Hi!
Can someone help me with information, what number of ABS module goes to the car from the attachment?
The original module was removed from the vehicle and lost...
Mpr Reference: 283C29071R Supplier: CAP Vdiag Number: 59 Calibration Number: 0000 Electronic Version: HARDW00000 Vin Code: WOVMR860XMB251881 Program Number: 01000F00 Radio Programming Key: K993 Date Of Last After Sales Operation: 010101 Computer Serial Number: 181X0061-016907
Does anyone have full backup for VW Polo 6R 2012 cluster( Johnson Controls 1692135, WJ3-NVO26.09.1200010832 WJ3 6R0920 861K) with D70F3423GJ(A) + 95320?
Taking out the battery of my atlas i hit accidentally the ecu and fried it
I have some insights of electronics and programming so i want to learn all about it thats why i enter this page to learn and helps others
I dissamble the ecu and i measure the components some diodes are open circuit and some condesators are open
I need someone to guide me im able to pay of course, in the right direction, if i can clone my ecu or i can buy a new one or used one and reprogram ...... I'm ready to learn and with my car its a better bet ....
I am seriously interested in buying a pass-thru device. I am interested in the original Cardaq3Plus from DrewTechnologies. Is there anyone here who uses it and can confirm whether Cardaq will support clone software vida2014d, Vdash and online access to official Volvo-Vida?
I just need to be sure, thanks.
can you please check if the tuned file has been done properly with vmax off and secondary air pump off ?
Because customer told me the car won't go more than 143 km/h gps, same as before and therefore he doesn't believe me that something has been done.
Also willing to pay for for 100% solution for a stage 1 with 10 hp more and 20nm approx more, vmax off (100% solution) and also vmax off.
Hi.
Need help to change odometer VV Golf 5 Plus due the change of clocks
Part number is 1K0 920 862K VISTEON
I remove eeprom 95160 and read with VVDI ....dump atached
I need to change from 243xxxx km to 145 000 km
Thanks anticipated for any help and sugestion!
Ecu kubota denso, of manitou machine. I do with software DPF off and reset with tool, but allways appear about 2 hour working machine limp mode and dtc P3007.
Hi everyone,
I'm new here and I enjoy learning new things, especially about my car. I have a Škoda Octavia RS Mk2, year 2006, with a 2.0 TFSI 147kW engine.
I recently swapped my instrument cluster for a facelift version, and everything seemed to go smoothly. I installed cluster 1Z0920843C (SW0110, HWH21), but I noticed that I don’t have the oil temperature and similar readings. From what I’ve read and researched, it’s necessary to update the firmware in the cluster, and the maximum available version for these clusters is SW03xxx.
Can you advise me on how to download the original firmware from the cluster and where I could find a newer version of the software?
I really appreciate any help and ideas, and I believe this great forum will provide some useful advice.
Thanks a lot! 😊