Hello boys
I installed a relay on the ecm on this fiat scudo edc15c2.
the problem is that the relay starts 1 second later and ecu records the following DTCs:
i need remove this dtc from ecu:
P1517 P0246 P0401 P1404 P0380 P0243 P0403
I'm trying to change the country code of the bsi module UK to Europe specifically for the dashboard with launch xdiag 431 and it asks for a pin. Please help.
ZFA25000002861953
Thanks
2014 Chrysler Town & Country 3.6L
gpec2
62TE 6-speed automatic
68206610AK ecu number
also attached wcm dump incase possible to do not existin in the car elv off
68105738AE wcm number
T0000131470136
B2254 Chrysler Code - Column Lock Module Internal
Gen2 Wcm module
68105738AF 68105738AE which has remote start
SKIM error and it won't turn over. Locks and unlocks but won't start. Any way to fix this or is the WCM screwed from running the ELV replaced. The ESCL stated parameters out of range.
i try to make wcm virgin but didnt help , attached original dump and virgin
thx and i understand this is not free solution and willing to pay for tested solution
Hi, I did camera 360 retrofit in W447 2021 with MBUX. Comunication with cameras is good, system works properly but when I changed display from small to large and change codings in SVS205 I have serror "not configured". When I read codings in monaco all is complete but on up is information about checksum error. I try change checksum codings, not result. I have codings from another car but with no result.
[font="MHH Font", Calibri, sans-serif]Hello to everyone[/font]
[font="MHH Font", Calibri, sans-serif]is there anyone that can help me to clear crash data on a Ford Fusion 2015 Hybrid, Airbag Crash Data[/font] [font="MHH Font", Calibri, sans-serif]Ford Part Number: ES7T14B321AA[/font] [font="MHH Font", Calibri, sans-serif] Reading from [font="MHH Font", Calibri, sans-serif]95640 ST eeprom[/font][/font] [font="MHH Font", Calibri, sans-serif][font="MHH Font", Calibri, sans-serif]your help will really be appreciated, am looking for free help :sadsmile:[/font][/font]
I have subscribed to FDRS and installed necessary drivers for Vxdiag J2534 Ford device. FDRS is having weird problem as it doesn't detect neither Vcx driver nor Cardaq 3 driver. Only showing Autel drivers although all of them appear in J2534 Bridge app.
Hello colleagues, I have a Chevrolet DMAX, was read with clone tool, I tried to perform checksum correction in StageX, but could not, someone can help me? Attached Ori and Mod Thanks in advance
I need an original file for the software [font="Public Sans", sans-serif]CW83-14C204-RTE
or something similar at least [font="Public Sans", sans-serif]CW83-14C204
got a car in with some really crazy s**t going on lol[/font][/font]
got strange issue with opel astra j equipped with ac delco e78. After decat dtc P0420 still present in eobd mode and is not erasable.
Anyon got this issue before?
Attached ori file and file which i already have flashed.
Tried in obd and bench mode with kess3, , same issue.
i have an audi a6 2012 auto transmission that crancking but no starting the engine, there is no sparking on the plugs, i have changed the caranksheft sensor and (ECU that was auto transmission)with checking the wares and also the RPM is not moving at all even with starting but when i putted another ECU that was for manual transmission the RPM is moving but not with auto transmission works
Hi to all MHH members,
i have a Mercedes W177 A180d with MD1CS006 ECU the same as renault , nissan TC298
i was finding some software that can do DPF , EGR ADBLUE OFF for that ecu but i can't find a good solution
i have tried Davinci 1.0.28 and dpf remover
i have tried even with DTS monaco to disable adblue and dpf and it works I have disconnected adblue pump but i still get some dtc U0601 and P2463
I read with amt bst mine ecu someone can help me with that
I got a special problem with my headlight ECU from a 2019 W205 C63S 205.487 and I hope someone can help me on this issue or show a way to the solution.
So my Xentry works fine, I can start shorttest and see all the ECUs and Faults on it, as well as I can clear the faults and have access to most ECUs of this vehicle.
But as soon as I am opening the Headlight ECUs, I got an error message with Code ASCC_4010.
Maybe someone had the same issue and have found a workaround or something. As mentioned everything else works, I can access the Engine ECU and see the fault codes and so on, as well es the Headunit ECU or the Transmission ECU. Problem is just when I open SG-SW-L or SG-SW-R ECU.
Hello. I need help in immo off skoda octavia 1.8 med17.5. Tried solution with flash 5714-5717 but not working. Maybe i messed something. Can somebody help?
Thanks in advance!
Hi guys
Need a help with corrections
cluster visteon 2019 95640 on the board current value 77105 miles or 124139 km
need 58000 miles or 93380 km...
Thanks in advance
