Hi. Tomorrow I have this ecu for dpf Egr off, is there someone who can contact me regarding this? Also have Marelli MJ8DF for the same. Need good file good tuner good prices. Thanks
Hello everyone! Please help me with the wiring diagram of the fuel pumps of the ECU. Maserati Levante 3.8. 2021. I am replacing the V8 engine.
The difference in the engine power system is that it has 2 fuel pumps in the tank. Initially, the car had a V6 engine with only one pump.
I have a Ford Ranger with ECU SID212EVO, car turn on AdBlue light and shows a message with no start in ---- km, I refill AdBlue, but lights continues on.
I try to remove SCR system in DCU, but I need first reset light. With Autel I can't do it.
Anybody knows what machine or software I need to do that?
I tried with pcm flash 1.21 but all I found was 1.4TSI and they didnt work, tried different version of module 48 and 71 and it gave error 2211. This is 1.4TFSI HY and there was nothing of it.
Thanks!
Hello, i'm looking for backup for this ecu, i got it bricked and need to repair. Crashed during writing on OBD. There is no communication via OBD anymore, JTAG doesn't communicate, propably locked. Attaching VR from guy who bricked it. The only way i can write is boot, but tool shows me wrong size (needs to be 2176kb)
ID by WinOLS: 320_A9787-BHL-AWS-EU-0081C-ECM-QYF34A00-170704
VAG FlashDaten - Database with VAG car firmware. This program contains firmware for engine control units of Volkswagen, Audi, Skoda, Seat, Bentley, cars. Firmware sorted by dates and brands.
FREE FOR EVERYONE!!! To receive the file, please send a message in PM after the THANK and REPUTATION mark!!
My car is a Skoda Kodiaq from 2019, still a pre-facelift model. The problem concerns the retrofitted camera 2Q0980653 (the old camera is 3QD980654A). After changing the camera from 3Q0 to 2Q0, the component protection was removed, a hack was performed and all SWAP codes were activated, appropriate coding and parameterization as well.
Everything works great when it works, but there is a problem of a returning CP error (in the camera) once every few starts of the car. This error of course causes deactivation of everything related to ACC. In order to continue to use the travel assistants normally, I have to turn off the car, turn off the ignition and wait a while, after restarting (sometimes two starts) the errors are gone and everything works again. I do not have to delete these errors via OBD, they are in memory but saved as intermittent and do not cause any further problems. The problem is definitely not in the camera itself because this is already the 3rd one and the problem still returns.
I have 3 original keys for the car, 2 of them were used in the CP deactivation procedure (for this and other cameras), one key remains, which my wife uses and which has never been used in the CP removal procedure. Now the most interesting thing, my wife drives the car every day with her key and she has never had this problem.
I have always deactivated component protection using a 10-minute GEKO account, so is it possible that the component protection removal procedure itself was corrupted using this solution?
I have no more ideas what could cause such problems, all possible modules, whether gateway or kessy, are updated to the latest software versions. I am uploading a scan from my car with errors after this fault occurred. If anyone has any suggestions, please share.
Hi can someone help me, i have lenovo x201 laptop and i install xentry passthru 12.2020 software and now starkey is incorret. What is pc time ,now time ks 01012020 ans expiration time 31012031, developer V1.1.0 Generat wrong starkey.
It is possible to do POPS&BANGS, but only for it to work with AC off, normally I have to move the KFNWLNM and LAMFA maps.
But can I add the AC OFF condition, or how to do it?
Hello,
I got a HDD from China with Xentry 12/2024 and Vediamo. Xentry run perfect, but Vediamo/ Ecoute doesn't find sd connect. Has anyone an idea. It runs on a panasonic CF-53. In my HP laptop I have the same Version of Vediamo and there the same sd connect runs. If I compare the ini it is all the same.
Hi guys, I need some help regarding a Jeep Grand Cherokee WK 2006 that I have in my workshop, I need to do a restore vehicle configuration, and as far as I know, it needs to be done online using a witech 2 suscription, the problem that I have at the moment is that I have a Micropod 2 clone, and a SM2 clone too, and don't know if one of them will work for the job I need to do.
