Hi!
Porsche Cayenne V6 3.2 ME7.1.1
Can someone confirm if this is 100% original file? It has faults that feels like maybe checksum or not right orig? Car starts but interior things are shutting on and off.
Picture of ecu tells me that the sw is different?
Hello, I have a problem, I did DPF off to a OPEL ASTRA H 1.7CDTI ECU DENSO DECE01 and after some kms always appears glow plug lamp in dash.
Car runs normally, without problems, and i can disable lamp reseting dpf with autel, but after some kms always appears.
I read that in this ecus need to disable DPF from dashboard, so i bought an OPCOM but for my surprise when I go to to dashboard -> program there is no DPF, a lot of options but not DPF on this model. So... how can i remove the light?
I have swapped an m57 from an e90 330d into a 320d (n47) shell. I have done all the physical swap, it’s starting using easy start.
I have been getting error 4A41 and 4A42.
I have checked the UIF in inpa and I’m getting a lot of vin mismatches. I have attached photos of inpa readouts.
Any help would be appreciated
Is there someone that already have a small program made in VS or other similar,
to make some bin files content calculation (pin code for example), or modify
some bytes?
I have a little knowledge about programming languages, and without experience.
I appreciate some help from any member, just for a simple start.
After i could make some small programs to implement the appointments i have for file modifications and calculations.
I have a problem with CHAS pld file programming by SA after JD pld encript-decript tool changing.
Original file which I attached is programming without any problem, but if I use JD pld tool I cant programming any files.
Even I dont make any changing in file, only encript and decript the problem is the same. I dont know where is the problem, I used this JD pld tool many time without this problem.
Can anyone why have JD pld tool check for me this file? The main task is change speed limit to 55km/h.
Hello, Audi A3 CCTA DSG jerks when accelerating. The car has been chiptuned stage 1. The logs and program are attached. Car is stock. After remap was okay, after two days car starts jerking
Proudly present you my first public patch release exclusively for MHH. WinOLS 4.7 Launcher 2024
What problem is this solving? - This WinOLS-Version is obsolete and some functions were deactivated. Please visit ecv.de for a current version. - Unable to browse the internet because the date of the machine changed while using the software.
Solution? - Option to toggle between the dates while using the software. - No more save file with old save date. - You can now browse the internet while running the software.
I wrote the patch myself based on the previous patches because I wanted to browse the internet while working with WinOLS.
For software installation files browse the forum. There are working version.
Here is simple tutorial how to use this simple patch.
Copy the WinOLS 4.7 Launcher 2024.exe to any destination on your computer.
Right mouse click on it, Properties and check Run this program as administrator, apply, close.
Double click on WinOLS 4.7 Launcher 2024.exe and wait for program to find your installation files and it will run the OLS. Make sure you have it installed on the required standard places such as C:\Program Files (x86)\EVC\WinOLS\ols.exe
C:\Program Files\EVC\WinOLS\ols.exe
Wait for OLS to be launched.
Now you can go back to Launcher and press (1) to change to "real date".
If you are facing any issues while working in OLS you can go back to Launcher and press (2) to change date back.
After exiting the OLS, Launcher will automatically change date back to the original one.
I hope you like the solution and it come handy for you.
If you like my work and would like to get more please press Like and give me Rep. It makes me feel good.
Hello, I bought X431 PRO3S+ V2.0(98928) from a flea market - wrote the username and password on a piece of paper (The tablet's battery was empty). When I enter the username and password at home, it says they are incorrect. How can I activate the device?
JLR have finally made changes to the DFSM server to improve security, this change has the effect of stopping all earlier applications including SDD, Pathfinder and CCFEdit from downloading from the DFSM server.
Everything is remotly installed via TeamViewer, Anydesk ...etc.
Price is 350usd.
i have problem with a audi a4 1.8T 163hp with a me7.5, when i drive in a high rpm the car goes in overboost en goes in limp mode.
already replaced the N75 , MAP and checked the wires and connection of it all good. also check for leaks with smoke tool , no leaks.
overboost actual goes sometimes to 2.5 bar
a friend of my told me he had the same problem and a tuner made some modifications to it so, it wont run in the overboost problem again.
Hello guys. Need a working (or repaired) dumps for TC277 Infineon TriCore for 48v Lithium battery Mercedes W223.
Who can help me out and repair. Please
Bought a Taycan from Copart, minor collision (no airbags deployed) HV cable in the front was disconnected which is now sorted but car isn't starting. Still shows the code for "high voltage fuse b"
Been told the battery needs to be reset. Can anyone in the uk help?
Ideally in the east Midlands area.
Hello.
I'm looking for someone who can tell me step by step how to install GDS2, Tech 2 and SPS on a Mongoose Pro passthru cable, including links to the programs I need to download and install. Of course, not for free.
Hello, can anyone tell me what performance is possible on my engine? Everything is original, only 4 or 5 holes were made in the dpf because it was already full.....and my mechanic thinks I already deactivated the dpf, but I'm not sure I'll post my file here
![[Image: image.png]](https://i.ibb.co/gm2FLqg/image.png)
![[Image: image.png]](https://i.ibb.co/4dxp6dB/image.png)
![[Image: mhh-jlr.jpg]](https://i.ibb.co/2SJVG8L/mhh-jlr.jpg)
![[Image: mdzv58i.jpeg]](https://i.hizliresim.com/mdzv58i.jpeg)