Selling WinOls database with projects stage 1/2/3, DPF, EGR, SRC AdBlue off.. Also working on cracked WinOls 4.7 Can send test file.
NextStage Tuning Database (EU) Size zip = 47GB All files are from Nextstagetuning.se PRICE 100€
24-7 ChipTuning Database (EU) Size unzipped = 488 GB Size zip = 94 GB All files are from 24-7chiptuningfiles.com PRICE 100€
Zip-Tuning Database (EU) Size 14.48GB All files are from ziptuning.com PRICE 50€
MHD tuning maps for turbo BMWs and the new Toyota Supra mk5. All the files were decrypted/reverse engineered from official MHD android app. Stage 1, 2 and some 2+ with different fuel combinations 91, 93, e30, e50 etc Maps come with the original bin and the tuner pro xdf or winols .kp for editing. List of available engines(can be checked also on MHD webpage). E Series N54 - MSD80/MSD81 E Series N55 - MEVD17.2.x F-G Series/B58 - MG1CS003 (extra: matching Damos included) F-G Series/B58tu1_m1 - MG1CS201 F-G Series/B58tu1_o1 - MG1CS201 F-G Series/N13 - MEVD17.2.5 F-G Series/N55(M2) - MEVD17.2.G F-G Series/fN55ewg - electronic wg - MEVD17.2.G (extra: matching Damos included) F-G Series/fN55pwg - pneumatic wg - MEVD17.2.x F-G Series/S55 f8x - MEVD17.2.G (extra: matching Damos included) F-G Series/S58 - MG1CS024 (extra: matching Damos included) F-G Series/S63tu0 - MEVD 17.2.H F-G Series/S63tu4 - MG1CS201
PRICE 100€
Hi guys! I have a R56 Mini with CAS issues. I've attached the fault codes and a read of the module and just want to know if it's a corrupt flash issue or if I should be swapping it out for another unit?
Any input much appreciated. Thanks!
Hey Guys, got a noob question to ask.
Can I read a main flash file from 2GR or 3GR ecu and write it onto a 4GR ecu? Will the car operate according to the 3GR/2GR map?
Ive tried 3GR main flash on a 4GR and car ran fine, would a 2GR flash do the same?
Hi, can any one help with immo off for this one? Tried solution from CarLabImmo it didn't work. Seems this ecu is bit newer different software.
SIMK 43 Hyundai Coupe 2007 5WY4402C 39102-23960
Or maybe someone can advise what's the common issue with BCM to affect engine starting. Is it just water damage, (as I found some in bcm, but very little only one small spot) or is it something else which fails commonly. Thanks.
Hello guys can someone help with lambda and sai delete please. Car not run okay... DTC's are : P1118, P1432, P1287, P1114 and P0140
A3 1.8T 180hp
Thank you!
Hello everyone I'm hoping someone has a way to unlock a used 5star tuning Ngauge. It's currently vin locked and I would like to use it on a different vehicle with my own .hpt tunes. I'm have the Lund racing ngauge unlock file but from what I have read it won't work for the hpt version. Any help would be appreciated.
Hello everyone
I need to disable the DPF and EGR of the car, but after I wrote the solution, the car starts for a second and then turns off
I found that this only happens when the area of the file related to DTCs is edited
Whatever I change, there is no problem
If I deactivate more than one fault code, the car starts only for 1 second and turns off again
I will attach the original file and both modified ones
I hope someone can help
Hi everyone, I'm wondering if anyone can help me diagnose my Nissan, but I don't know if it works with Autel, what version it works with, or if it requires a patch. Thanks in advance.
I’m friends with a small workshop that repairs all brands and offers a wide range of services. This includes recoding and performing online programming.
Unfortunately, our last service provider is no longer active in this field after many years. I am looking for a reliable and long-term replacement.
If I only find someone who can carry out the coding or programming independently, that would also be fine for me. The best would be someone for Audi, VW, Skoda. Other brands are also welcome.
Hello everybody, i have problem. I programed 2016 gm express van transmission module via techline. Everything goes smoothly, fault code is gone after that, but after that I can't shift to drive, it's shifted but looks like it neutral , only rear gear is working.
I did adaptation via autel ,but still problem. Car was driving forward before I programmed , problem appear after I program module. Looks like module was programmed corrected , all green light. Anybody know what could be a problem? Thank you
The best way to do things right is to do them right from the start.
I've seen many cases worth documenting.
Poorly executed installations and contractors who disappear without offering reliable solutions. And you know why? Because they have no idea how to fix it.
The best advice I can give you is to make sure you're working with trustworthy and qualified people.
I love to help, but I hate it when people come to me just to fix something that someone unscrupulous tried to take advantage of, and even worse, when they undercut the market price to unsustainable prices.
Anyway, it's always a pleasure to help you, but know how to choose the right person to carry out your installations from the start. There are many qualified people here. Don't give money to someone who doesn't deserve it.
And to those who carry out the installations and then disappear, I only recommend that you do your research, inquire, and become experts in the subject; that way, you can offer a very good response and quality service to your clients.
Hello guys
Need get eeprom with good adaptation to w118 CLA35 Amg 2020y 7gear dct dual clutch TCU
I repaired eeprom with known program but it not work.
I have a fault
P092500 THE SHIFT VALVE OF THE HOLLOW SHAFT HAS A MALFUNCTION. THERE IS A GENERAL FAILURE.
I had same fault in w176 and fixed it in Block1 and works all well.
Regards and thank you
![[Image: Screenshot-20250325-223232-Chrome.jpg]](https://i.ibb.co/ZpWLmpVt/Screenshot-20250325-223232-Chrome.jpg)
