i want to add Head Up Display and Heat front Seat on Volvo XC90 SPA and i have Smok programmer to write configuration to CEM but i cant decode Dump for it, i want to add Head Up Display and Heat front Seat on Volvo XC90 SPA and i have Smok programmer to write configuration to CEM but i cant decode Dump for it,
i attached dumps for Flash CEM and configuration that read via Smok programmer.
How can i add HUD and Heater front seat to this car ?
I have a used BSI E01-00 for partner.
need to install without cloning eeprom, as when i do the ac configuration option stops working (in many cases).
To avoid this i need someone to reset the mileage to 0mi and tell me the pin or change it to KFE5 to match the ecu (better if you can tell me how to find it myself in hex),
NB: i only need the pin to set up the key remote, i already did immo off ecu.
I have an interesting problem. I am trying to replace my ME9.7 ECU by virginizing and adapting with a TOPDON Phoenix Max. First I tried a Chinese ECU. It was able to be read using CGDI but I could not make it virgin. I assumed it was already virginized as it said NO to being personalized and adapted. I tried programming it with TOPDON using cloud programming and then adapting but it failed due to CAN errors. I assumed the Chinese ECU was junk. So I bought a donor ECU. When I tried to read the donor ECU using CGDI it would fail. I tried the Chinese ECU and it failed as well. I also tried to read the original ECU and that failed too. I got frustrated and tried to program the donor ecu using TOPDON anyway without making it virgin but it did not work. I figured maybe somehow my CGDI was defective but I was using a 1amp AC adapter so I figured I would try using a bench power source. The bench power arrived and I am now able to read my original ECU but I cannot read the Chinese ECU or the donor ECU.
What is common to the Chinese ECU and the donor ECU is that both were attempted to be programmed by TOPDON. They are able to be read by TOPDON so I do not think they are bricked but CGDI cannot read them. Are they corrupted in some way or in some kind of boot mode? I am very confused.
I'm tring to save coding (for example CBCBOLERO.CBF) using SAVE FILE. I receive error: "error while communicating with the ecu caesar:comcoordinator: 02026:Service error: unknow message in odb mode, because service used in cbf-file not allowed (e.g. CP_resetheadermode ==Functional for download/upload)"
CBF files used are from Xentry. I can code some parameter.
Vediamo 5.01.01, Win11, Pass thru - OpenPort 2.0 Tactrix, W117 Facelift
Hi guys, who can turn off AdBlue on my Mercedes Benz? I have a bad AdBlue pump (for the second time). Who can deactivate the system with the module unplugged?
Hi,
I have one that I can't diagnose, namely a damaged LCD panel (Multivan) - it displays everything in yellowish colors instead of white and a blurred "Service mode" mode, when connecting a regular display (Other RNS) everything displays correctly.
I have already resoldered the PIC from the working one on the LCD board, checked the resistors and fuses around it. Has anyone had such a defect or is it maybe the display itself damaged (unfortunately I can't move another one - different connectors to connect).
Please advise where the fault lies?
Attached is the work on the working panel and the damaged one.
Hi just got a launch smartlink c which software would anyone recommend to activate for one year Diagzone Prodiag Xprog5 or xdiag currently using Diagzone on my thinkdiag vci?
Hi
I am having some issue to turn off the egr on bmw edc17c50, after egr off no error codes but car jerk in the 1st and 2nd gear. I have used davinci but no luck, kindly can anyone please provide a working solution for this ecu. Thanks
