Hi guys hope some one can help me.
i have a holden barina(corsa c)z14xep the ecu failed .I got a blanked ecu from the uk justed needs programing to the car ,i was qouted 600 dollas for the job.
Being a ford master ttech i decided i was going to program it my self
so i bought a tech 2 from ebay and was told it was genuine withe holden software143,000 when it came it was clear it was a hong kong copy.i went to the car to try and program it but it said i need authority from tis .so i loaded(copyof tis approx2004) on to my p c windows xp service pack2 it loaded fin but when i when to the security section access denied,so i contacted the seller who took 2weeks to send me a old copy of tis this just locks my pc up
i did some reading and thought i might need a dongle so i bought one but it was for the usa and didnt workso i bought another card which also came for usa cars.with frustration i updated the software on tech 2 to one on tis this wiped loads of stuff off the card so im now stuck and have read on here agreat forum of which i stummbled across that tis global might help ,i dont no just have a broken car 2 faulty tis cards and a dongle and tech 2 i can not use (also the buyer wont talk to me lol) so any or suggestions would be great thank you all
I got ISTA 2.28 in VMWare. It will connect to the car and read fault codes fine, but when it comes to Test Plans, wiring diagrams and Service info, I get blank screens that say "NO TEXT" and pop-ups that state: SVG fault.
Need really help on this one, my Lexia 3 Actia died i belive, it use to work fine till last week, i tried to connect it to c8 but nothing happened, windows can see it, i can downgreade and update firmware on it, what i spot is that it always click or relays when scanning car, but now ther is no click or soever, i tried to install fresh windows and all other stuff and nothing. Any advice Scary01? should i check any compassors fuse or something in it?
hellow all MHH members
in attached files you find the x-progM updated
read new chips . read new motorolla ... work whith X-prog clone and original not internet update just install the file .exe and her we go
The password will be sent in PM to every member if he click thank's button . so Don't send me any PM
1. Install XPROG-BOX 5.3.5
2. Copy and overwrite "xprog-m.cfg" file to c:\program files\ELDB\Software\XProgDesktop\
2. Connect XPROG-m to PC.
3. Start XPROG-BOX 5.3.5 software.
4. Click "Update" button, then click "Update firmware" button.
5. Run Xprog-m 5.0
6. Enjoy
here a video how to use xprog 5.0 xhith xprog 5.3 http://youtu.be/FilKOFJ9yDo
any question post reply!!!!
BEST REGARDS wahye
I need all or as many as you have of these archives. Can anyone up the files pls.
B performance data
D spare parts for diesel engines
E spare parts for electric system
K Diesel engines
K Starters and generators
KTS5XX/650, brake system
KTS5XX/650, management of the engine, gasoline
KTS5XX/650, management of the engine, diesel
M mechanical part
P schemes of electric connections
Sis, brake system
Sis, management of the engine, gasoline
Sis, management of the engine, diesel
TD technical specifications
W control parameters of fuel pumps of diesel engines
Data on service
Expansion of edition SIS
Testing the engine CompacSys
Structure of complete set Bosch ESI tronic 2012 Full:
Bosch DVD 1 Diagnosis and Technics
A Automotive Equipment
C, C1, C2 Vehicle diagnosis and SIS Troubleshooting instructions
D, D1, D2: Service parts: Diesel
E, E1, E2: Service parts: Electric
F: Spare parts archive
K, KA: Components repair instructions
M: Vehicle mechanics
P: Wiring diagrams
W, WA: Diesel test specification
Bosch DVD 2 Service and Maintence
A Automotive Equipment
B Works Units
C Vehicle diagnosis and SIS Troubleshooting instructions
M Vehicle mechanics
S Automotive Service
TD Tecdoc Data
i have a problem , i have installed the stardiag 11/2012 downloaded by torrent, i have find several guides and download newguide2i
everything works but when i start a diag from xentry , i have the error CAL 872 , i have find the cal 872 fix , and i have try all variable ( 2D, E , W ... ) , only the W works one time but after restart that doesnt work again
do you a solutions ?
i have 2 Dell D630 with one have a multiplexer original mercedes C3 and one a clone of C3 multiplexer
hello i need to read bdm seat leon 170cv whit ecu siemens ppd1 and dont have needle to conect. i need pin out bdm port.and other cuestion to read inmo pin code seat leon 2 2008? thank you
I'm hoping somebody can point me in the right direction and tell me what I should try next.
I bought a C3 star system from China with an external HDD that I was going to use on a laptop running XP Pro, I was going to use their suggested way of running through VMware with a external USB to serial adapter.
The software on the external HDD fails to load Xentry, even when copied directly to the hard drive. The VM instantly goes to an black screen with the following error message and doesn't even get to load Xentry:
ERR Code=x000000016, Line=00000450_
I have tried using a new install of VMware and also tried the whole thing on another laptop with XP and also one using Windows 7 (with VMware running in XP compatibility mode). All produce the same error result.
I am thinking some files on the supplied external HDD are corrupted and the VM is not booting up past BIOS. I have asked the seller to make available a new copy of all the software on the HDD so I can download it and try again. They seem unable to do this because it is 47GB, even though I suggested they use torrent. They want me to pay for a new HDD to be shipped over.
Would I be right in assuming it is best to try a fresh install of the software? And is there a download available on this site I could try? I have responded to a thread I found yesterday which appeared to offer the software via rapidshare but I was denied access. I have tried to find for myself, but would really appreciate any advice or a nudge in the right direction what I should try next.
I have used pais 4 for a long time without any problems . But now it seems that it stopped working . When i search parts it crashes ( APPCRASH ) and the reason is IMAGEPLUGIN .
I can´t find any information how to fix it .
Can anyone help me ? Thank you
may anyone can help me. I have ISK from Clip but when I write ISK to Renault Pin Extractor i get info "Invalid ISK code". I don't know what I'm doing wrong. May someone can generate PIN from ISK for me.
My car: Megane II Ph II 2006 1.9 dCi
Hi, everybody, i am a new member and i need some help/advice from the local forum members, please. I recently purchased a tacho pro kit to set the mileage on a new dash cluster for my car (2005 chevrolet impala), but dont seem to figure out how to get it to work. The car is in the supported cars list but not in the machine itself. I am mechanically inclined and not scared of soldering or whatever else is required, i already pulled the cluster out of the car, could you please guide me in the right direction in order to make it work, please. Thank you much in advance. Regards, Tony.
CarSim simulates the dynamic behavior of passenger cars, racecars, light trucks, and utility vehicles. CarSim animates simulated tests and outputs over 800 calculated variables to plot and analyze, or export to other software such as MATLAB, Excel, and optimization tools.
What If?
Use CarSim to design, develop, test and plan vehicle programs. Make better decisions involving vehicle dynamics, and spend less time. Use CarSim to prove initial concepts, select components, and perform advanced analysis of existing vehicles.
Easy to Use
With CarSim’s modern graphical user interface, you can run a simulated test, see an animation, or view engineering plots of results with just one mouse click. With the CarSim Quick Start Guide you will be making new runs and seeing their results in less than an hour.
Output plots and animations are obtained with a single button click. Besides being versatile and interactive analysis tools, the graphics they produce can be easily inserted into reports and PowerPoint presentations.
The CarSim math models are parametric, involving measurable properties that are commonly used by OEM's and supplier companies. (This is in contrast to esoteric multibody descriptions used in older simulation math models.) As a result, CarSim users can usually get results for new vehicles with minimal time.
Many Example Datasets and Animator Shapes
CarSim comes with over 15 vehicles: class A-F passenger cars, some vans, utility vehicls, and light trucks. There are many example test procedures, and over 20 3D vehicle shape files for quality animations. Each 3D vehicle shape is automatically resized as needed to match the dimensions set for the vehicle model, and the overall color can be reset at run time to help distinguish between overlays of vehicle from different simulated tests.
Accurate
The CarSim math models are built on decades of research in characterizing vehicles and reproducing their behavior with mathematical models. Validation testing continues as new features are added. OEM users consistently find close agreement between CarSim predictions and actual test results.
Extensible
The CarSim math models cover the complete vehicle system and its inputs from the driver, ground, and aerodynamics. The models are extensible using built-in VehicleSim commands, MATLAB/Simulink from the Mathworks, LabVIEW from National Instruments, and custom programs written in Visual Basic, C, MATLAB, and other languages. Use these options to add advanced controllers or extend the detail in subsystem or component models such as tires, brakes, powertrain, etc.
Fast
CarSim combines a complete vehicle math model with high computational speed. The software development team at Mechanical Simulation uses the VehicleSim Lisp symbolic multibody program to generate the equations for the vehicle math models. Besides providing correct nonlinear equations for fairly complicated models, the machine-generated equations are highly optimized to provide fast computation.
CarSim models typically run more than ten times faster than real time on a 3 GHz PC, so you always get results quickly. CarSim easily supports real-time (RT) testing with hardware in the loop (HIL) using systems from most RT suppliers. This speed also helps with software that requires many repetitions (optimization, design-of-experiments, etc.).
Cost Effective, Stable, Reliable
CarSim has all the tools you need to predict vehicle dynamics behavior in one integrated package, with the capability of working with other software to extend its capabilities even further. It combines the accuracy and validation resulting from decades of research in vehicle dynamics with the ease-of-use associated with modern video games and Internet browsers.
CarSim includes everything needed to simulate vehicle tests and view the results, yet it is priced at a fraction of the cost of other commercial vehicle dynamics software.
![[Image: 2rxijxh.jpg]](http://i45.tinypic.com/2rxijxh.jpg)
![[Image: 2qi8o6c.jpg]](http://i47.tinypic.com/2qi8o6c.jpg)
![[Image: 642108BEC.jpg]](http://k41.kn3.net/642108BEC.jpg)
![[Image: out.php?t=490260_isk.jpg]](http://fotoo.pl/show.php?img=490260_isk.jpg.html)
![[Image: 6ff14599c41a265d7409769e90510fb0.png]](http://i51.fastpic.ru/big/2013/0201/b0/6ff14599c41a265d7409769e90510fb0.png)