Hello all,

CGDI MB and KTAG both are driving me insane...

I am trying to clone a ME9.7 with KTAG but it gives me hardware configuration error. I have tried the pads in the front and BDM on the back of the board. I've got it hooked up to bench power. I've tried 12v, 24v, all the amps it needs. It still does not work. Please I really need help you guys...

hey, can you find the highest mileage in bmw edc17c50?
b.r.

Attached Files

17c50 AT read.rar

7

6.6 KB

Download

Hello

can somone make immo off
Santa fe
2002

Try several solution but car or not start or start with problem one time and have error what cant be erased.

Thx in advance

Best regards

Attached Files

Thumbnail(s)
   

flash ori_2ef3a8d6-e125-49e2-9b95-d875d948b183.zip

4

135.51 KB

Download

Hi guys i need this file activated someone can help me?
Is it possible to activate this file or do i need to reinstall another software ?
I found a couple of keygens but none of them are able to activate any type of file.
My license is since 31.12.2020 not active.
Software is ESI[TRONIC] 2.0 from 2017/2.2.00.002
Daten-Version: 11.2.7
Program Version: 11.1.3091

Thx in advance guys

Attached Files

licenserequest.zip

7

144.28 KB

Download

I need help someone to win [font="Segoe UI", "Helvetica Neue", Helvetica, Roboto, Oxygen, Ubuntu, Cantarell, "Fira Sans", "Droid Sans", sans-serif]fault code P055514 Fiat 500ff 1.2gasoline 2019. I want to erese this DTC totaly from mask softwere. ECU ILAW 5SF9 I have flash and eeprom ECU also dump from eeprom BSI. I have done a lot for fix it, and changes ECU, but if u a drive sometime this dtc coming. [/font]

Attached Files

51969000_5sf9ms_fiat_500_1,2l_ori.rar

1

261.01 KB

Download

hello,maybe any one have edc16 eeprom checksum calculator ?
i have weird problem with edc16cp34,after cloning ecu,car drives about 100km distance,you can shut and start car,but more than 100kms,car not starting.
when rewriting eeprom,again,you can drive again 100km
how can ecu recalculate cs after driving,you can drive for 3 days,but if you drive more than 100km ,again,no start,rewrite eeprom in ecu ,and car drives

Hi im looking for easy to install version of xentry I have troubles with w221 s320, i need to check DTC, what should i choose, now i have xdos 24.9.4 but it does not work. I prefer older versions of xentry, with fullfixes available

hi friends. need help for pinout on sam.


At my garage I have a W176.
I have activated the ambient light and it appears in the screen.
I have installed everything and I want to find the pinout at the SAM for the four cables (green, blue, yellow, red) so that I can make it work.
Is there anyone that can give me the pinout for these four cables?

Attached Files

Thumbnail(s)
       

[font="MHH Font", Calibri, sans-serif]Hello Board , [/font]

[font="MHH Font", Calibri, sans-serif]I’m still struggling with my ECU modification DPF off and Stage 1 Tuning + 20% power [/font][font="MHH Font", Calibri, sans-serif]https://mega.nz/file/pmkkXSjK#mq65WoEb0V...YdHH6jw_X4[/font]

[font="MHH Font", Calibri, sans-serif]Thanks my mates for helping me out unfortunately Delphi crd3.3 is as new I cannot find any Winols Maps to Open my one ![/font]

For Sure I will donate
[font="MHH Font", Calibri, sans-serif]Thanks Chris [/font]

Hello   mates need dpf off  for this car  thanks in advance

Attached Files

audi a4 1.rar

2

415.33 KB

Download

Hi guys

may i have immo off or virgin ecu

car is a 1.4 ecu is g9mk ecu

need to start this car

regard

Attached Files

fiat gweru 1.4 g9mk ecu.rar

2

1.57 MB

Download

Hi,

Need flash for BSI VALEO :

Functional Plan No:            9654425680
Manufacturer:                  Valeo
Functional Product No:        9659285580
Software Index:                06.00
Diagnostic Index:              E
System:                        B2
Software edition:              13.03
Software signature:            12.1A
Software reference:            9664621280


Thx!!

Hi. We're repairing Mercedes Benz w212 facelift hybrid. Customer brought to us another transmission unit (a2122702210). Does immo system are included in the TCU? Is it possible to clone the TCU? Or we can change the whole transmission unit and adapt used unit to the car? Since it is FSB4? Old transmission unit was not able to change gears it is stucked in neutral, no adaptations other funcions helps. Thanks

hi
can somebody help
need to set vmax to 140km/h

VW passat 1.9Tdi EDC16U34

Can anybody check here software version and coding for tcu, I bought preprogrammed but not seems to work with the car now 
Vin: WDD2040012A531828
 Thanks for Your time guys but stuck with it 3rd week now

Hi
I need stgae1 for traktor John Deere 9030
Read KESS3 OBD

Attached Files

John Deere L15_SW_RE549246_-SW62262A_John_Deere_9030_.zip

11

19.34 KB

Download

Hi all.

I have an issue with a C5 corvette which has been around the block once or twice with attempted repairs before ending up with me!

The obvious solution now is to simply immo off. 
Its now with me with a good ECU, the Ori bad ECU, 3 BCMs and god knows which key is which!

Attached is the 28F400 data read out of circuit with TL866


Thanks all

Attached Files

Corvette C5 Intel AB28F400B5-B@SOP44 read.rar

4

214.67 KB

Download

Hello everyone

Does anyone have a Damos controller for the Mercedes Sprinter EDC16C31 2.2CDI?

I have BDC ecfgs. Looking for XCALS and ecfgs for 07.5-9, 10-12 ram trucks and 19-24 ram trucks also any Auto trans xcal files for 13-18 2350B and 2350F. Stock is fine! Thank you!

Maybe someone have Opel Ampera-e 2016-2022 A11(radio) calibration files and could share ? Or can get from vin ? W0VF86E08J4113841, W0VF86E07K4119163.

Hi Guys.
Maybe someone works in ford service ... and could help me with this ...

WF0SXXGCDS9U76561

Need to know what exactly part number or Bosch number of ECU should be in this car.

Hey guys...please share bench pinout to test this hilux ecu on bench with can h & can l pinout please

Really need communicate with ecu on bench

Thanks

Sent from my SM-A235F using Tapatalk

Hello guys,

I have dq400 gearbox having issue with this fault code 


P086700
Transmission Fluid Pressure, Function Restriction Due To Low Pressure

I checked mechatronic was clogged with black dirt this car been to other garage i dont know what they had done so i removed mechatronic found this issue cleaned everything no rings damaged nothing found so thought maybe give a try after rebuilding everything but i am stuck to fit the  metal retainer for solenoid to fit back in place i dont know how it going to be fit anyone had any clue or instruction to do it will be appreaciated 🙏🏼

Hi all, looking for the correct Psdzdata Full for the i-Level [font=Inter, "Inter Fallback", sans-serif]F056-17-03-503.[/font]

[font=Inter, "Inter Fallback", sans-serif]Can someone share?[/font]

[font=Inter, "Inter Fallback", sans-serif]Thanks in advance.[/font]

Hello!

I have wiring diagram for Opel Astra J 2010
VIN: W0LPD6EB8AG126338
I  am looking for EWD steering column switch on turn switch left side. Unfortunately not working menu-, clear-set, scroll buttons but turn and high beam function ok.

Thank you very much.

Hi, i have Fortuner 2005 with 120km/h buzzer.
As I Know it is in Dash EEprom.

Can someone turn it off?

Attached Files

CAT93C66(x8)(S)Fortuner IC.rar

1

303 bytes

Download

Adobe discontinued Flash Player, well I am in need of it . Anyone have a download? 
Thank you in advance

Hi, need tested immo off solution for Fiat Doblo MJD8F3.D5

Attached Files

Fiat-Doblo-MJD8F3.rar

2

663.73 KB

Download

Hello,
I would like to activate the ILC+ on my 2018 V-Class with LED headlights. I have code LG2.
Can anyone tell me which control unit I need to change with Vedeamo to activate this?
Thank you in advance.
Best wishes
Christian

Hello
I need code redio RCD 310
VWZ1Z2N1388552