I purchased some aftermarket OLED (Chinese) plug and play tail lights for my 2016 Mercedes S 550 Coupe (C217). The lights work fine, but I get errors on the dashboard indicating the Left and Right turn signals are out (they are not out). I want to code out the errors.
Hi,
I have the error B142A in an airbag module (0285013742). It's a Mercedes X-Class. Can someone help to clear it, please?
I tried a cleared fille but then I have B00A000 (Weight sensing system error) or with another file U214087 (CAN error with DME)
hi there
is anybody who can help in read out by boot mode vag group 1.2tfsi engine ecu simos 10.11 ??
I have foxflash also k tag clone however k tag does not have even that option to do it by boot mode foxflash has but unfortunately it does not work......
thanks in advance
Hi mate, what procedure is needed to code the remote control of this car and that I can only start it with the closing button method with the 4-digit pin code in diagnosis it asks me for an 8-digit code to code does anyone have experience with this car thanks and greetings
I have a friend with a 2015 Sprinter 2.1L CDI BlueTec EDC17CP57. He got the dreaded 10 starts message.
I used the Tunezilla Pro from Malone to read the ECU and get him a tune to delete the troublesome emissions.
I still have the dreaded 10 start message. It is not counting down on each start however all the MIL emission warning lights are still on.
Malone tells me I need to clear them with the dealer software since the DTCs are stored in a different area of the ECM.
What software do I need to clear these? Will a Nexiq be compatible?
Hi , how can I read/write Seat Ibiza CGPA 1.2 mpi 03E906019E Simos 11.1 5WA11007 ? I got Kess v2 / Ktag clone, KT200II, Pcmflash/Scanmatik clone, Mpps v21 I tried to read it with PCMflash (57 VAG 1.2) mpi). It loaded the ID but failed when reading it. Can I use Kess obd protocol 384?
I have some EPS modules used in Jeep RENEGADE/COMPASS and FIAT TORO (South America) These modules are causing a lot of problems with water infiltration and in some cases test failure not in the battery, causing these modules to stop communicating .
Within these modules there are 2 differences, one of them the XC2361E-136F seems to be write-protected.
Has anyone studied this acceleration? Is there a solution for this? Please, if you prefer, call me in PV.
After too many attemps to make a good pop, reflash by OBD is not working anymore. I am pretty much sure i have reach the limit of operations.
I still can work by bench but i didn't found an ori file which can save me from this nightmare to make car operational again (don't start)... If someone can help it will be wonderful. Working with Autotuner, i join on attachment the ORI VR, the last file write before problem and the first read by bench after crash.
1.Original flash file for Iveco Stralis 2012 E5, so I can flash back to ECU.
Now SCR and ADBLUE is taken out, but I need it back...(Too hefty fines from police in this country)
2. I have KESS and KTag. Can I do it with one of these?
Hi everyone, who can help me with an egr off and stage 1 for this car? I've never done them, I don't understand what logic is used for these ecu....another question, if I write with mpps do I risk losing the injector code? thanks to those who help me!!!
Is anyone can help me with the ecu msv90 from bmw f10 , original ecu was water damaged and couldn' t read anymore, I get new ecu and need to write the isn readed from the original key
here in attached files the msv90 readed with kess 3
Hello, can anyone help me with setting this thing up? I have pre face-lift W204 classic (small display) with non-xenon headlights and with halogens, but without led drl. I'd like to make low beam lights to turn on automatically after engine is started, and they should stay on no matter if it's day or night. Can't find anything on the forums. I have working xentry and vediamo with operport.
Flash was damaged while trying service mode on VVDI2
Dashboard is dead can be identified with obd
Read with xprog attached you have flash and ori eeprom
hello
i must to change the vin because some one have stolen dash serie
i find new dash
i would change the vin please
thank in advnce
new vin WBAUF31060xxxxxxx
