03 KB

Download

Does anyone know how to immo off on Citroen Xantia 1998 immo off,it is a car that doesn't have ECU(or I can't find one).I only found Texton(I think it is a body module) with 93c66 inside.

With kind regards,
Sima

Just unpack the archive into a folder C \ and work
Do not forget about the thanks button

Attached Files

1.rar

568

139 bytes

Download

anyone can make this? no paid offers please, of this I can have mill... changing is no prob

Hello Friends,

I have a problem with a citroen c4. The timing belt was broken and we have the cylinder head replaced. Th engine is now bad idle and idicates a fault. p0011. Is it possible that the valve is broken now or would it be the camshaft sprocket. p0011 means that the valve for camshaft adjustment is broken. blocked in the upper location, but I can not understand why this is now broken

who has an idea

Hi
I have installed diagbox as per instructions to 7.02 when trying to update to 7.19 from updates that came with install pack (scary01) i have no internet connected but after update installed it wants me to reactivate but fails. Any help please.

hello,
is it possible to program this kind of Mercedes key? (attached photos.... )
i got it new from Mercedes,it was ordered to direct Vin. but the car did not recognized it.

Can someone make update for brainbee fast box 2...THANKS

Sent from my GT-I8190 using Tapatalk now Free

Hi Guys,

Looking for a recommendation on a simple Eeprom programmer, for use on mostly 93c** chips. I mostly just do dash chips on Japanese vehicles. Happy to modify the hex files myself, looking for something to read and write - preferably in circuit with clips rather than removing from board.

Any help/advice appreciated!

Thanks,

Mike

hello all member please you help me buy ABS toyota prius 2004 second hand . thank in advance

Hello Guys,

What low cost programmer do you recommend for turning off immobilizers on Daewoo Matiz?

I used to use the immo emulators but now it stopped production, so that solution is no more available..

I would appreciate any useful reply!

Thanks!

anybody have the VAG ODIS Engineering ?who can share something ?
thanks!

Hi there,

Can anyone help me with this problem.
Have got a Nissan Kubistar here, where I don't have the engine code, just the VIN.

This is the VIN: VNVF11EAFUU025688

Can someone tell me the engine code K9K ???


Thanks!!!

dump ori 95160

Attached Files

mazda eproon ori con wellom.rar

51

782 bytes

Download

Hello I want to bring to your attention the program which is able to activate the navigation in the BMW automotive systems without buying FSC code. The program works with any interface.
   
   
   

I need a five digit pin to program a new key to Kia Sportage. The only pins i can find are six digit pins. It is a 2001 year.
Any Ideas?

it's available from official download page : http://spd.multi-diag.com/download.php?f..._29.11.zip

to install it you need to install 3-2013 DVD first, which is nowhere to be found....

it appearead around 1 week ago... but it's created on 26 of July

Could you kindly assist me with activation code for both fsa and laptop.

Customer code: 0076038634 and id W75Q.JL77.KXEN.RWJG

And: Customer code: 0076038634 and id W44R.2EKK.XW677EJN

Esitronic 2011 Q4

THANKS

Hey Guys,

I have had this for awhile now... have to admit that I have not used this, not even once But figured someone may have a use for it. If you download this and test it, could you please provide feedback for the rest of our fellow MHH members who are interested From what I know you can use K+DCAN from INPA. Let us know



Cheers!!
Mike

Attached Files

BMW Scanner 2.2.txt

691

60 bytes

Download

please clear crash data MB Ml
bosch 0 285 001 998
95640

Thanks

Hi everybody,
I have link torrent ElsaWin AUDI version 4.0. I want to share to everybody.

Attached Files

Elsa 4.0 Audi - 05.2012.rar

318

38.07 KB

Download

I'm fixing a friends SDS laptop and he want's 11/2012 on it. I was wondering if anyone had the 11/2012 Addons and fixes handy that they could share??

I'm offering beer!!!