I have a problem with this car. sprinter 316 om651 2014 new injectors, when it is cold the engine runs badly and error p0263 comes out, can someone check if the file is correct? what if there is a problem with the file?
Lonsdor Tech has recently released the Lonsdor DOIP Cable, designed specifically for use with the K518 Pro Full Version and FCV Version. This cable enables smart key and all keys lost programming via OBD for the Geely Monjaro (2021-2022) and Buick GL8 Century (2023-). The process is risk-free and user-friendly.
Hi all so my 1KD has had injectors replaced and were recoded. But now it's got a P1601 code stuck on. I looked into it and found that values for cylinders 2,3 and 4 all looked somewhat normal but cylinder 1 doesn't look right. Anyone able to point me in the right direction? Have done a pilot relearn and all injector compensation codes have been coded in correctly. Thanks in advance.
Hi. Need Egr off on peugeot 508 1.6hdi sid807evo. Some one make dpf off but egr still work. Have dtc when egr connector disable.
id HW: 9663241480
SW: 9666681180
Read by Ktag clone
Hi guys, does anyone know how to permanently remove the RSA sound notifications in Toyota? It is very irritating and unnecessary, disabling in the menu restores the previous state after re-ignition off-on.
Hi everyone, I have a 2013 mazda atenza diesel that is an import, the language on the cluster is in japanese, I have found several places on google that offer to change the language to english, however I can not find any info on how to do this myself, i figure it requires a custom flash to the mcu or eeprom, hoping some one here has accomplished it and can point me in the right direction.
Hello, i have audi q7 2018 hybrid after accident. All airbags was deployed. Managed to clear crash from airbags.
Car is starting and not charging
There is crash stored in battery energy control module p160900 crash shut off was trigerred.
From my understanding hv battery is disconnnected.
How to clear that crash? I have odis, smok uhds, vcp
Thanks for yours answer
I have a 2019 Ford ranger wild track AU version, I'm trying to adjust the odometer for such cluster.
I have used Mtool/Stool 1.64 tool & I-prog pro v87 with no success.
With Stool, I have been able to read the KM's but not write the Km's.
I used Ford explorer 2015+ V1 and V2 ( the cluster is somewhat the same as the Australian Ford 2019 Ranger PX3 Wildtrak). can read the odometer value, but when I change and write back to the cluster I receive a seed key error once it was attempting to write the value.
Below is the calibration and strategies of the cluster itself
Port opened.
Setting adapter to 500 Kb.
Attention, fake ELS27!
ID F188: JB3T-14C026-HA
ID F110: DSJB3T-10849-DA.
ID F111: JB3T-14F094-PA
ID F113: JB3T-10849-KG
ID F124: JB3T-14C088-CE Reading mileage.
I have a dump the 93c86 EEPROM attached. The MCU is R7F701408.
Is there any way to change the ODO with such tools or manually within the binary itself? or is it in the MCU? i have tried contacting the support for Stool, but bloody no response! Wish I never purchased their software!
Also is it possible to power it up on the bench too? Overall, all I can power up but doesn't fully display cluster.
Hi,
need help with this car,
i disconnect sgw to erase faults, now after connect back i have - - - on KM (was ttoo when sgw was disconnected)
No correction km was made
Dear Masters, respect and greetings to all of you.
There is a Blaupunkt CC20 Cassette Player tape in the car and unfortunately the Tid screen is also broken. We want to match and install the Tid screen and Blaupunk CD30 mp3 tape we bought instead. I know the codes of the tape and Tid screen, but I need the virgin file of the 95640 eprom of the tape. Can you help me with the Virgin file?
have a nice day
Hello, please advise. Does anyone have a tip on a working Ford VCM interface from China that would work with genuine FDRS and IDS? If such a thing even exists? I have one see attachment and it doesn't work and VCI manager doesn't recognize it at all.
Please help me remove immo from this file. I am trying to immo off with immoff17 from neurotuning, but it does not work. (the car starts only when the error code in the ecu is removed).
Hello. I have a crafter edc17c54. Car has strânge behaviour. IT works perfect, no limp mode, no dtc, but in 1-st gear rev stops at 2800, second,third,4, etc stops at 3000rpm.
Till 3000 rpm IT has power everything ok but when IT reaches 3000 IT does not pass that. Sometimes (1 from 10) IT revs past 3000.
What i saw and tried.
Downloaded vread file and write IT, same, și not software issue.
Renoved dpf and did dpf/egr off, same
Unplugged egr connector same
Unplugged maf, same
What i saw, strânge.
Idle stays ar 900 rpm
The altitude and boost with engine stopped show same pressure +/- 10 (alti 1008 and map 1015)
When i start engine boost setpoint js 1050 and i have 1150)
Renoved map sensor and at idle (900 rpm) IT spills a lot of Air through the mal sensor hold (never saw pressure at idle, so the sensor readus well 1150)
Checked vaccum supply ok
Replacet turbo vnt, same
Again i Say, no dtc. Any ideea what to check next? No underboost,overboost,railnerror or anything.
![[Image: 24120517334532479576.jpg]](https://www.eobdtool.co.uk/upload/pro/24120517334532479576.jpg)
![[Image: hino25-2.webp]](https://dieselscan.com/wp-content/uploads/2024/12/hino25-2.webp)
