Hi My Mercedes convertible 350E 2015 has 360 camera the front cam has a crack in it, I have got a replacement from China part number matches the original A0009051103 which works okay but the new one Doesn't work I get the error code b1fbf01 the 360 camera at front end has a malfunction there's a general electrical fault some one said that it needs coding the online videos say it should be just plug and play? can anyone help
Guys is there anyone who is available to help one of my trucks in Germany?
It is Atego and has adblue problem, speed limited to 20km/h
Anyone who can help, diagnose, switch it off , whatever, payment cash !
Location is: Altdorfer Str. 11, 92318 Neumarkt in der Oberpfalz, Germany
PM for contact and details if anyone can help! Thanks!
is there anyway to check if this is tuned, just baught the car the old owner said something about ecotune.
want to now if some thing is done to it and if egr and dpf is still active, Thank you
I'm a bit in trouble.
I used MMS service to clone PCR2.1, but eeprom not working at all (wrong pin, ecu still locked, bad VIN ..Etc..)
I wich i can learn to do it myself, if someone can explain it to me ? It's better than doing it for me
I've got those informations (ecu are the same, same stickers, same engine code ..Etc..) :
OLD ECU :
- CS : A6734FA747F100
- MAC : 653740E7
- PIN : 25055
- Power class : 2F
NEW ECU :
- CS : 5BE32D8A11DF00
- MAC : CE285634
- PIN : 58200
- Power class : 3A
As far as i have understand, Power class need to be the same. both ecu are from the same engine code and same year, why are they different ?
Power class seems to be in the FLASH and in the eeprom (not sure where i read this)
Please find attached :
Backup of old ecu
Backup of new ecu
If someone can help in anyway (learning to do it will be better for me, i prefere to understand what is done and how to do it ^^)
Fiat punto from 2002.
Anyone can check if this virgin is done properly? Made virgin with I/O terminal on donor ecu with same HW303 as original ecu but car dont start with virgin eep. Original ecu dead and no coms. I even have pincode of donor ecu, possible to sync with autel or launch with the car? Didnt test to connect and try that way.
Hi i have tried to remove DTC P1541 with dacvinci, fautl code and engine light stay off but engine still going to limp mode.
Anyone able to remove it correctly it?
Hi,
I try to start E92 M3 2008y from US market. Car was bring without ECU, CAS and JBB.
I put other ECU do sync (vin isn) to CAS3 and add keys.
Is there ISN in DKG gearbox also store? What tool can read that TCU ?
Car switch only CCC after putting key in slot. There is no KL15. And no starter.
There is no error in cas or ecu.
I dont rewreite ECU and CAS vin for car vin for that moment, try to start it with ori ECU vin .
Hi All,
my 02E927770AE DSG6 DQ250 is very likely broken.
Is there any direct fit with other versions? I might have found an interesting 02E927770AJ, but I would like to be sure the switch can be (easily?) done.
Thanks!
Hello my good people. I have a big problem and I need your help. I have a Golf 7 2016 1.6TDI 81kw with DCM6.2V. The ECU is bricked, i just have the ori map from OBD VR, no eeprom. I got the same donor ECU from the scrapyard. The car does not crank or start, the fan starts at full speed on ignition. Could someone help out please, what can be done to get the donor ECU to work?
I have 2016 benz garmin map sd card that i plugged into my laptop to see what i can read. Nothing modified at all but, when plugging back into the car, doesn't read.
Hi does anyone have good dump or maybe can repair this one, i have dtc p1735 after trying to calibrate gearbox with autocom, before this car worked fine. Its corsa d 1.2 gasoline 2010 year. Tnx to all!
Hello everyone, I've decided to sell my original VAS 5054A connector since I no longer use it. As shown in the picture, it's been used for a lot of work, including passthrough with other software, newer ODIS versions, and as a VAS device with older ODIS versions. Despite the extensive use, the connector is still in perfect working condition with no issues at all. I'm asking for €500 plus shipping costs, and it will be shipped from Denmark. Thank you, and I hope this VAS connector finds a great new owner!
Price reduced to 350 euro + shiping cost will be sent from Denmark
Can anyone check for me this file is already have a bad tune or not. I make DPF off with Davinci but got a lot of black smoke. Maybe this car already tune before.
I have quite weird problem. Opel Astra 1.7 CDTi E87, Ihe dtc P0111 but readable only in EOBD. When I select via diagnostic the right car and ECU, there is no DTC and in live data I can see that the IAT sensor gives the right temperature to the ECU. The problem is the DTC is only in EOBD and it is permanent, so the error cannot be erased.
I tried to disable the DTC, I even tried to disable all the DTCs, but no luck.
![[Image: 20240902-061015.jpg]](https://i.postimg.cc/J4tNVB39/20240902-061015.jpg)
![[Image: 20240902-060958.jpg]](https://i.postimg.cc/VvkjNJx0/20240902-060958.jpg)
