i read my gearbox with 6hp quick flash, and i was thinking to increase torque limiters.
anyone willing to point the torque limiters in my file ?
i wil also atach a tune send from a friend.
anyone can have a look if its made ok ?
thank you in advance gentlemen !
Hello i have problem i have module seat ibiza 5QF959655L. In car i have no comunication fault , but i can enter to modul but can read faults and i dont have vin. On bench simmilar problem
TUNING DATABASES for SALE - SPECIAL PRICE ONLY FOR MHH MEMBERS
1. 1250 WINOLS projects (.ols) with all kind of solutions (stage 1 2, scr - adblue, dpf, egr, flaps, tva, pops and bangs, mappacks, etc.). This is real projects made by my company over the years, all files are tested on our dyno and all solutions are tested on the cars. ECU included: MD1 - MG1 - SID321 - EDC17 etc. Works with all winols ( 2 / 4 / 5 and are not locked).
2. MHD tuning maps decrypted for BMW PETROL TURBO ENGINES!
Stage 1, 2 and some 2+ with different fuel combinations 91, 93, e30, e40.
Maps come with the original bin, tuned files and the tuner pro xdf for editing.
3. BMW 6hp XHP database 6hp18 6hp19 6hp21 6hp26 6hp28
STAGE 1 2 & 3 all kind of variations.
Whoever is interested will contact me and will remotely connect to my computer to CHECK that all files are real, different and not % tuned! I can provide INVOICE without VAT (0 VAT for companies registered in EUROPE for VAT or companies outside of EUROPE). Or payment possible VIA Revolut and/or Paypal - SERVICES AND GOODS!!
Car had no crank. Haven't tested out second key yet. Did a swap to a new key housing. When pulling out the transponder a small piece of housing came loose. Looks ok to me, but still doesn't start.
Toyota Aygo Ab40 2019. If damaged, could I just buy a blank one and copy it from the second key? If so, anyone knows what chip I need?
Can someone help me inject more fuel? I tried adding +15mg, but I didn’t feel any difference in performance. I couldn't find other maps either.
I want something around 480Nm and 230-240 horsepower.
im working on a Renault modus, wich initially had a broken steering rack motor, i change it with a used one, and made it virgin.
in the process i also made the UCH virgin and keys are erased, but i have the PIN and ISK read from before with Renolink. i have not found a way to write the original PIN and ISK back into the UCH, not with Renolink at least.
now i read the eeprom, does anyone know how and where the PIN and ISK are stored?
i will share the eeprom here,
i need to have this information inside
Pin
456F53855B6B
ISK
A06A13695485
i tried with Clip writing the keys back in, and i cant, its asking me that the unit is virgin and requires coding; but to complete that in clip, you require a working key.
i tried Manually adding the key in the EEPROM with abrites, but still i cant pass the process and keep on getting problems.
if anyone could be able to change the eeprom to have the correct pin and isk given above, i think i can solve the car.
Anyone know how to enable recovery mode on the JLR Bosch VCI? Usually there is a button behind the bottom rubber to do it on these Bosch VCIs, but that button is missing on this type. I've attached a picture of the VCI type. It's the kind with a LCD display and arrow keys.
I have made a terrible mistake trying to flash the ecu on my sprinter 2012 crd2_nfz with think tool master .the flash process failed and i cannot reflash it anymore with using the same tool .
can some one help me to flash it via vediamo or dts monaco i really appreciate the support
Hello my friends,
I would like to ask a question.
We have two identical cars with the same engine and the same ecu. (edc17c64)
Can I take the flash file and write it to the other one? The only difference between them is that one is DSG and the other is not, but I think in these ECUs this is a coding through VCDS.
Will it work? Or is the immo data also in the flash?
Tried two different tuners to get car fixed. It has a TVA that flips out when connected. Second tuner fixad faultcodes on TVA, but when driving without TVA connected, it puts C007300 Torque delivery fault code in engine ecu.
Hes not answering anymore..
Somebody here that can help? Volvo XC90 VEA 235hp.
Files are attached.. Orginal and the file with many DTCs off..
Hello, i have a Levante 2016 diesel, i refilled adblue to full tank, the gauge in cluster shows full but
the remaining range is 770km and its going down and the engine will not run after this value sets to zero, i tryed to reset with Autel and Launch but not success
Hi guys, i have rpm issue in corolla 1.4D4D the speed engine not stable from 0C° TO 60C° after this tempurature level the RPM return to normal , can anyone fix this issue in map? help me pls
NOTE: NO DTC IN ECU
can someona help? I need your help in giving me full back up with MPC because mine was destroyed due to a wrong reading and I cannot use it now. Please, I need to have communication to cas. if there is someone who has it, help me please.
Thank you.
Good day, I have a Ford mondeo 2008 TDCi. I have the control unit:
Siemens VDO SID206
5WS40592E-T
7G91-12A650-YE.
I would need help with IMMO OFF on this unit. What are the options so that I can turn it off? The car won't start, it won't read the key. thanks for any advice, sorry for my English
Does anyone know how to set Prado 150 2015 model central differential acutator timing? I've tried watching many YouTube videos, but none of them work 100% accurate.
[How to install ] Offboard Diagnostic Information System ODIS S 7.2.1 & E 12.2.0
