I have one client with defected EWS3 from hardware side, the client ordered brand new EWS from the dealer, but they send EWS4, I beleive they stopped producing EWS3, is there any way to program this EWS4? I searched in the whole Internet, I didn`t find anything useful.
I have only VVDIProg with EWS3 and EWS4 adapter, I can also buy AK90 with EWS3 and EWS4 adapter if that will help, also INPA is available as well and Diagzone (Launch) application.
VW Tiguan 2019r 4x4
2.0 140KW
DSG gearbox
What oil for the gearbox?
What filter?
How often should it be changed?
Is there a procedure?
Thanks in advance for your help
Hello, I read the edc of a Peugeot to get the pin, it gave me this code KS3H. When I try to encode the keys, it gives me an invalid code. Can someone help me get the code to encode the keys?
ecu is sid 801a
vin
Hello
Can educate me or help get OTP code for 2018 mitsibutsi outlander
I am replacing ecu and tester asked me to enter OPT code to finish coding
How do I get this
Thanks in advance
Hello!
Can someone help me to modify my felicia 1.3mpi with 5wp4 326 ecu. And find some maps cus i have turbo on it and bigger 300cc injectors.
I have some maps but for me not works i modified max rom and tried to do lift off pops and bangs but no changes. I got some maps from other forum, but not works for me. I got this info from other forum but dont know other factors and offset for ignition maps. And the rev limiter not works.
The info:
“0x100DF - Rev Limiter, 8bit 1x1 (eg. decimal value 205 = 205*30 = 6150rpm) --> *30 is factor
0x1099C - RPM 1 Axis, 16bit 16x1
0x10AF8 - RPM 2 Axis, 16bit 16x1
0x10E64 - Bypass minimum, 8bit 6x1 (dont know much about this map)
0x111A2 - Spark advance at closed throttle, 8bit 8x3
0x11EAC - Spark advance at middle throttle, 8bit 16x16
0x121D8 - Injection (ext), 16bit 16x16
Hello, I have used Hitag 2 to make me a .bek file from a blank key, first time it wrote something to the key successfully and made me a bek file. now the thing is I don't have bmw explorer to write it to cas AND when I try again to write to the key it says that the transponder is not empty or something about the transponder. I have the different cas 3 editors but I don't know what to do with the bek file.
I will attach my cas and bek file maybe someone is willing to help me.
My understanding of the situation is that the transponder is write only one time then it's locked.
So I ask for help maybe to decode the bek file or give me an example of a bek file and the key to maybe reverse engineer the bek file and find the data that I need from it. Any help is really appreciated.
Good morning, I need to codify VRC218 The camera of the W176 pre on Comand Online NTG5.1 I put all the original telematic now I would now like a straight how to move for coding giving me some indications in the configuration of the calibration. You have the ready to share file.
[font="MHH Font", Calibri, sans-serif]Hello all.[/font] [font="MHH Font", Calibri, sans-serif]I am interested in measuring the clutch wear of a DSG gearboxes via the adaptation point values. Can you help me with the upper limit values of the adaptation points (the value when the clutch is wear and the gearbox goes to the alarm adaptation point reached) for DL501 (bar), Dl382 (bar), Dq250 (current mA), Dq381, dq500. Is it possible to measure the clutch wear with the adaptation point values?[/font] [font="MHH Font", Calibri, sans-serif]Thanks in advance. And sorry for my English language[/font][font="MHH Font", Calibri, sans-serif].[/font]
Hello guys, I really need help here.
It's a Dodge Nitro and I have replaced all the hardware that could be faulty but the P0743 is still in memory and I don't know but I think this could be fixed so I would be grateful if someone could help me.
Hello everyone
I buyed a used gearbox (powershift) for a volvo v40 1.6 diesel 2014, which the gearbox slips and behaves strange.
The used gearbox which I buyed, is complete with mechatronic.
My question is, can I put this new gearbox complete or need coding? If need coding, with which tool do i need to code? I have launch..
Thanks in advance
Hello,
can someone help me with a dpf off on a ford ka engine 1248 cc 55kw manual?
I already tried to install a software with dpf off but the error still remains on the cluster DPF cleaning keep the vehicle moving. on the ecu i have only two errors U1700 and U0422, not relating to the DPF. I am attaching the original sheet and the sheet with DPF off which did not work
Hey, I’ve got a Seat Exeo 2.0 TDI with a CAGA engine, but I’m running a CR170 (CAHA) turbo. It already had a stage 1 remap, but I just found out it was tuned for a CR143 turbo. I’ve pulled the files from the ECU and was hoping to get it properly redone for the CR170 turbo.
Hello friends, I need f10 f30 f15 headlight wiring diagrams and esys coding. If anyone has such a ready file, please contact me. For example, how to draw a cable to a non-adaptive car?
I have used WinOLS 2.24 for years on my Win 7 64 bit OS for years. Recently, I had to restore the hsrd drive and did a full reinstall of my Win 7 OS inclding SP1 and a bunch of Net Frameworks.
I installed Winols but it gets stuck and have had to force close it. When trying to create a new project, when i proceed to select the file, I get this error: "Error whole handling the file selection. The operation was cancelled."
I have used the same Winols installation files for years and never had any issues until now.
I have tried uninstalling/reinstalling the program 3 times but it does the same thing.
Does anyone know what can be going on, or what I am missing to get this working again?
hi good!
i need p160a00 OFF
is a edc17cp54 vr with flex, magicmotorsport.
the file is flash, only maps.
After writing this DTC started, everything is fine.
There is only this passive/sporadic DTC.
Hi. I did activate reverse camera in my car. Everything works great but camera is not working when radio is off. Is there any way to code unit so camera works when radio is off?
Thanks in advance for any information.
