i have tried a couple of auto solutions ( Swiftec , Davinci )
with swiftec solution i dont have a limp mode at 3000rpm but under 1800 rpm i have the car hunting and if you look at he maf sensor reading its jumps up and down.
with davinci car drivers perfect and suddenly it goes into limp mode at 3000rpm.
anyone that can help me here would love to figure it out .
Specially I wonder if theres a terminal 15 or 87 routed to the module since the processor is totally dead, no clock at all. +5V present, CAN driver TJA1055 OK.
Thanks a lot.
i need help with upgrading my m57. i want to fit the r90 with the m50d Rail Pressure and Rail Pressure Regulator in my M57n2 and need to linearization in the correct way that the car runs.
part number
rail sensor: 0281006245
pressure regulator: 0281006245
i found an installation guide vom Dieseltuningparts but i dont know if the Sensors are the same and i dont have this for the fuel regulator.
can someone help with a Sharan 2011 2.0tdi EDC17c46, they done a addblue off to the car , the turbo has problems now the car doesnot run correctly , i want to restore the original file to adblue ON , and eventually another file if the adblue on solution didnot work , another file to do Adblue off with working start stop function.
Hello ! I got a bmw e60 520d 2005, and got a lma with ahl and i want to code them, i need to change the vin, got all the bmw programs, and someone send me a how-to ? Thanks!
Yanhua BMW ID8 Special Filter for BMW 3/4/5/7/X5/X6/X7/XM G Chassis ID8 Instrument Mileage Correction
Price: €58
YANHUA special filter for BMW ID8 is applicable to BMW 3/4/5/7/X5/X6/X7/XM and other G chassis ID8 meter mileage repair.
It dosen't require soldering, only need to plug in the car odometer plug and socket. The installation is simple, safe and reliable.
Key Features:
Plug and Play, Safe & Reliable
No black screen, No red dots
DO NOT affect the start-stop function
DO NOT affect the maintenance mileage
Supported Car Models:
for BMW G series ID8 odometer such as BMW 3/4/5/7/X5/X6/X7/XM.
Hi guys, I need a schematic to connect an EEPROM to a CarProg programmer as soon as possible, preferably without soldering. Maybe it's the 6 pins that are sticking out on the board. Thanks in advance."
Hi
i need km change
S-max 2010 2.2 TDCI
EDC 17CP42
I did it myself but I get full filter errors after several starts (I did the reset), maybe a bad checksum.
312365 to 220165 km
I am attaching the original and my file
Many clients are asking me for dpf-egr-adblue off in industrial machines and trucks, and I am having many problems with the files, I have tried two different file providers, but each vehicle requires weeks of testing, changes and work to not be able to provide a solution, having paid for the files and not having a file that makes the machine work well.
I would like to know if anyone can advise me on a person or company that can provide me with files, obviously paying, but I would like them to have as much experience as the trips are long, the times are long, and I cannot have machines stopped for weeks without providing a solution. I understand that the files do not always work 100% on the first attempt, but I want to be able to provide solutions with the highest quality possible.
Hi, friend from me send gearbox ECU for Repair and Post is lost it
he looked for an new one and Buyed a 0B5 927 256 F with Software 4G1927156B__0006
he made Inmobilizer by Audi Dealer, all ok, but now have Error Wrong Software P0614
now he checked with VIN and Original one should be 0B5 927 156 K with Software 4G0927166C__0009
i tried to programm this Software with VCP but can´t write, not compatible
maybe you know which Software Release should take for reprogramming?
Audi A6 Avant 30TDI 272HP Engine: CRT
Year 2017
VIN: WAUZZZ4G7HN070714
Br Joachim
Hi, Ive seen it posted here on the forum for free but all the links are dead. Does anyone have MG1CS015 Ford raptor damos they are willing to share?
Thanks!
Hello,
I have two 2016 - 2019 IVECO Daily one is 2.3 and another is 3.0 with same errors. I don't have the history for cars, just coincidence same problems came in our shop.
So far, we have changed the following on 2.3: New lift pump, new high fuel pressure pump, fuel filter, fuel regulator, another original genuine ECU file, new timing belt, looked for damaged wiring and repaired a few..
The car starts perfectly, Rail pressure stays constant ~300bar. Sometimes when cold it accelerates without problem and pressure goes ok, but after 15minutes when I accelerate the pressure drops. If i accelerate slowly it stays between 300-400bars. If i kickdown it goes straight to zero.
![[Image: 25030417411419926217.jpg]](https://www.eobdtool.co.uk/upload/pro/25030417411419926217.jpg)
![[Image: 25030417411419902026.jpg]](https://www.eobdtool.co.uk/upload/pro/25030417411419902026.jpg)
