good day,
can anyone tell me how to program and read a bosh ME 7.3.1.
i used kwp 2000 and i can read ecu info but no reading of writing also in boot mode. the same goes for the galetto 2 master china clone.
on the galetto i used also the bench cable. and i can't figure out which cable color is the kline. i guess the yellow.
Is possible that new registred user to write only in this treath/Introduce Yourself/ for first time?They can see other treaths but not write answer or else?M-r ToMiBoY have a lot of work this days?Will be easy for all members to make first step then go forward in the deep...
I have recently had someone ask me what Rolls Royce models will work with the BMW Icom software. I couldnt seem to find an answer to this and was wondering if anyone knew the answer.
I would assume that all models since BMW bought out RR, but just wanted to check.
every one can help me
x6 e71 n55 2010 with fault code
36C9 DME, internal fault, safety function: Plausibility check, relative fuel mass
5F77 DSC: Engine management: interface
CF80 Signal from engine management: setpoint-torque request
i replace high pressure pump already. check line between DME and rail pressure sensor.value show in rail ok.power supply dme ok.but fault still occur when running at over 80km/h
I've follow instructions pdf from the board for Peugeot Doc & Sedre 11.2012 on a new install of XP SP2.
My key come from the board.
I've a problem with the last step :
Now copy - paste the "infos" file from Peugeot +20 Years Working folder in: C:\Program Files\DocBackupAP\Resources ...
I don't find this folder or file on my 3 DVDs.
The infos file to modify is avaibable in C:\Program Files\DocBackupAP\Resources
I am trying to help out a friend reinstall the Cat SIS software on a new pc because his old laptop crashed. He has the SIS 2012 (or 2011b from what I've read here) install and data discs. (16 total)
How do I go about installing and activating this for him? From other posts I've read here it seems that I will need to install 2011a first because it has a working keygen, then upgrade to sis 2012.
I can't seem to find any working links to obtain the 2011a discs. Is there another way to get this working that I am unaware of? or can one of you point me to where I can download the discs?
Year : 2003 Genre : The Complete Guide to operation, maintenance and repair Developer : Lancia Automobiles SpA Language : English, German, and several European Quality : eBook Description : Lancia Ypsilon eLearn - maintenance manual car for service centers. On the drive there schemes of all units of the automobile, electrical wiring, procedures for the removal / installation of individual components. To install the software you need to mount as a virtual drive. Extras. Information : Lancia Ypsilon from 2003 to the present, in place Lancia Y . In 2007 Lancia Ypsilon was subjected to modernization.
Hi, i have a 2003 Subaru Impreza WRX with the 2.0 turbo engine.
I will be needing a GOOD tuned file for this car, even if it costs money.
the car does have some modifications such as, a full exhaust system, induction kit and turbo dump valve.
i have mpps but i am sure this car is not supported, however i will be using the subaru wire mod and an obdii cable and ECU FLASHER software to read the original file and write the new file.
If you can tune this car well, please post on here or pm me!
Year : 2007 Version : Windows Compatibility with Vista : unknown Language : English + : Not required Description : eLearn FIAT BRAVO 198 - maintenance manual for the car service centers on the disc: the scheme of all units of the automobile, electrical , the procedures for the removal / installation of individual components
Hi, i have a 2003 Subaru Impreza WRX with the 2.0 turbo engine.
I will be needing a GOOD tuned file for this car, even if it costs money.
the car does have some modifications such as, a full exhaust system, induction kit and turbo dump valve.
i have mpps but i am sure this car is not supported, however i will be using the subaru wire mod and an obdii cable and ECU FLASHER software to read the original file and write the new file.
If you can tune this car well, please post on here or pm me!
Hello, I'lm looking for some technical data about engine in this car. There is nothing in Bosch esi tronic and vivid workshopdata. Do you know any software with information about this car/engine?
Hi to all member
Here is one usefull program with patch and interface
I use it and is very good
Here is some info from official site
NavCoder is a Windows application to reprogram BMW navigation computers and other ibus devices.
With NavCoder you can...
View the ibus data in real time and in plain text! 90% of all ibus messages can be displayed in English.
Scan the ibus and retrieve information on every connected device
Scan and retrieve service information, showing vehicle kms and last service data
Code the Light Control Module and switch off light bulb warning messages (great if you are fitting LED lights) as well as code Daytime Running Lamps (DRL)
Code the Navigation computer (Mk2, Mk3 or Mk4) and set any setting you like. You can load languages, change from Mono to Colour nav or vice versa, adjust split screen mode, and change regional settings. Everything!
Code the TV and enable TV-in-Motion, change backup camera from NTSC to PAL and more
Code the ULF and TCU Bluetooth Telephone modules, enable voice recognition, and adjust speed dependent volume
Sync the car clock to your laptop clock to the second
Test the PDC, showing each sensor working in real time, with distance to obstruction
Save and read ibus log files to help in analysing the ibus data flow through the vehicle. Handy for fault finding
And lots more...
Read and Code Navigation
Read the current coding and setup your navigation the way you want.
Change the boot mode from Mono (as used in E46 mono navs) to colour-screen navs (as used almost everywhere).
You can also set the languages to any combination you want, and recode the nav for another vehicle (useful if you are selling second-hand navigation units). Note: loading an OS and loading new languages requires a BMW OS disk. They can be found on the web...
Read and Code TV
The very popular "TV in motion" setting is found here.
You can also set your backup camera to PAL or NTSC - something that the BMW diagnostic software cannot do!
Read and Code Radio
Change area, set RDS options, and more.
Read and Code ULF and TCU Telephone modules
Did you know that ULF modules from Coding Index 05 have voice recognition built in? Code it with NavCoder!
Easily send any message you onto the ibus with the Message Tester
You can also save 5 commands into 5 function buttons.
You can also enter any ibus command and decode it into plain text - very useful when developing ibus applications.
SUPPORTED PLATFORMS
NavCoder runs on the following platforms:
Windows 7
Windows Vista
Windows XP
Windows 2000
Windows 1998 (confirmation required after v2.6.0 due to additional OCX controls used)
Windows 95 (confirmation required after v2.6.0 due to additional OCX controls used)
NavCoder can be used in the following vehicles...
BMW 3-series E46 (1998-2007)
BMW 5-series E39 (1995-2004)
BMW 7-series E38 (1994-2001)
BMW X3 E83 (2004-current [expected to be produced until 2010])
BMW X5 E53 (1999-2006)
BMW Z4 E85 E86 (2002-2008)
BMW New Mini One and Cooper R50 (2001-2006)
BMW New Mini Convertible R52 (2005-2008)
BMW New Mini Cooper S R53 (2001-2006)
BMW Range Rover L30/L322 (1999-2003)
BMW Rover 75 R40 (1999-2005)
BMW MG ZT X10 / ZT-T X11 (2001-2005)
BMW Rolls Royce Phantom RR1 (2003-??)
The cabel for I-BUS is white / yellow with gray bars
I-Bus wiring throughout the car has many and you can chose where to switch the Interface
PM me for password ONLY if you have over 20 quality posts (not like - I want, please help me....) and you are not Junior Member on MHHAUTO and an active member!
Everybody else please don't ask for password for rar file!
Here is my archive for BMW Scanner V1.2.3 - V1.4.0 for DIY with Software and Hardware
I made the V1.3.6 a long time ago and work fine
PM me for password ONLY if you have over 20 quality posts (not like - I want, please help me....) and you are not Junior member on MHHAUTO and an active member!
Everybody else please don't ask for password for rar file!
Electronic parts catalog TecDoc 2Q 2013 base of spare parts and non-original accessories and OEM manufacturers for cars. TecDoc 2013 The catalog contains information on spare parts 15,500,000 300 European manufacturers (FEBI, BOGE, BOSCH, BREMI, CHAMPION, DAYCO (PUROLATOR), GATES, GOETZE MOTORENTEILE, QUINTON HAZELL, SACHS HANDEL, VALEO, VARTA, BOSAL, BREMBO, CENTRO and others). This catalog provides information on cars and trucks of all brands.
![[Image: 2rxijxh.jpg]](http://i45.tinypic.com/2rxijxh.jpg)
![[Image: 2qi8o6c.jpg]](http://i47.tinypic.com/2qi8o6c.jpg)
