Hello, currently have an issue . I changed old tail lights to LED lights. Changed connectors .Brake light flashing couple times then message shown up on IC that lamps are not working. But they work. I would appreciate if i could get some ideas what to do . Thanks.
Hi all. I have a car imported from the USA and I need to change Fahrenheit to Celsius on the climate control control unit. Has anyone already done this procedure on these cars? Since in older models it was enough to solder the resistors from place to place. But in this model it is not yet clear how to change the Fahrenheit readings to Celsius. Control unit number 88650-60V70. I also read the EEprom from the climate control unit 93С76, maybe it can be changed
the car has 4,000 km. It does not work on one cylinder (3). There is fuel in the engine oil. Compression was ok. The injector was replaced with a new one. Is it possible that the cam on the shaft has rotated? a strange knocking sound comes from the engine. there is a signal from the engine controller to injector no. 3. No DTC
The fault appeared during a flood. The engine did not take in any water. The car was submerged as far as the muffler
Hi guys, I need to deactivate the VAT on this vehicle. I always deleted the string F0 0A F0 1A F0 2C 00 00 F0 0A F0 1A F0 2C and it worked correctly, but I can't find it on this one.
I am looking for ori content BMW F30 3.0L Xdrive engine M54B30 326HP on ECU MG1CS003 8489450-01 0261S19745 sw 10SW02152 the most important thing is that in the address 0x736CD0h to be located an ascii string R1C9J8B3BCEYX3 .
hi everyone
can sameone help and do immo off for this file VW md1cs004 mcid is 40800c100cc01a0a1b74432100000000
you can find the file in the link https://filetransfer.io/data-package/9FksIqqk#link
thanks
Howzit need some help have this 2020 Foton Powerstar FT8 truck need to program dash mileage what's inside MCU my guess any connection points form back of cluster ? Advice appreciated
hello I replaced a srs ecu on volvo xc60 2016 I transferred the eeprom 95128 data and I have several permanent coding faults the original program must be corrupted
can anyone repair the file for me?