hello guys can somebody help with reprogramming dme
I bought a car with ecology problems, and I fixed the scr ecology and I am sure that it should work well, but still there was something wrong and the problem of scr efficiency came out. And when I updated the level of integration of the car, the car told me that the engine shutdown scenario was launched about 16,000 miles ago, I drove the car only 3,000 miles, and then I realized that the car had DTC codes disabled (regarding SCR). I read the engine control unit k-tag, I have a file, I can disable (block/cut) the scr system but I want to bring it back to life without cutting, because I have already fixed everything and I am sure that everything should work, but my DME does not know this and therefore the car does not start because the shutdown scenario blocked the start, you can help with the removal
clean the firmware of the unit from errors associated with SCR
[font="MHH Font", Calibri, sans-serif]00474C SCR system, warning and deactivation scenario: Warning level 1[/font] [font="MHH Font", Calibri, sans-serif]004748 SCR system, warning and deactivation scenario: Warning stage 2[/font] [font="MHH Font", Calibri, sans-serif]004746 SCR system, warning and deactivation scenario: Warning state 3 (maximum range reached)[/font] [font="MHH Font", Calibri, sans-serif]004D08 SCR system, warning and deactivation scenario, Warning stage (maximu, range reached, no engine start possible)[/font]
only delete this code erroros(or all code erorrs)
without cut (blocking) the scr system.
hi
i have a daf xf with software PC4__1408P151F
i have a2l. file for other softwares for example :
PC4__1284P4C_6.A2L
someone can share a2l for my software ...i can share other a2l files
thanks
Hello, I am searching for someone who truly understands BRP Can-Am tuning. I have tried several tuners, but there is always something wrong… (very high fuel consumption, misfiring, or the same rev limit).
I need vmax, increase rev limit and Stage 1.
Is anyone now a good tuner for a BRP?
Not for free of course
I have changed the gateway module in my car with a second hand one beceause of water damage. Now it has component protection on it.
Is there someone who can take the cp of remotely. I do have piwis 3. any help is apprciated. Its a panamera 4S 2018
Hello friends.
I have a Renault Trafic 3 edc17C84 1.6 dci biturbo.
I tried about 7 solutions dpf scr off , inclusive swiftec , manual solution etc.
With all the solutions I have the same problem, limp mode 2500-2800 rpm.
I tried all the options for removing plugs from sensors etc. DPF SCR have been reset before read.
With the original it works fine if I reset the dpf.
If anyone has experienced something similar and has a solution, I would be grateful.
Hello,
I tried to add a new key to a bmw x5 e70 3.0 diesel with Xtool D9Spro and it asked me to downgrade the flash in the cas, in the end it gave an error that it failed and I can no longer communicate with the cas and the cluster is not turning on. I didn't get to make a flash copy before, I only had a copy on the eeprom. Can someone help me restore the flash.
Cas 3
61.35-9147222-01
2090822410
5WK4 9514XBR
I attached the copy to the original eeprom before it was corrupted and the current corrupted flash + eeprom
Hey hey! I am a single father with 4 children. I quite recently hurt myself in a serious accident and lost my right lower leg. Before the accident, I worked as a self-employed person as a repairman with welding, milling & turning, among other things. Most often in large industries such as the steel mill in Avesta Sweden. Now after 6 years of rehabilitation, I have become more interested in cars and programming. have had tuned cars since i was 18 when i built my first bmw turbo. Since then, many have been passed. Like a bmw e30 with 760whp an e46 with 886whp and an audi s2 with 1033whp. but programming them was completely different with different aftermarket injectors such as maxecu fueltech mf. Now I'm running kess v2 clone and have been trying to get Winols working for several months. I get it to work but then when you restart the computer the crap is gone. have probably installed it at least 12-13 times now so you start to get tired. I don't know what I'm doing wrong. have turned off every single security thing in windows defender. Still, the shit disappears. Have a Nissan navara from 2016 with 231hp v6 now with broken EGR that I would like to program away the egr valve then take the opportunity to increase the power a little. Is there anyone here who would like to help me arrange it? I know there is an enormous amount of knowledge here. Does anyone even have a file that I could use to fix it? Thank you in advance for your help!
Hello, So I have a Navigation System that is for a 2020-2023 Nissan Pathfinder that I am fixing but the problem is that I want to power it on without going back and forth to the car so I wanna know if there's anyway that I can power on by wiring it to a 12V DC source here's the part number for reference 25915-6TH1C.
hi guys, i need remove this dtc from my ecu 11 - Front left wheel sensor - present 93 - CAN bus error from DDM/DDE - present 41 - Rear right wheel sensor - present
i have read from mpps v22 (partial read) and from kess v2 (full read i think)
I would be very grateful for that or for some advice. I tried it in hex via winols but without success.
I paid to buy software then we waited 8 hours for a download line to be delivered, I received one with non working software I wrote to them for a long time they didn't answer then they said they would fix it and after 10 hours I wrote to them again if they can't provide what I ordered to refund my money. again no answer and then I told them I would file a complaint and they answered (good luck), Beware fraudulent software trading site,they also have a facebook page https://www.stage-ecu.com
these are photo links from my correspondence with the scammer
please , need help , programming bcm rear , porsche panamera 2012 , immo , I have Piwis 3, v42 + 38, vmware, I don't know how to do it, could someone with knowledge do it? I pay
I paid to buy software then we waited 8 hours for a download line to be delivered, I received one with non working software I wrote to them for a long time they didn't answer then they said they would fix it and after 10 hours I wrote to them again if they can't provide what I ordered to refund my money. again no answer and then I told them I would file a complaint and they answered (good luck), Beware fraudulent software trading site,they also have a facebook page https://www.stage-ecu.com
these are photo links from my correspondence with the scammer
I know the name of this in the code Skoda Kodiaq
I tried Leuchte12NL and Leuchte13NL but it didn't work please help me to know the name in the code board
I know the name of this in the code Skoda Kodiaq
I tried Leuchte12NL and Leuchte13NL but it didn't work please help me to know the name in the code board
