Hi guys,

I have European Mondeo Mk3 from 2006. 125bhp, 1.8L Petrol with LPG installation.

I love my car, but it doesn't love me at all...

Fuel consumption is high. When engine works on low revs (idle) it shakes the whole car like mad. Very often when I am slowing down or taking gear out to stop, engine revs are falling so much that it almost kills engine (needle goes to 200x-300x revs, battery icon pops up) Immediately after engine on it's own revs back to 1100x - 1200x (to re compensate?)

Looks like Misfire and my OBD2 with Torque-BHP software showed to me today "392 Total Misfire Count" after 10 min drive! My mechanic is not really convinced.

I have changes spark plugs and i have new leads. What except of coil can cause such a problems ?

Also, I need to mention that ODB2 showed 115C degrees on Cylinder Head Temperature after few minutes drive...

MAF sensor on this ODB2 doesn't show... I wonder if MAF is faulty or my software doesn't see it ?

There is many other issues with it but all insignificant. I need to solve this as it's close to un-dvirable and count on your expertise.

Automotive Entry Tool Usage & Instruction Booklet

http://speedy.sh/mvKGk/Automotive-Entry-...ooklet.pdf

[undefined=undefined]

Attached Files

Thumbnail(s)
   

hi all,

Here for all members to link ECM Titanium for 32-bit OS with quick user guide.
the link is operative to 2 months.

no pwd.

Attached Files

ECM Titanium 4 free_OS_32bits .txt

2293

27 bytes

Download

I have install renault dialogys 4.8 but the dvd 2 is a small problem...


http://www.hostingpics.net/viewer.php?id...logys1.png

I have standalone native install on dell 6420. It was working fine until today. I got this message. any time i try to run application im getting error can any one help me how to fix it.

Attached Files

Thumbnail(s)
       

Hi,I need citroen c3 2009-20012 eeprom dump airbag autoliv 620674300
9676209280
Thanks.

Hi folks,
I'm looking for Engine simulator with real components.

I found one here: http://www.atechtraining.com/
The prices are very high.

Any suggestion would be highly appreciated.

Thanks in advance

Hey

Can anyone volta sensor 1.3 ?
i need volta crack

thanks

Gery

Renault Clip v127 (03.2013)
By kos9979


This is 03.2013 Version of Renault Clip.
Size: 2.80 GB.

Regards

Attached Files

Renault Clip 127.zip

718

14.46 KB

Download

Hello mates,

can someone tell me if this a good hot fix file is ?

already thanks

Attached Files

03G906016HP ori+hotfix.rar

37

504.55 KB

Download

0281 010 111,1037 35 2565

Service manual for Subaru Impreza WRX STI 2008 year production.
P.S. Any commercial use of the rest of this manual is strictly forbidden!

Attached Files

1.txt

253

32 bytes

Download

hi can some one please tell me if this vcm modual is any good thank

CL0402X0089692 please code thank you

hi ppl i need some help please i have mazda ids v83 ive installed it but when i use it it crashes comes up with erro testman can some please help i have a clone ids

hi

I want an update for my 2012 or 2013 kts200
thank you in advance

Hi!
Somebody have solution for unlock this navi system?
Thanx!!

Hi my van is 2008 Toyota KDH 201 3.0L MIL Lamp on got code P2002- DPF below efficiency threshold,Plugged dpf filter


Hi friends. I got 3 problems here please be kind to advice me! Please tell me how to fool dpf monitoring system without removing the dpf filter.dpf pressure sensor has 3 hose's can i connect two hose's together?will it disable dpf monitoring. if it works this trick may valid for fooling any dpf system.



There is a pressure sensor to monitor clogged up dpf filter just like the p.sensor for egr flow checking.I know few tech's are doing this in my area.somebody in Mhh Auto world knows this trick please share the dpf fooling trick thanks in advance.

Hey guy's do u know any technical forums about kdh hiace vans i had no luck finding one.

Also need abs tips-when we got wss(wheel speed sensor) code,we might get wrong wss code(eg;FL,FR,RL,RR).in order to verify that can i yank working side wss then if get correct corresponding code so original wss code is valid or is it?.can i also do wss swap test to find wiring,tone wheel or frustrating wss circuit faults, without using special mcro amp probe what are the tips we can share?thanks for reading.

i need oryginal flash file from 8D0 920 900H (2J74Y)

Hi all. can someone point me a IBAC generator??

Hi,
Use the DAS 11.2012 and seeking function.dll, csdsmart.dll for Smart Softouch!
Always have the problem that the TAN is incorrect...
Hope you can help me!


Best Regards
Michael

Dear members....

How to download catalogue from other sites with out torrent file?,
Its payable or not?

pLease give me the details.



thanks

So anyone who has original bdm full read would be most welcome. Needed to rescue
My ecu back to life.
MJP

Electronic parts catalog Hyundai.

Quote:Installation:
After installation is complete abandon reboot.
If installed in the default location, you can just run the file "run crack.cmd" from the folder "Lekarstvo".
otherwise:
Mg16.dll replace the original file in the folder "MCHYW" the one who is in the hand (the folder "Lekarstvo").
File with the same name to be uninstalled from the folder "Windows \ system32".
Reboot and use!

Learn how to update the program and the opening of all regions

For those wishing to see all regions in the installed program:
If installed in the default location, you can just run the file "run hywc.cmd" from the folder "Lekarstvo".
Otherwise:
Take the file "HYWc.dat" from the folder "Lekarstvo" and replaces the original file in the folder with the data "X: \ HYW_Data".
(For those who want to open yourself to all the installed program: in the folder with the data "X: \ HYW_Data" is a file hywc.dat. Open this file in any version of Excel, it opens as a table.
Clear the entire contents of three columns: ToYear, ProductionTo, ExcludedCountries, of course, except the column headers. Exit from Excel and save the file. A warning about what to save the file in this format is dangerous and you may lose some data - say yes.)
Update everyone can make yourself:
1 - Run the program.
2 - Enter the username and password (if you go first, then create a user in the menu "Administration" - lower left button pop-up authorization).
3 - Choose any brand and close the pop-up "Vehicle identification".
4 - Select the top menu "Help" - "Update data".
5 - If it finds a new, go to the site on the link, enter the password "Microcat", download the update.
6 - Install and re-organize the treatment process.
Done!
Do not forget - after the update must again go through the procedure of treatment!

00-HM0102.txt

178

3.66 KB

Download

I am trying to read my Siemens PPD 1.2 ECU (03G906018DT) with MPPS v13.02 but I end up with a 55.5KB bin file, which reads "No read file has been encrypted".

Apparently, early versions of MPPS used to ignore this and read the ECU regardless, but newer versions honour the NO READ file.

Does anyone know of any workarounds? Will I have to use a different tool, or would it even be possible to write a downloaded original 03G906018DT file to my ECU and go from there?

Any help would be appreciated.

Hi guys

Can some one help

I using galletto 2

I would like to read edc 16 bosch ,but the adapter from china clone is got only 10 pins is that correct ?? I read manual and I need 12 pins

How to connect with my adapter ??

Hello,

attached the new Galletto software on uploaded.to and the FTDI Eeprom readout..

The software and the FTDI Eeprom is from an EU Clone not china..

Maybe it helps some user here..

best regards

Attached Files

Thumbnail(s)
                           

read ftdi updated.rar

747

240 bytes

Download

GallettoV2_Novembar_2012.txt

842

21 bytes

Download

Galletto NEW UPDATE.EPT.rar

708

732 bytes

Download

I've uploaded it on usenet.
Filename: TopGearS19E04
Quality: Full HD (1980x1080)
Sound: Dolby ProLogic II Movie
Group: alt.binaries.hdtv.x264
Repairblocks: included
Status: done

If you like this please press the thanks buttonFing32

Renault CAN-Clip Version 126 FULL Multilanguage