I have an Acer Laptop onwhich I have installed DAS/Xentry 11.2012. The software works fine with the C3 I have, but now I have a different problem.
I also have a Honda HDS/HIM which works fine if I install the HDS software on another laptop. However, when I install it on the Acer Laptop, there seems to be a problem since it will not recognize the HIM. I am guessing that DAS/Xentry started a whole bunch of processes during Startup, which is causing a COM port problem with the HDS.
I ran MSconfig and attached a PDF file with all the processes at Startup. Can anyone tells me which processes are related to DAS/Xentry?
Installation: 1. Start PC_SETUP.EXE 2. Enter the code (if required) - epc984bc60 3. After installation is complete, unzip the file and copy the Parts Catalog.rar folder Parts Catalog (which has been in the game) in C:\Program Files\EPC\ or C:\Program Files(x86)\EPC\, replace all that asks to replace Windows. 4. Create a shortcut at the desktop to the file EPCSYSTEM_PC.exe which is in the folder Parts Catalog, it will be your work program. 5. Run the program. Select any model. If the program reports that the database is not found - it means you are not there to copy the data. 6. In your dop collected libraries and support files that are required for the program after starting. Extras. Information : Vehicle Model Code Y01: REXTON / REXTON W A04: Rodius (Stavic) J93: MUSSO J02: MUSSO SPORTS C05: ACTYON Q06: ACTYON SPORTS L95: ISTANA P97: CHAIRMAN W08: CHAIRMAN W D05: KYRON R96: KORANDO T10: KORANDO C (C200) / NEW ACTYON Q12: ACTYON SPORTS 2- A13: RODIUS-2
Need help with installation of AutoCom 2012.3. When I try to activate via USB-stick I get this message:
Failed to prepare the usb stick. You must use the "manual mode" or try again
But "manual mode" dont work either. Nothing happens after I click save and choose directory
Tried both NTFS and FAT format on the stick. Still no fileactivation.xml is created
I had until yesterday on my Samsung Tablet with Win7 x64 the 2011.3 Version and all was perfect. But I see here the keygen and download it incl. the software 2012.3
I installed it and patch it and activate it with keygen: "unknown error during unit"..
ok.. than i have format the PC, and first install Autocom 2012/3..
was ok, and then I get a firmware update, ok..
then I tried on the car.. ok..
and the next start I get error: "failed to load vehicle selection.."
and then formatted it again and install all on the pc, and last the autocom.. but after patch and activation came directly "unknown error during unit"..
and i formatted it now again.. first autocom, and then all the other shit i need.. first time use was okay, and now you can look in the attached screenshot....
If I delete the Autocom Folder in C:\Program Data, he says again "unknown error during unit"...
Please help me..
I'll go crazyyy.. I will no longer format-install-format-install..
What I'm doing wrong??
Help me anyone..
PS: I never had internet connection..
Thx
Solved....
Attached the solution..
You have to copy it in the Autocom installation folder..
And then delete the Autocom folder in C:\Program Data..
Year / Date of Release: 2013
Version: 2.1.2013
Developer: SsangYong pro
Site Developer: www.ssangyong.pro
Language: English
Medicine: Present
Description: Electronic Catalogue of spare parts for cars SsangYong own assembly c updated database of 2013.,
the program appeared ACTYON SPORTS-2, REXTON W, ISTANA, RODIUS-2.
Functionality of the program has changed from the previous version, vin-code their way, but do not cut off the number of spare parts,
but you can look to the vehicle on the basis of this information to find the right part numbers.
To punch VIN select the car model, choose Vechicle Info (M) -> VIN Number-> enter the last 6 digits of the VIN-code
attention VIN-codes starting with the letters "X" and "Z" are not punched, look in the documents for the car VIN-code that begins with the letter "K").
Quote:Installation:
1. Start PC_SETUP.EXE
2. Enter the code (if required) - epc984bc60
3. After installation is complete, unzip the file and copy the Parts Catalog.rar folder Parts Catalog (which has been in the game) in the
C: \ Program Files \ EPC \ or C: \ Program Files (x86) \ EPC \, replace all that asks to replace Windows.
4. Create a shortcut at the desktop to the file EPCSYSTEM_PC.exe which is in the folder Parts Catalog, it will be your work program.
5. Run the program. Select any model. If the program reports that the database is not found - it means you are not there to copy the data.
6. In your dop collected libraries and support files that are required for the program after launch.
Vehicle Model Code
Y01: REXTON / REXTON W
A04: RODIUS (STAVIC)
J93: MUSSO
J02: MUSSO SPORTS
C05: ACTYON
Q06: ACTYON SPORTS
L95: ISTANA
P97: CHAIRMAN
W08: CHAIRMAN W
D05: KYRON
R96: KORANDO
T10: KORANDO C (C200) / NEW ACTYON
Q12: ACTYON SPORTS-2
A13: RODIUS-2
WARNING for those who have a previous version should not need to run the installer again, just replace FOLDER "Parts Catalog" and all!
The Global Diagnostic System (GDS) is the only OEM diagnostic tool for Kia. It is an advanced service system that provides comprehensive coverage for all Kia vehicles including all Hybrid models. GDS provides complete diagnostics, analysis and reprogramming capabilities as well as a huge library of technical, service and repair information.
Features:
* Completely Integrated Diagnostic System with User Specific
Information & Settings
* Complete Technical Service Information
* Comprehensive & Customized Diagnostic Solution
* Guided Troubleshooting Procedures
* Mobile Data-recording Function
* Real-time Software Management
Year / Date of Release: 2012
Version: E-K-03-05-0000
System Requirements: Win XP - ....
Language: Multilingual
License: Freeware
Description: New dealer database with the diagnosis GDS KIA, October 2012
Extras. Information: Installation over of version EK-03-03-0000
All Disc For First Installation Presents
mercedes start error .. hello friends I have my mercedes that will not start the engine. the key is recognized by the engine ECU because in it I have no key errors. any help is appreciated.
year 2003
engine 612963
vin: wdc1631131a455538
thanks in advance ..
Hi,
New here and to diagnostics. I hope this is the right area to post.
Is there a special tool to remove pins from a Ford ECU plug. I assume the must be somthing better than a small screw driver and where to get such an item. thanks
Nissan Xanavi DVD X6.0 Sat Nav 2012-2013 | 7.40 GB
LATEST 2012-2013 UK-IRELAND & Europe - Nissan Xanavi X6.0 Sat Nav DVD v.2012
JUST RELEASED LATEST 2012 EDITION. This DVD is version Xanavi X6 and contains map data for Europe.
Please double check your previous disc to ensure this is the correct product for your system. The Xanavi X6.0 and X7.0 are separate systems.
From the wilderness of Scotland to the French Rivera and from the fiords of Norway to the tip of Italy, make this a map update from NAVTEQ the ultimate driving companion. You can reassuringly cruise across the breathtaking and diverse countryside, or simply navigate your way around the assorted mixture of towns and cities.
TMC available in Belgium, Netherlands, Luxembourg, France, Monaco, Germany, Italy, Spain, Sweden, Denmark, Norway, Austria and Switzerland
It is compatible with the following Nissan cars:
- NISSAN 350z Roadster 2003-2005
- NISSAN Almera 2004-2010
- NISSAN Murano 2005- 2006
- NISSAN Pathfinder 2002-2004
- NISSAN Patrol 2002- 2005
- NISSAN Primera 2003- 2010
- NISSAN Tino 2004- 2010
- NISSAN Xtrail 2003- 2005
Coverage details:
This DVD is your navigation partner of choice whilst driving in Europe for either business or pleasure. TMC available in Belgium, Netherlands, Luxembourg, France, Monaco, Germany, Italy, Spain, Sweden, Denmark, Norway, Austria and Switzerland
Installation for this disc is just a simple case of removing your old disc and inserting the new, your firmware will auto update and takes just a few minutes, once complete you will have the most upto date map and poi data base.
WHY UPDATE?
If your sat nav navigation is more then a year old it may be time to update. If you decide to buy the new Nissan Navigation Update on DVD you will benefit from not only all the latest changes to the road network since you last updated, but also thousands of Points of Interest files (POIs) which offer you interesting and useful places to visit on your journey.
The POIs are updated with each new release of the Nissan GPS Update Disc and include items such as ATM locations, business addresses, shopping malls, hospitals, restaurants, and tourist attractions – all of which can be navigated to at the touch of a button. The POI database is fully searchable and you can find an item whilst on route as the Nissan GPS will display all the destinations that are nearest to your current location.
If somebody missed it tonigh I've uploaded it on usenet.
Quality: Full HD (1980x1080)
Sound: Dolby ProLogic II Movie
Group: alt.binaries.hdtv.x264
Repairblocks: 2573
Status: done
If you like this a simple thank you would be great!
Hi,
I have make a firmware Update for a SDconnect. After that I get the error (1.18) -9890.
Does anyone know this error?
It comes in 09/2012 and in 11/2012.
In 07/2012 I get not this error. This Version runs without error.
What is the file Update2536_CeasarEngine090.zip in the Toolkit Update Folder?
For 3 months, I have pb with my clio 2 Phase 1 (MRE1002EH037).
When it is cold it stalls. Renault told me the ECU (see pic 1) was not sending any signal to the slow motion valve .. so i think a power component is dead in the ECU.
I bought a new but used one and of course now I have a immo pb.
So I would like to reset it and compiling what I read in different forums, it seems to me three approachs/solutions are possible :
1) To use a TMS374 ECU decoder to attack the pins of the ECU and
try to reset it. Does somebody have a true experience/skill with that ?
Which one to choose ? Packaging seems the same but prices not !
2) To use a software (aka immo LT 2 ?) but could I plug my PC
running the soft on the plug (see pic 2) of y clio of 1999 (without obd2 ?).vIf you can point the good cable ... thanks by advance !
3) To install the old eprom in the new ecu ... trying to put the
old soft in the new ECU which have an operational power stage for
driving the valve.
Well, as you see .. many questions and few answers :-(
Hope that some of you could help.
Thanks by advance .