Hi guys, i have a Mercedes S Class with TEMIC Unit, Reference A6281530579 and have a Cold start error. I heard that the ecu has repair.
Can anyone help me with this ECU?
Can anyone help me?
I want to read the Dash from T5. (Year 2008)
VDO V.03 is installed.
Always get the error "could not login"
But there is no lock time active.
Today I first tried to install BDM programmer, but without success.
When I join the BDM main unit, I can install a driver for Map3D OBDII Interface. After that, he asks me to install the USB serial port. I use the CD that came with my Programmer Interface
Can you give me some help?
Honda Satellite Navigation DVD v.3.52 (Eastern Europe)
List of countries on the disk: Austria, Bulgaria, Vatican City, Hungary, Denmark, Germany, Greece, Italy, Latvia, Liechtenstein, Lithuania, Norway, Poland, Romania, San Marino, Slovakia, Slovenia, Finland, Croatia, Czech Republic, Sweden, Switzerland Estonia
Compatible with:
Legend 2006 - 2010
Accord 2006 - 2011
CR-V 2007 - 2010
Civic 3dr 2006 - 2011
Civic 5dr 2006 - 2011
Civic 4dr (IMA) 2008 - 2011
CR-Z 2010 - 2011
Insight 2009 - 2011
Description:
2011 Honda Satellite Navigation DVD V3.52 (Eastern Europe)
Roads are continually changing - that's why, in the wake behind them, are constantly changing and our maps. Modern maps provide information about the optimal routes, new roads, reliable detour nearest petrol stations, hospitals, restaurants and other facilities.
Extras. Information:
Attention! This image should be recorded on DUAL LAYER DVD (DVD + R DL). In the next topic recommended to use disks Verbatim Double Layer (plus) DVD.
IMPORTANT: Change buktayp with DVD + R DL to DVD-ROM
For those with an error message after you insert the disk:
1.) Insert
2.) Wait for the error message.
3.) Log in the Diagnostics menu keys simultaneously holding down the Menu, Map and Back.
4.) Select Version, and click OK (click for a large joystick.)
5.) Select Download and press OK.
6.) Then wait for the download is complete (may take a few minutes), then the navigator will reboot. You can use it!
To all mhhauto members, I'll upload all the software from codecard (small programs section).
as I don't use none of this programs, all the tests were made with a couple of files, so if you find any problem while opening a file, just let me know and send me the file.
I'll start with Toyota 4d key tool and Volvo CEM Synch 1.4
Pass is mhhauto
Toyota : [attachment=29196]
Volvo CEM : [attachment=29194]
update:
Dash-EcuTeacher V1.8 : [attachment=29197]
Volvo S40/V50/C30 Synch with SID803 : [attachment=29192]
Komatsu Time V1.2 : [attachment=29193]
Ford Fiesta SIM210 v1.1 : [attachment=29195]
update:
Visteon 95320 v2.3 : [attachment=46279]
Visteon 95160 v2.3 : [attachment=46283]
Ford Transit Connect SID206 ECU synchronization utillity V1.1 : [attachment=46481]
Toyota hilux 3.0 D4D not starting showing crankshaft position sensor circuit malfunction code P0335.i have already Check the connection to crank sensor, and the wiring is good and connection is clean then i have replace the crank sensor ,how do i solve this...? by the way there another sensor in the pulley of injection pump
hello friends
I have ford transit 2004 , the car doesn't start and immo light is flashing.
I checked the keys its ok and tried to program the key again but it didn't work also.I don't have service manual for this car and i didn't work on these vans before. anyway I checked the immo module I found
1 pin +12v all time
1 pin +12v when the ignition key on the ON position
2 pins is ground
4 pin from the module to antina coil
1 pin for immo lamp
1 pin for starter relay
2 pin for 16 pin DLC
and still 2 pins I don't know where they go. so connector is consist of 14 pins
the van is diesel and I didn't find any PCM I don't know if these vans come without PCM please if you can help me make this van start I will be thankful is there anyway to cancel the immoblizer system? VIN is NM0NF25E54TA15635
thank you
hy i have problems with my xentry 9 2012 on new cars 2012 and above i dont have any development funcions like change voltage on control units or code new head lamps. on cars 2011 or 2010 everything works fine only new cars dont work.
anyone have an idea how to fix it ?
thanks so much
I would be gratefull if someone can help me find rev limiter to volvo s40 t4.
I manage to tune that file but i need help with rev limiter.
I'll post the .ori file decoded.
siemens sirius32
s108212205a
Hey guys.. doesnt anybody know of a odometer correction tool for gm and ford cars and trucks that can be used through the obd2 connector rather then removing chip from the boards?
. Thanks
